docsIfMCmtsDepiSessionConfigRowStatus

DOCS-IF-M-CMTS-MIB · .1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.26

Object

column r/w SNMPv2-TCRowStatus

The status of this conceptual table row entry.
In order to set an entry to the 'active' status,
the MIB objects below must be set to proper values:
Other objects default values are used for the DEPI session
              
docsIfMCmtsDepiSessionConfigCableMacIfIndex
docsIfMCmtsDepiSessionConfigRemoteAddr
docsIfMCmtsDepiSessionConfigTSID      
docsIfMCmtsDepiSessionConfigDEPIMode  
docsIfMCmtsDepiSessionConfigRsrcAllocReq
docsIfMCmtsDepiSessionConfigMethod
docsIfMCmtsDepiSessionConfigPhyFlag    
              
docsIfMCmtsDepiSessionConfigChannelId must be unique within
the MAC sublayer domain in order to set this entry to
active,
              
PHY parameters listed below are not required to be 
populated in this table, then default values are used to 
populate the entry or implementation may opt to not 
instantiate those objects.
              
docsIfMCmtsDepiSessionConfigChannelFrequency
docsIfMCmtsDepiSessionConfigChannelModulation
docsIfMCmtsDepiSessionConfigChannelInterleave
docsIfMCmtsDepiSessionConfigChannelPower
docsIfMCmtsDepiSessionConfigChannelAnnex
docsIfMCmtsDepiSessionConfigSyncInterval
              
When the row entry is 'active' the DEPI tunnel control
and/or the DEPI session is established. Retries and 
timeouts are proper of the DEPI Tunnel protocol used.
              
For L2TPv3 while the entry is active the M-CMTS must 
continue to set the DEPI session and log the respective 
errors for unsuccessful operations.
              
Relationship with the IfTable ifAdminStatus
              
Setting ifAdminStatus from ifTable to the interface pointed
by this entry 
(docsIfMCmtsDepiSessionConfigCableMCmtsDownIfIndex) to 
'down' sets this entry Row Status to 'notInService'. A set
to ifAdminStatus to 'up' while in 'down' state sets back 
the Row Status to 'active'. 
              
The opposite is not true: a set to this object to 'active' 
when previously 'notInService' and while ifAdmiStatus is 
'down' returns an error 'inconsistentValue', such only one 
point of contact is needed to enable and disable the 
interface.
              
Setting this object to 'notInService' while ifAdminStatus is
'down' sets ifOperStatus to 'down'. 
              
Setting this entry to 'notInService' will tear down the 
DEPI session. DEPI Tunnel Control teardown in the absence
of sessions is Tunnel protocol dependent, e.g., for L2TPv3 
Control Connections may use tunnel Idle Timeout objects 
defined in L2TP-MIB.
              
Due to the dependencies of IfAdminStatus and this table row
Status, M-CMTS Core and EQAM devices MUST not age out 
entries with Row Status 'notInService' and 
docsIfMCmtsDepiSessionInfoState in 
'ifAdmiStatusSetToDown'.

Context

MIB: DOCS-IF-M-CMTS-MIB
OID: .1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.26
Type: column
Access: readwrite
Status: current
Parent: docsIfMCmtsDepiSessionConfigEntry
Table: docsIfMCmtsDepiSessionConfigTable
Siblings: 26

Syntax

SNMPv2-TCRowStatus

Source: SNMPv2-TCRowStatus
Base type: Enumeration

Values & Constraints

Type Values

`1`	active
`2`	notInService
`3`	notReady
`4`	createAndGo
`5`	createAndWait
`6`	destroy

Related Objects

Sibling Objects

Object	Type	Syntax	OID
docsIfMCmtsDepiSessionConfigIndex The index for entries in this conceptual table.	column	Unsigned32	`.1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.1`
docsIfMCmtsDepiSessionConfigDEPIMode The DEPI mode of operation of this entry 'dmpt' indicates DOCSIS MPT mode (D-MPT) 'psp' indicates Packet Streaming Protocol.	column	Enumeration	`.1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.10`
docsIfMCmtsDepiSessionConfigRsrcAllocReq A reference to docsIfMCmtsDepiRsrcAllocIndex of docsIfMCmtsDepiRsrcAllocTable used in the DEPI Session setup by the M-CMTS Core to configure EQAM PHBIDs. M-CMTS uses only the PHBI…	column	Unsigned32	`.1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.11`
docsIfMCmtsDepiSessionConfigCinPhbIdPolicy A list of tags to reference CIN PHB policies in docsIfMCmtsDepiPhbPolicyTable for this DEPI session. This object is not meaningful for the EQAM, and reports a zero …	column	SNMP-TARGET-MIBSnmpTagValue	`.1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.12`
docsIfMCmtsDepiSessionConfigSyncEnabled Indicates the DOCSIS Sync message handling at the Edge QAM based upon PSP or DMPT mode of operation. In MPT mode 'true' indicates the EQAM MUST perform Sync TimeStamp correction.…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.13`
docsIfMCmtsDepiSessionConfigSyncInterval Indicates the time nominal time interval for EQAM to insert DOCSIS Sync messages when operating in PSP mode. In DMPT mode this value is ignored. The unit reference of this object …	column	docsisSyncSteps Unsigned32	`.1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.14`
docsIfMCmtsDepiSessionConfigPhyParamsFlag When configuring an entry, DOCSIS PHY parameters may be set directly or default values are used to populate the entry. This object indicates which PHY parameter sets need to be s…	column	Bits	`.1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.15`
docsIfMCmtsDepiSessionConfigChannelFrequency The channel frequency for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding ifIndex entry of docsIfChannelFrequency with this entry…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.16`
docsIfMCmtsDepiSessionConfigChannelModulation The channel modulation for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding ifIndex entry of docsIfDownChannelModulation with this …	column	Enumeration	`.1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.17`
docsIfMCmtsDepiSessionConfigChannelInterleave The channel Interleaver for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding ifIndex entry of docsIfDownChannelInterleave with this…	column	Enumeration	`.1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.18`
docsIfMCmtsDepiSessionConfigChannelPower The channel power level for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding ifIndex entry of docsIfDownChannelPower with this ent…	column	DOCS-IF-MIBTenthdBmV	`.1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.19`
docsIfMCmtsDepiSessionConfigCableMacIfIndex Defines the MAC domain (ifType docsCableMaclayer)on which the DEPI Session is being set for an existing M-CMTS Downstream interface. This object MUST be set to a v…	column	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.2`
docsIfMCmtsDepiSessionConfigChannelAnnex The channel J.83 Annex type for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding ifIndex entry of docsIfDownChannelAnnex with this…	column	Enumeration	`.1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.20`
docsIfMCmtsDepiSessionConfigChannelSymbolRateM The value M for the estimation of the DS Symbol Rate as (10.24 MHz )*M/N	column	Unsigned32	`.1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.21`
docsIfMCmtsDepiSessionConfigChannelSymbolRateN The value N for the estimation of the DS Symbol Rate as (10.24 MHz )*M/N	column	Unsigned32	`.1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.22`
docsIfMCmtsDepiSessionConfigChannelOutputRate The percentage of the maximum output rate for the aggregated traffic that is being sent though this M-CMTS Downstream interface to the QAM channel associated with this DEPI sess…	column	Unsigned32	`.1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.23`
docsIfMCmtsDepiSessionConfigChannelBurstSize The maximum burst size for the aggregate output rate of this M-CMTS Downstream Interface. The default value of this object corresponds to 3 M-CMTS Core payload MTUs. This value h…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.24`
docsIfMCmtsDepiSessionConfigStorage The storage realization of the entry. No columnar values can be changed if the StorageType of an entry is 'permanent'.	column	SNMPv2-TCStorageType	`.1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.25`
docsIfMCmtsDepiSessionConfigChannelId The downstream channel identification of this M-CMTS Downstream interface. During entry creation The M-CMTS Core assigns a Channel ID if this object is not provided. When this ob…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.27`
docsIfMCmtsDepiSessionConfigCableMCmtsDownIfIndex Defines the Downstream channel index on which the DEPI Session is being set. The set of this object is optional. When this object is not specified the M-CMTS is ex…	column	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.3`
docsIfMCmtsDepiSessionConfigAddrType The type of InetAddress for docsIfMCmtsDepiSessionConfigLocalAddr and docsIfMCmtsDepiSessionConfigRemoteAddr.	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.4`
docsIfMCmtsDepiSessionConfigLocalAddr The InetAddress of the local entity the DEPI Session is set.	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.5`
docsIfMCmtsDepiSessionConfigRemoteAddr The InetAddress of the remote peer the DEPI Session is set.	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.6`
docsIfMCmtsDepiSessionConfigL2TPv3HeaderType Indicates the type of L2TPv3 header being configured for the DEPI session. The value 'ip' means L2TPv3 Header Over IP The value 'udp' means L2TPv3 Header Over UDP. A M-CMTS Core i…	column	Enumeration	`.1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.7`
docsIfMCmtsDepiSessionConfigMethod Indicates the DEPI Tunnel mechanism used for the DEPI session. Currently only 'l2tpControl is supported. The value 'other' is used to indicate other means.	column	Enumeration	`.1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.8`
docsIfMCmtsDepiSessionConfigTSID The TSID to be associated to the DEPI Session. TSID is a 16-bit unsigned integer value configured per QAM channel in the EQAM device and serves as a QAM channel identifier at sev…	column	Unsigned32	`.1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.9`