dpwAtmPerfIntervalPktsMisOrder
DPW-ATM-MIB ·
.0.1.1.8.1.6
Object
column
PerfHist-TC-MIBPerfIntervalCount
Number of packets detected out of order (via control word sequence numbers).
Context
- MIB
- DPW-ATM-MIB
- OID
.0.1.1.8.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- dpwAtmPerfIntervalEntry
- Table
- dpwAtmPerfIntervalTable
- Siblings
- 11
Syntax
PerfHist-TC-MIBPerfIntervalCount
- Source
- PerfHist-TC-MIBPerfIntervalCount
- Base type
Unsigned32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dpwAtmPerfIntervalNumber A number (normally between 1 and 96 to cover a 24 hour
period) which identifies the interval for which the set
of statistics is available. The interval identified by 1
is the most… | column | Unsigned32 | .0.1.1.8.1.1 |
| dpwAtmPerfIntervalCellsReceived Number of received cells. | column | PerfHist-TC-MIBPerfIntervalCount | .0.1.1.8.1.10 |
| dpwAtmPerfIntervalUnknownCells Number of cells received from the PSN with unknown VPI or
VCI values. This object is relevant only in N:1 mode. | column | PerfHist-TC-MIBPerfIntervalCount | .0.1.1.8.1.11 |
| dpwAtmPerfIntervalTime Timestamp value of the system in hours, minutes and seconds
when data is received for particular pseudo-wire for every
15-minutes | column | OctetString | .0.1.1.8.1.12 |
| dpwAtmPerfIntervalValidData This variable indicates if the data for this interval
is valid. | column | SNMPv2-TCTruthValue | .0.1.1.8.1.2 |
| dpwAtmPerfIntervalDuration The duration of a particular interval in seconds,
Adjustments in the system's time-of-day clock, may
cause the interval to be greater or less than, the
normal value. Therefore thi… | column | SNMPv2-SMIUnsigned32 | .0.1.1.8.1.3 |
| dpwAtmPerfIntervalMissingPkts Number of missing packets (as detected via control
word sequence number gaps). | column | PerfHist-TC-MIBPerfIntervalCount | .0.1.1.8.1.4 |
| dpwAtmPerfIntervalPktsReOrder Number of packets detected out of sequence (via control
word sequence number), but successfully re-ordered.
Note: some implementations may not support this
Feature. | column | PerfHist-TC-MIBPerfIntervalCount | .0.1.1.8.1.5 |
| dpwAtmPerfIntervalPktsTimeout Number of packets transmitted due to timeout expiration. | column | PerfHist-TC-MIBPerfIntervalCount | .0.1.1.8.1.7 |
| dpwAtmPerfIntervalCellsXmit Number of transmitted cells. | column | PerfHist-TC-MIBPerfIntervalCount | .0.1.1.8.1.8 |
| dpwAtmPerfIntervalCellsDropped Number of dropped cells. | column | PerfHist-TC-MIBPerfIntervalCount | .0.1.1.8.1.9 |