docsIf3CmSpectrumAnalysisCtrlCmdInactivityTimeout
DOCS-IF3-MIB ·
.1.3.6.1.4.1.4491.2.1.20.1.34.2
Object
scalar
r/w
seconds Integer32
This attribute controls the length of time after the last spectrum analysis measurement before the feature is automatically disabled. If set to a value of 0, the feature will remain enabled until it is explicitly disabled.
Context
- MIB
- DOCS-IF3-MIB
- OID
.1.3.6.1.4.1.4491.2.1.20.1.34.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- docsIf3CmSpectrumAnalysisCtrlCmd
- Siblings
- 8
Syntax
seconds Integer32
Values & Constraints
Object Constraints
range: 0-86400
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsIf3CmSpectrumAnalysisCtrlCmdEnable This attribute is used to enable or disable the spectrum
analyzer feature. Setting this attribute to true triggers the CM
to initiate measurements for the spectrum analyzer featur… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4491.2.1.20.1.34.1 |
| docsIf3CmSpectrumAnalysisCtrlCmdFirstSegmentCenterFrequency This attribute controls the center frequency of the
first segment for the spectrum analysis measurement.
The frequency bins for this segment lie symmetrically
to the left and righ… | scalar | Hz SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.1.20.1.34.3 |
| docsIf3CmSpectrumAnalysisCtrlCmdLastSegmentCenterFrequency This attribute controls the center frequency of
the last segment of the spectrum analysis measurement.
The frequency bins for this segment lie symmetrically
to the left… | scalar | Hz SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.1.20.1.34.4 |
| docsIf3CmSpectrumAnalysisCtrlCmdSegmentFrequencySpan This attribute controls the frequency span of each
segment (instance) in the docsIf3CmSpectrumAnalysisMeasTable.
If set to a value of 0, then a default span will be
cho… | scalar | Hz Unsigned32 | .1.3.6.1.4.1.4491.2.1.20.1.34.5 |
| docsIf3CmSpectrumAnalysisCtrlCmdNumBinsPerSegment This attribute controls the number of bins collected
by the measurement performed for each segment (instance)
in the docsIf3CmSpectrumAnalysisMeasTable.
Note that if th… | scalar | bins-per-segment Unsigned32 | .1.3.6.1.4.1.4491.2.1.20.1.34.6 |
| docsIf3CmSpectrumAnalysisCtrlCmdEquivalentNoiseBandwidth This attribute allows the user to request an equivalent
noise bandwidth for the resolution bandwidth filter used
in the spectrum analysis. This corresponds to the
spectral width … | scalar | hundredthsbin Unsigned32 | .1.3.6.1.4.1.4491.2.1.20.1.34.7 |
| docsIf3CmSpectrumAnalysisCtrlCmdWindowFunction This attribute controls or indicates the windowing function
which will be used when performing the discrete Fourier
transform for the analysis. The WindowFunction and the
Equival… | scalar | SpectrumAnalysisWindowFunction | .1.3.6.1.4.1.4491.2.1.20.1.34.8 |
| docsIf3CmSpectrumAnalysisCtrlCmdNumberOfAverages This attribute controls the number of averages
that will be performed on spectral bins.
The average will be computed using the 'leaky integrator'
method, where:
reported bin val… | scalar | Unsigned32 | .1.3.6.1.4.1.4491.2.1.20.1.34.9 |