dvbRcsInstallStandByDuration
DVB-RCS-MIB ·
.1.3.6.1.2.1.10.239.1.1.3.9
Object
Time to wait in stand-by mode (in seconds).
Context
- MIB
- DVB-RCS-MIB
- OID
.1.3.6.1.2.1.10.239.1.1.3.9- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- dvbRcsRcstInstall
- Siblings
- 9
Syntax
seconds SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dvbRcsInstallAntennaAlignmentState Indicates the alignment state of the antenna:
(1)-Start;
(2)-Deny;
(3)-Continue;
(4)-Stop;
(5)-Success;
(6)-Fail | scalar | Enumeration | .1.3.6.1.2.1.10.239.1.1.3.1 |
| dvbRcsInstallTargetEsN0 This value describes the wanted Es/N0 value that
enables operation of the return link with the required
error performance. The values shall be given in tenth of
dB and the initia… | scalar | x0.1 dB Unsigned32 | .1.3.6.1.2.1.10.239.1.1.3.10 |
| dvbRcsInstallCwFrequency Frequency of the transmitted Continuous Wave
carrier (in 100 Hz).
Minimum required precision is 1 kHz. | scalar | x100 Hz SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.239.1.1.3.2 |
| dvbRcsInstallCwMaxDuration Time after which the Continuous Wave carrier must be
put down (in seconds). | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.239.1.1.3.3 |
| dvbRcsInstallCwPower IDU TX output level when the IDU is configured to send
CW. The resolution is 0.1 dBm and the accuracy is +/- 1
dBm. Reconfiguration is applied immediately to a CW. | scalar | x0.1 dBm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.10.239.1.1.3.4 |
| dvbRcsInstallCoPolReading Co-polarization measured value during installation
procedure (in 0.1 dB). | scalar | x0.1 dB SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.239.1.1.3.5 |
| dvbRcsInstallXPolReading Cross-polarization measured value during installation
procedure (in 0.1 dB). | scalar | x0.1 dB SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.239.1.1.3.6 |
| dvbRcsInstallCoPolTarget Co-polarization target value during installation
procedure (in 0.1 dB). | scalar | x0.1 dB SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.239.1.1.3.7 |
| dvbRcsInstallXPolTarget Cross-polarization target value during installation
procedure (in 0.1 dB). | scalar | x0.1 dB SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.239.1.1.3.8 |