docsIfExt2CmMscStatusEffectivePower
DOCS-IFEXT2-MIB ·
.1.3.6.1.4.1.4491.2.1.5.1.2.1.1.6
Object
Indicates the Effective Transmit Power of the CM. This is the power that would result hypothetically if, in a spreader-on frame, the CM were to transmit on all active codes with 64QAM modulation. This object should be equal to docsIfCmStatusTxPower when docsIfExt2CmMscStatusState is not active(3).
Context
- MIB
- DOCS-IFEXT2-MIB
- OID
.1.3.6.1.4.1.4491.2.1.5.1.2.1.1.6- Type
- column
- Access
- readonly
- Status
- current
- Units
- TenthdBmV
- Parent
- docsIfExt2CmMscStatusEntry
- Table
- docsIfExt2CmMscStatusTable
- Siblings
- 6
Syntax
TenthdBmV DOCS-IF-MIBTenthdBmV
- Source
- DOCS-IF-MIBTenthdBmV
- Base type
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsIfExt2CmMscStatusState Indicates the current state of the Maximum Scheduled Codes
feature on the CM.
channelEnabled(1) S-CDMA Maximum Scheduled Codes
is enabled in the UCD TLV-17.
… | column | Enumeration | .1.3.6.1.4.1.4491.2.1.5.1.2.1.1.1 |
| docsIfExt2CmMscStatusPowerShortfall Indicates the Power Shortfall at the CM, in units of
tenth dB.
The value is provided by the CM and is sent in the RNG-REQ
message. It is internally calculated in units of quarter
… | column | TenthdB DOCS-IF-MIBTenthdB | .1.3.6.1.4.1.4491.2.1.5.1.2.1.1.2 |
| docsIfExt2CmMscStatusCodeRatio Indicates the maximum ratio of number of active codes to
Maximum Scheduled Codes that the CM can support, as
reported in the Ranging Request. | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.5.1.2.1.1.3 |
| docsIfExt2CmMscStatusMaximumScheduledCodes Indicates the Maximum Scheduled Codes in use by the CM.
The value is provided by the CMTS through a TLV value in
the RNG-RSP message. Note that not all values from 4..128
are vali… | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.5.1.2.1.1.4 |
| docsIfExt2CmMscStatusPowerHeadroom Indicates the Maximum Scheduled Codes Power Headroom in
use by the CM, in units of tenth dB. The value is
provided by the CMTS in units of quarter dB through
TLV-11 in the RNG-RSP… | column | TenthdB DOCS-IF-MIBTenthdB | .1.3.6.1.4.1.4491.2.1.5.1.2.1.1.5 |
| docsIfExt2CmMscStatusIUC2Control The CM usage of IUC2 when MSC is enabled:
noIUC2(1): CM usage of IUC2 is prohibited
limitedIUC2(2): CM is allowed to use IUC2 as long as
the CM does… | column | Enumeration | .1.3.6.1.4.1.4491.2.1.5.1.2.1.1.7 |