dupsAlarmEconomicMode

DeltaUPSv5-MIB · .1.3.6.1.4.1.2254.2.5.9.18
MIB view Table view

Object

scalar mandatory Enumeration 
The UPS is working in the economic mode
(act like an off-line UPS).

Context

MIB
DeltaUPSv5-MIB
OID
.1.3.6.1.4.1.2254.2.5.9.18
Type
scalar
Access
readonly
Status
mandatory
Parent
dupsAlarm
Siblings
37

Syntax

Enumeration

Values & Constraints

Enumerated Values
1on
2off

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
dupsAlarmDisconnect mandatory
Indicate the communication of the UPS is connected or disconnect?
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.1
dupsAlarmOutputOverload mandatory
The output load exceeds the UPS output capacity.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.10
dupsAlarmInverterAbnormal mandatory
Representing the inverter fail alarm.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.11
dupsAlarmLoadOnReserve mandatory
Does the UPS load on reserve?
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.12
dupsAlarmTemperature mandatory
Representing one of the temperature sensors has been determined its value is out of the limits.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.13
dupsAlarmBypassOutOfRange mandatory
The bypass power is out of range.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.14
dupsAlarmStandby mandatory
The UPS system is in the standby state.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.15
dupsAlarmChargerFail mandatory
An incorrected problem has been detected within the UPS charger subsystem
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.16
dupsAlarmFanFail mandatory
The failure of one or more fans in the UPS has been detected.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.17
dupsAlarmOutputOff mandatory
UPS output is turned off.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.19
dupsAlarmInputOutOfRange mandatory
Representing the input power is out of tolerance. This item is used to indicate the input power fail, a test condition should not set this item on.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.2
dupsAlarmSmartShutdown mandatory
Indicates whether the Smart Shutdown is in progress.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.20
dupsAlarmEmergencyPowerOff mandatory
Representing the UPS is shutdown due to the Emergency Power Off button is pressed.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.21
dupsAlarmUPSShutdown mandatory
The UPS has been shutdown including remote and fault shutdown.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.22
dupsAlarmEPO mandatory
Representing the UPS is shutdown due to the Emergency Power Off button is pressed.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.23
dupsAlarmOutVoltOverLimit mandatory
To indicate the output voltage is over limit.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.24
dupsAlarmOutVoltUnderLimit mandatory
To indicate the output voltage is under limit.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.25
dupsAlarmPowerModule mandatory
To indicate there is at least one alarm from power module.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.26
dupsAlarmOutputBreaker mandatory
To indicate the output breaker is detected open or close.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.27
dupsAlarmOutletBank1Breaker mandatory
To indicate the outlet bank-1 breaker is detected open or close.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.28
dupsAlarmOutletBank2Breaker mandatory
To indicate the outlet bank-2 breaker is detected open or close.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.29
dupsAlarmBatteryLow mandatory
Are the UPS batteries low?
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.3
dupsAlarmOutletBank3Breaker mandatory
To indicate the outlet bank-3 breaker is detected open or close.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.30
dupsAlarmOutletBank4Breaker mandatory
To indicate the outlet bank-4 breaker is detected open or close.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.31
dupsAlarmSummary mandatory
To indicate the alarm level for the UPS.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.32
dupsAlarmRedundancyLoss mandatory
To indicate the capacity of redundancy lost in a modular UPS.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.33
dupsAlarmPhaseAsynchronous mandatory
To indicate the Phase is detected asynchronous or synchronous.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.34
dupsAlarmRectifierAbnormal mandatory
To indicate the Rectifier is detected alarm or normal.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.35
dupsAlarmBypassBreakerOpen mandatory
To indicate the bypass breaker is detected open or close.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.36
dupsAlarmMainInputBreakerOpen mandatory
To indicate the main input breaker is detected open or close.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.37
dupsAlarmManualBypassBreaker mandatory
To indicate the manual bypass breaker is detected open or close.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.38
dupsAlarmLoadOnBypass mandatory
Does the UPS load on bypass?
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.4
dupsAlarmOther mandatory
Indicate there is an alarm detected but which is not defined here.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.5
dupsAlarmBatteryGroundFault mandatory
To indicate the battery ground fault has been detected.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.6
dupsAlarmTestInProgress mandatory
Does the UPS test in progress?
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.7
dupsAlarmBatteryTestFail mandatory
Does the UPS test fail?
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.8
dupsAlarmFuseFailure mandatory
The failure of one or more fuses has been detected.
scalarEnumeration.1.3.6.1.4.1.2254.2.5.9.9
Notification Objects
ObjectTypeSyntaxOID
IT-WATCHDOGS-V4-MIBt3hdSensorExtBTemp
Current reading for External Temperature B in 0.1 degrees. Units are given by temperatureUnits field in deviceInfo
column0.1 Degrees Integer32.1.3.6.1.4.1.17373.4.1.8.1.14
IT-WATCHDOGS-V4-MIBtemperatureUnits
Current units for temperature values. 0 = Degrees Fahrenheit, 1 = Degrees Celsius
scalarInteger32.1.3.6.1.4.1.17373.4.1.1.7