trapCesopTdmRemoteStatus
DMswitch-MIB ·
.1.3.6.1.4.1.3709.3.5.201.1.14.2.24
Object
scalar
Enumeration
This variable is for trap var binding, indicating the status of remote TDM interface.
Context
- MIB
- DMswitch-MIB
- OID
.1.3.6.1.4.1.3709.3.5.201.1.14.2.24- Type
- scalar
- Access
- notifyonly
- Status
- current
- Parent
- trapVar
- Siblings
- 61
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | ok |
5 | ralm |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| trapForbiddenAccessMode This variable is for trap var binding,
indicated the ipfilter reject mode.
web(1),
snmp(2),
telnet(3),
ssh(4). | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.1 |
| trapEapsDomainName This variable is for trap var binding,
indicating the eaps domain name. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3709.3.5.201.1.14.2.10 |
| trapEapsDomainId This variable is for trap var binding,
indicating the eaps domain identifier. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3709.3.5.201.1.14.2.11 |
| trapEapsStatus This variable is for trap var binding,
indicating the eaps status.
idle(0),
complete(1),
failed(2),
links-up(3),
links-down(4),
pre-forwarding(5). | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.12 |
| trapTemperature This variable is for trap var binding,
indicating the temperature in degrees Celsius. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3709.3.5.201.1.14.2.13 |
| trapFuseId This variable is for trap var binding,
indicating the fuse indentifier. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3709.3.5.201.1.14.2.14 |
| trapFuseStatus This variable is for trap var binding,
indicating the fuse status.
normal(1),
failed(2). | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.15 |
| trapFansBoardPresenceStatus This variable is for trap var binding,
indicating the presence status of the fans board. | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.16 |
| trapStandbyMpuPresenceStatus This variable is for trap var binding,
indicating the presence status of the standby MPU. | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.17 |
| trapMacAddressMove This variable is for trap var binding,
indicating the MAC address of the device that has moved. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.3709.3.5.201.1.14.2.18 |
| trapMemFree This variable is for trap var binding,
indicating the total memory free(in Kbytes). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3709.3.5.201.1.14.2.19 |
| trapForbiddenAccessIp This variable is for trap var binding,
indicating the IP address that rejected by the ipfilter. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3709.3.5.201.1.14.2.2 |
| trapBootloaderNew This variable is for trap var binding,
indicating the installed bootloader version. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3709.3.5.201.1.14.2.20 |
| trapDevNo This variable is for trap var binding,
indicating the Dev no of equipment. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3709.3.5.201.1.14.2.21 |
| trapDevLocalId This variable is for trap var binding,
indicating the Serial number of remote equipment. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3709.3.5.201.1.14.2.22 |
| trapCesopTdmStatus This variable is for trap var binding,
indicating the status of TDM interface. | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.23 |
| trapCesopTdmCasStatus This variable is for trap var binding,
indicating the status of CAS TDM interface. | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.25 |
| trapCesopTdmCrcStatus This variable is for trap var binding,
indicating the status of CRC TDM interface. | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.26 |
| trapCesopBundleLocalTdmStatus This variable is for trap var binding,
indicating the status of Local TDM in bundle interface. | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.27 |
| trapCesopBundleRemoteTdmStatus This variable is for trap var binding,
indicating the status of Remote TDM in bundle interface. | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.28 |
| trapCesopBundleLocalStatus This variable is for trap var binding,
indicating the status of Local bundle interface. | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.29 |
| trapLoginUserName This variable is for trap var binding,
indicating the name used by user to logging. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3709.3.5.201.1.14.2.3 |
| trapCesopBundleRemoteStatus This variable is for trap var binding,
indicating the status of Remote bundle interface. | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.30 |
| trapCesopBundlePktMismatchStatus This variable is for trap var binding,
indicating the status of packet mismatch in bundle interface. | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.31 |
| trapCesopBundleNextHopStatus This variable is for trap var binding,
indicating the status of Next Hop in bundle interface. | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.32 |
| trapCesopClockAdapLinkQuality This variable is for trap var binding,
indicating the Adaptative link quality of clock interface. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3709.3.5.201.1.14.2.33 |
| trapCesopClockSourceStatus This variable is for trap var binding,
indicating the status of Clock Source interface. | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.34 |
| trapBroadcastStormControlStatus This variable is for trap var binding,
indicating the status of broadcsat storm control at this
interface. | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.35 |
| trapBroadcastStormControlPPS This variable is for trap var binding, indicating the current average count of
broadcast packets per second at this interface. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3709.3.5.201.1.14.2.36 |
| trapMulticastStormControlStatus This variable is for trap var binding,
indicating the status of multicsat storm control at this
interface. | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.37 |
| trapMulticastStormControlPPS This variable is for trap var binding,
indicating the current average count of multicast packets per second at this interface. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3709.3.5.201.1.14.2.38 |
| trapStatusLDP This variable is for trap var binding,
indicating the status of condition the protocol LDP. | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.39 |
| trapConfigSavePartition This variable is for trap var binding,
indicating the partition witch the config was saved. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3709.3.5.201.1.14.2.4 |
| trapIdLDP This variable is for trap var binding,
indicating the entity identification the protocol LDP. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3709.3.5.201.1.14.2.40 |
| trapStatusTunnelRSVP This variable is for trap var binding,
indicating the status of condition tunnel on protocol RSVP. | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.41 |
| trapIdTunnelRSVP This variable is for trap var binding,
indicating the entity identification the tunnel on protocol RSVP. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3709.3.5.201.1.14.2.42 |
| trapPanelStatus This variable is for trap var binding,
indicating the panel status.
closed(1),
open(2) | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.43 |
| trapLSTGroup This variable is for trap var binding,
indicating the Link-state Tracking Group. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3709.3.5.201.1.14.2.44 |
| trapMemL3Free This variable is for trap var binding,
indicating the total L3 memory free(in Kbytes). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3709.3.5.201.1.14.2.45 |
| trapActiveMpuNsfId This variable is for trap var binding,
indicating the active mpu nsf-id. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3709.3.5.201.1.14.2.46 |
| trapStandByMpuNsfId This variable is for trap var binding,
indicating the standby mpu nsf-id. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3709.3.5.201.1.14.2.47 |
| trapErpsDomainName This variable is for trap var binding,
indicating the erps domain name. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3709.3.5.201.1.14.2.48 |
| trapErpsDomainId This variable is for trap var binding,
indicating the erps domain identifier. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3709.3.5.201.1.14.2.49 |
| trapSfpPresenceStatus This variable is for trap var binding,
indicating the presence status of a sfp connector. | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.5 |
| trapErpsStatus This variable is for trap var binding,
indicating the erps status.
init(1),
idle(2),
protection(3). | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.50 |
| trapCfmMdName This variable is for trap var binding,
indicating the Maintenance Domain (MD) name that originated
the trap. | scalar | OctetString | .1.3.6.1.4.1.3709.3.5.201.1.14.2.51 |
| trapCfmMaName This variable is for trap var binding,
indicating the Maintenance Association (MA) name that originated
the trap. | scalar | OctetString | .1.3.6.1.4.1.3709.3.5.201.1.14.2.52 |
| trapCfmMepId This variable is for trap var binding,
indicating the Maintenance End Point ID (MEPID) that
originated the trap. | scalar | Integer32 | .1.3.6.1.4.1.3709.3.5.201.1.14.2.53 |
| trapCfmVlan This variable is for trap var binding,
indicating the VLAN that originated the trap. | scalar | Integer32 | .1.3.6.1.4.1.3709.3.5.201.1.14.2.54 |
| trapCfmDefect This variable is for trap var binding,
indicating the defect condition being notified .
defNone(0),
defRDICCM(1),
defMACstatus(2),
defRemoteCCM(3),
defErrorCCM(4),
… | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.55 |
| trapEvcName This variable is for trap var binding,
indicating the EVC name. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3709.3.5.201.1.14.2.56 |
| trapEvcStatus This variable is for trap var binding,
indicating the status of EVC being notified,
notActive(0),
newAndNotActive(1),
active(2),
newAndActive(3),
partiallyActive(4)… | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.57 |
| trapSyncSystemClockStatus This variable is for trap var binding,
indicating the status of system clock | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.58 |
| trapCesopG704ClockSourceStatus This variable is for trap var binding,
indicating the status of g704 clock source. | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.59 |
| trapInfAlarmVal This variable is for trap var binding,
indicating the alarm value.
deactivated(1),
actived(2),
unstable(3). | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.6 |
| trapSystemWarningsUnits This variable is for trap var binding,
indicating the system warnings units. | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.60 |
| trapSensorGroup This variable indicates the sensor's type informed in notification. | scalar | Enumeration | .1.3.6.1.4.1.3709.3.5.201.1.14.2.61 |
| trapIpNeighborLDP The IP address of the LDP neighbor. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.3709.3.5.201.1.14.2.62 |
| trapDuplicatedIpVlan This variable is for trap var binding,
indicating the vlan witch the duplicated ip was detected. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3709.3.5.201.1.14.2.7 |
| trapDuplicatedIpAddress This variable is for trap var binding,
indicating the duplicated ip address. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3709.3.5.201.1.14.2.8 |
| trapDuplicatedIpMacAddress This variable is for trap var binding,
indicating the mac address of the device that has the duplicated ip. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.3709.3.5.201.1.14.2.9 |