docsIf3MdChCfgTable
DOCS-IF3-MIB ·
.1.3.6.1.4.1.4491.2.1.20.1.5
Object
table
This object configures the association of downstream and upstream channels to a particular MAC Domain (MD) on a CMTS. The creation of channels and MAC domain object interface instances is vendor-specific. In particular, the assignment of the channel interface index is normally vendor-specific. Therefore, this object is intended only for associating channels to a MAC Domain and assumes that those channels were previously configured. The CMTS may have restrictions on which channels can be configured in the same MAC Domain. For example, it could require the upstream channels to be from the same line card. This object supports the creation and deletion of multiple instances. Creation of a new instance of this object requires the ChId attribute to be set.
Context
- MIB
- DOCS-IF3-MIB
- OID
.1.3.6.1.4.1.4491.2.1.20.1.5- Type
- table
- Status
- current
- Parent
- docsIf3MibObjects
- Siblings
- 36
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsIf3CmStatusTable This object defines attributes of the CM connectivity
status. This object provides CM connectivity status
information of the CM previously available in
the SNMP table docsIfCmStat… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.1 |
| docsIf3RxModuleCfgTable obsolete The Receive Module Configuration object permits
an operator to configure how CMs with certain Receive
Channel Profiles (RCPs) will configure the Receive
Modules within their profi… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.10 |
| docsIf3RxModuleStatusTable The Receive Module Status object provides a read-only
view of the statically configured and dynamically
created Receive Modules within an RCC. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.11 |
| docsIf3MdNodeStatusTable This object reports the MD-DS-SG-ID and MD-US-SG-ID
associated with a MD-CM-SG-ID within a MAC Domain
and the Fiber Nodes reached by the MD-CM-SG. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.12 |
| docsIf3MdDsSgStatusTable This object returns the list of downstream channel
associated with a MAC Domain MD-DS-SG-ID. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.13 |
| docsIf3MdUsSgStatusTable This object returns the list of upstream channels
associated with a MAC Domain MD-US-SG-ID. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.14 |
| docsIf3MdUsToDsChMappingTable This object returns the set of downstream channels
that carry UCDs and MAPs for a particular upstream channel
in a MAC Domain. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.15 |
| docsIf3MdCfgTable This object contains MAC domain level control and
configuration attributes. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.16 |
| docsIf3BondingGrpCfgTable This object defines statically configured Downstream
Bonding Groups and Upstream Bonding Groups on
the CMTS.
This object supports the creation and deletion of multiple
instances.
… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.17 |
| docsIf3DsBondingGrpStatusTable This object returns administratively-configured
and CMTS defined downstream bonding groups. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.18 |
| docsIf3UsBondingGrpStatusTable This object returns administratively-configured
and CMTS-defined upstream bonding groups. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.19 |
| docsIf3CmStatusUsTable This object defines PHY and MAC information about
the CM's upstream channels operating in Multiple Transmit
Channel (MTC) mode or in a Pre-3.0 DOSCIS transmit
channel mode. This o… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.2 |
| docsIf3UsChExtTable This object defines management extensions for upstream
channels, in particular SCDMA parameters. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.20 |
| docsIf3CmCapabilities | node | - | .1.3.6.1.4.1.4491.2.1.20.1.21 |
| docsIf3UsChSetTable This object defines a set of upstream channels. These
channel sets may be associated with channel bonding
groups, MD-US-SGs, MD-CM-SGs, or any other channel
set that the CMTS may … | table | - | .1.3.6.1.4.1.4491.2.1.20.1.22 |
| docsIf3DsChSetTable This object defines a set of downstream channels.
These channel sets may be associated with channel bonding
groups, MD-DS-SGs, MD-CM-SGs, or any other channel
set that the CMTS ma… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.23 |
| docsIf3SignalQualityExtTable This object provides an in-channel received modulation
error ratio metric for CM and CMTS. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.24 |
| docsIf3CmtsSignalQualityExtTable This object provides metrics and parameters associated
with received carrier, noise and interference
power levels in the upstream channels of the CMTS. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.25 |
| docsIf3CmtsSpectrumAnalysisMeasTable This object is used to configure the logical upstream
interfaces to perform the spectrum measurements.
This object supports creation and deletion of instances. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.26 |
| docsIf3CmtsCmCtrl | node | - | .1.3.6.1.4.1.4491.2.1.20.1.27 |
| docsIf3CmDpvStatsTable This object represents the DOCSIS Path Verify Statistics
collected in the cable modem device.
The CMTS controls the logging of DPV statistics in the
cable modem. Therefore the con… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.28 |
| docsIf3CmEventCtrlTable This object represents the control mechanism to enable the
dispatching of events based on the event Id. The following
rules define the event control behavior:
- The CmE… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.29 |
| docsIf3CmtsCmRegStatusTable This object defines attributes that represent the CM's
registration status as tracked by the CMTS.
Refer to the individual attribute definitions for
applicability to 3.0 and 3.1 C… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.3 |
| docsIf3CmtsEventCtrlTable This object represents the control mechanism to enable the
dispatching of events based on the event Id. The following
rules define the event control behavior:
- The Cm… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.30 |
| docsIf3CmMdCfgTable This object contains CM MAC domain level control and
configuration attributes. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.31 |
| docsIf3CmEnergyMgtCfg | node | - | .1.3.6.1.4.1.4491.2.1.20.1.32 |
| docsIf3CmEnergyMgt1x1CfgTable This object provides configuration state information
on the CM for the Energy Management 1x1 Mode feature. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.33 |
| docsIf3CmSpectrumAnalysisCtrlCmd | node | - | .1.3.6.1.4.1.4491.2.1.20.1.34 |
| docsIf3CmSpectrumAnalysisMeasTable This table provides a list of spectral analysis measurements
as performed across a range of center frequencies. The table
is capable of representing a full scan of the spectrum. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.35 |
| docsIf3CmtsCmEmStatsTable This table defines Energy Management mode statistics for the
CM as reported by the CMTS. For example, such metrics can
provide insight into configuration of appropriate EM 1x1 Mo… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.36 |
| docsIf3CmEm1x1StatsTable This object defines Energy Management 1x1 mode statistics on
the CM to provide insight into configuration of appropriate EM
1x1 Mode Activity Detection thresholds and/or to get fe… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.37 |
| docsIf3CmtsCmUsStatusTable This object defines status information of the CM
currently in use Upstream Logical Channels, as reported
by the CMTS. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.4 |
| docsIf3RccCfgTable obsolete This object identifies the scope of the Receive Channel
Configuration (RCC) and provides a top level container
for the Receive Module and Receive Channel
objects. The CMTS select… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.6 |
| docsIf3RccStatusTable The RCC Status object provides a read-only view of
the statically-configured (from the RccCfg object)
and dynamically-created RCCs.
The CMTS creates an RCC Status instance for eac… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.7 |
| docsIf3RxChCfgTable obsolete The Receive Channel Configuration object permits
an operator to configure how CMs registered with certain
Receive Channel Profiles will configure the Receive
Channels within their… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.8 |
| docsIf3RxChStatusTable The Receive Channel Status object reports the status
of the statically-configured and dynamically-created
Receive Channels within an RCC. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsIf3MdChCfgEntry The conceptual row of docsIf3MdChCfgTable.
The ifIndex key corresponds to the MAC Domain interface
where the channel is configured.
The CMTS persists all instances of MdChCfg acro… | row | - | .1.3.6.1.4.1.4491.2.1.20.1.5.1 |