docsIf3CmStatusUsTable
DOCS-IF3-MIB ·
.1.3.6.1.4.1.4491.2.1.20.1.2
Object
table
This object defines PHY and MAC information about the CM's upstream channels operating in Multiple Transmit Channel (MTC) mode or in a Pre-3.0 DOSCIS transmit channel mode. This object provides per-CM Upstream channel information previously available in the SNMP table docsIfCmStatusTable.
Context
- MIB
- DOCS-IF3-MIB
- OID
.1.3.6.1.4.1.4491.2.1.20.1.2- Type
- table
- Status
- current
- Parent
- docsIf3MibObjects
- Siblings
- 36
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsIf3CmStatusTable This object defines attributes of the CM connectivity
status. This object provides CM connectivity status
information of the CM previously available in
the SNMP table docsIfCmStat… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.1 |
| docsIf3RxModuleCfgTable obsolete The Receive Module Configuration object permits
an operator to configure how CMs with certain Receive
Channel Profiles (RCPs) will configure the Receive
Modules within their profi… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.10 |
| docsIf3RxModuleStatusTable The Receive Module Status object provides a read-only
view of the statically configured and dynamically
created Receive Modules within an RCC. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.11 |
| docsIf3MdNodeStatusTable This object reports the MD-DS-SG-ID and MD-US-SG-ID
associated with a MD-CM-SG-ID within a MAC Domain
and the Fiber Nodes reached by the MD-CM-SG. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.12 |
| docsIf3MdDsSgStatusTable This object returns the list of downstream channel
associated with a MAC Domain MD-DS-SG-ID. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.13 |
| docsIf3MdUsSgStatusTable This object returns the list of upstream channels
associated with a MAC Domain MD-US-SG-ID. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.14 |
| docsIf3MdUsToDsChMappingTable This object returns the set of downstream channels
that carry UCDs and MAPs for a particular upstream channel
in a MAC Domain. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.15 |
| docsIf3MdCfgTable This object contains MAC domain level control and
configuration attributes. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.16 |
| docsIf3BondingGrpCfgTable This object defines statically configured Downstream
Bonding Groups and Upstream Bonding Groups on
the CMTS.
This object supports the creation and deletion of multiple
instances.
… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.17 |
| docsIf3DsBondingGrpStatusTable This object returns administratively-configured
and CMTS defined downstream bonding groups. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.18 |
| docsIf3UsBondingGrpStatusTable This object returns administratively-configured
and CMTS-defined upstream bonding groups. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.19 |
| docsIf3UsChExtTable This object defines management extensions for upstream
channels, in particular SCDMA parameters. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.20 |
| docsIf3CmCapabilities | node | - | .1.3.6.1.4.1.4491.2.1.20.1.21 |
| docsIf3UsChSetTable This object defines a set of upstream channels. These
channel sets may be associated with channel bonding
groups, MD-US-SGs, MD-CM-SGs, or any other channel
set that the CMTS may … | table | - | .1.3.6.1.4.1.4491.2.1.20.1.22 |
| docsIf3DsChSetTable This object defines a set of downstream channels.
These channel sets may be associated with channel bonding
groups, MD-DS-SGs, MD-CM-SGs, or any other channel
set that the CMTS ma… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.23 |
| docsIf3SignalQualityExtTable This object provides an in-channel received modulation
error ratio metric for CM and CMTS. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.24 |
| docsIf3CmtsSignalQualityExtTable This object provides metrics and parameters associated
with received carrier, noise and interference
power levels in the upstream channels of the CMTS. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.25 |
| docsIf3CmtsSpectrumAnalysisMeasTable This object is used to configure the logical upstream
interfaces to perform the spectrum measurements.
This object supports creation and deletion of instances. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.26 |
| docsIf3CmtsCmCtrl | node | - | .1.3.6.1.4.1.4491.2.1.20.1.27 |
| docsIf3CmDpvStatsTable This object represents the DOCSIS Path Verify Statistics
collected in the cable modem device.
The CMTS controls the logging of DPV statistics in the
cable modem. Therefore the con… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.28 |
| docsIf3CmEventCtrlTable This object represents the control mechanism to enable the
dispatching of events based on the event Id. The following
rules define the event control behavior:
- The CmE… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.29 |
| docsIf3CmtsCmRegStatusTable This object defines attributes that represent the CM's
registration status as tracked by the CMTS.
Refer to the individual attribute definitions for
applicability to 3.0 and 3.1 C… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.3 |
| docsIf3CmtsEventCtrlTable This object represents the control mechanism to enable the
dispatching of events based on the event Id. The following
rules define the event control behavior:
- The Cm… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.30 |
| docsIf3CmMdCfgTable This object contains CM MAC domain level control and
configuration attributes. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.31 |
| docsIf3CmEnergyMgtCfg | node | - | .1.3.6.1.4.1.4491.2.1.20.1.32 |
| docsIf3CmEnergyMgt1x1CfgTable This object provides configuration state information
on the CM for the Energy Management 1x1 Mode feature. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.33 |
| docsIf3CmSpectrumAnalysisCtrlCmd | node | - | .1.3.6.1.4.1.4491.2.1.20.1.34 |
| docsIf3CmSpectrumAnalysisMeasTable This table provides a list of spectral analysis measurements
as performed across a range of center frequencies. The table
is capable of representing a full scan of the spectrum. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.35 |
| docsIf3CmtsCmEmStatsTable This table defines Energy Management mode statistics for the
CM as reported by the CMTS. For example, such metrics can
provide insight into configuration of appropriate EM 1x1 Mo… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.36 |
| docsIf3CmEm1x1StatsTable This object defines Energy Management 1x1 mode statistics on
the CM to provide insight into configuration of appropriate EM
1x1 Mode Activity Detection thresholds and/or to get fe… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.37 |
| docsIf3CmtsCmUsStatusTable This object defines status information of the CM
currently in use Upstream Logical Channels, as reported
by the CMTS. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.4 |
| docsIf3MdChCfgTable This object configures the association of downstream
and upstream channels to a particular MAC Domain
(MD) on a CMTS. The creation of channels and MAC domain
object interface ins… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.5 |
| docsIf3RccCfgTable obsolete This object identifies the scope of the Receive Channel
Configuration (RCC) and provides a top level container
for the Receive Module and Receive Channel
objects. The CMTS select… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.6 |
| docsIf3RccStatusTable The RCC Status object provides a read-only view of
the statically-configured (from the RccCfg object)
and dynamically-created RCCs.
The CMTS creates an RCC Status instance for eac… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.7 |
| docsIf3RxChCfgTable obsolete The Receive Channel Configuration object permits
an operator to configure how CMs registered with certain
Receive Channel Profiles will configure the Receive
Channels within their… | table | - | .1.3.6.1.4.1.4491.2.1.20.1.8 |
| docsIf3RxChStatusTable The Receive Channel Status object reports the status
of the statically-configured and dynamically-created
Receive Channels within an RCC. | table | - | .1.3.6.1.4.1.4491.2.1.20.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsIf3CmStatusUsEntry The conceptual row of docsIf3CmStatusUsTable.
An instance exist for each of the CM's SC-QAM upstream channels
which are configured for data transmission. | row | - | .1.3.6.1.4.1.4491.2.1.20.1.2.1 |