docsIfExt2CmMscStatusIUC2Control
DOCS-IFEXT2-MIB ·
.1.3.6.1.4.1.4491.2.1.5.1.2.1.1.7
Object
column
r/w
Enumeration
The CM usage of IUC2 when MSC is enabled:
noIUC2(1): CM usage of IUC2 is prohibited
limitedIUC2(2): CM is allowed to use IUC2 as long as
the CM does not exceed MSC
freeIUC2(3): CM is allowed to use IUC2 without regard
for MSC.
With limitedIUC2(2), there may be cases where a CM cannot
ensure that the use of IUC2 would not exceed MSC. In these
cases, the CM MUST NOT use IUC2.
Context
- MIB
- DOCS-IFEXT2-MIB
- OID
.1.3.6.1.4.1.4491.2.1.5.1.2.1.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- docsIfExt2CmMscStatusEntry
- Table
- docsIfExt2CmMscStatusTable
- Siblings
- 6
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | noIUC2 |
2 | limitedIUC2 |
3 | freeIUC2 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsIfExt2CmMscStatusState Indicates the current state of the Maximum Scheduled Codes
feature on the CM.
channelEnabled(1) S-CDMA Maximum Scheduled Codes
is enabled in the UCD TLV-17.
… | column | Enumeration | .1.3.6.1.4.1.4491.2.1.5.1.2.1.1.1 |
| docsIfExt2CmMscStatusPowerShortfall Indicates the Power Shortfall at the CM, in units of
tenth dB.
The value is provided by the CM and is sent in the RNG-REQ
message. It is internally calculated in units of quarter
… | column | TenthdB DOCS-IF-MIBTenthdB | .1.3.6.1.4.1.4491.2.1.5.1.2.1.1.2 |
| docsIfExt2CmMscStatusCodeRatio Indicates the maximum ratio of number of active codes to
Maximum Scheduled Codes that the CM can support, as
reported in the Ranging Request. | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.5.1.2.1.1.3 |
| docsIfExt2CmMscStatusMaximumScheduledCodes Indicates the Maximum Scheduled Codes in use by the CM.
The value is provided by the CMTS through a TLV value in
the RNG-RSP message. Note that not all values from 4..128
are vali… | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.5.1.2.1.1.4 |
| docsIfExt2CmMscStatusPowerHeadroom Indicates the Maximum Scheduled Codes Power Headroom in
use by the CM, in units of tenth dB. The value is
provided by the CMTS in units of quarter dB through
TLV-11 in the RNG-RSP… | column | TenthdB DOCS-IF-MIBTenthdB | .1.3.6.1.4.1.4491.2.1.5.1.2.1.1.5 |
| docsIfExt2CmMscStatusEffectivePower Indicates the Effective Transmit Power of the CM. This is
the power that would result hypothetically if, in a
spreader-on frame, the CM were to transmit on all active
codes with 6… | column | TenthdBmV DOCS-IF-MIBTenthdBmV | .1.3.6.1.4.1.4491.2.1.5.1.2.1.1.6 |