dvbRcsInstallAntennaAlignmentState

DVB-RCS-MIB · .1.3.6.1.2.1.10.239.1.1.3.1

MIB view Table view

Object

scalar r/w Enumeration

Indicates the alignment state of the antenna:
(1)-Start;
(2)-Deny;
(3)-Continue;
(4)-Stop;
(5)-Success;
(6)-Fail

Context

MIB: DVB-RCS-MIB
OID: .1.3.6.1.2.1.10.239.1.1.3.1
Type: scalar
Access: readwrite
Status: current
Parent: dvbRcsRcstInstall
Siblings: 9

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	antennaAlignmentStart
`2`	antennaAlignmentDeny
`3`	antennaAlignmentContinue
`4`	antennaAlignmentStop
`5`	antennaAlignmentSuccess
`6`	antennaAlignmentFail

Related Objects

Sibling Objects

Object	Type	Syntax	OID
dvbRcsInstallTargetEsN0 This value describes the wanted Es/N0 value that enables operation of the return link with the required error performance. The values shall be given in tenth of dB and the initia…	scalar	x0.1 dB Unsigned32	`.1.3.6.1.2.1.10.239.1.1.3.10`
dvbRcsInstallCwFrequency Frequency of the transmitted Continuous Wave carrier (in 100 Hz). Minimum required precision is 1 kHz.	scalar	x100 Hz SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.10.239.1.1.3.2`
dvbRcsInstallCwMaxDuration Time after which the Continuous Wave carrier must be put down (in seconds).	scalar	seconds SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.10.239.1.1.3.3`
dvbRcsInstallCwPower IDU TX output level when the IDU is configured to send CW. The resolution is 0.1 dBm and the accuracy is +/- 1 dBm. Reconfiguration is applied immediately to a CW.	scalar	x0.1 dBm SNMPv2-SMIInteger32	`.1.3.6.1.2.1.10.239.1.1.3.4`
dvbRcsInstallCoPolReading Co-polarization measured value during installation procedure (in 0.1 dB).	scalar	x0.1 dB SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.10.239.1.1.3.5`
dvbRcsInstallXPolReading Cross-polarization measured value during installation procedure (in 0.1 dB).	scalar	x0.1 dB SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.10.239.1.1.3.6`
dvbRcsInstallCoPolTarget Co-polarization target value during installation procedure (in 0.1 dB).	scalar	x0.1 dB SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.10.239.1.1.3.7`
dvbRcsInstallXPolTarget Cross-polarization target value during installation procedure (in 0.1 dB).	scalar	x0.1 dB SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.10.239.1.1.3.8`
dvbRcsInstallStandByDuration Time to wait in stand-by mode (in seconds).	scalar	seconds SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.10.239.1.1.3.9`