DMswitch-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
41
Rows
41
Columns
167
switchInfoTable
table.1.3.6.1.4.1.3709.3.5.201.1.1.2
·
1 row entry
·
19 columns
Table of descriptive and status information about switches in this system.
An entry in the table, containing information
about a single switch in this system.
about a single switch in this system.
Indexes
swUnitIndex
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
swUnitIndex
This object identifies the switch within the system
for which this entry contains information. This value can never be greater than switchNumber. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
swHardwareVer
Hardware version of the main board.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
swBootLoaderVer
Loader version of the main board.
|
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
swFirmwareVer
Operation code version of the main board.
|
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
swPortNumber
The total port number of this switch
(including expansion slot). |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
swPowerStatus
Indicates the switch using internalPower(1),
redundantPower(2), internalAndRedundantPower(3) or externalPower(4) |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
swRoleInSystem
Indicates the switch is master(1), backupMaster(2)
or slave(3) in this system. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
swSerialNumber
Serial number of the switch.
|
OctetString Constraints: range: 0-80 |
.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| swProdName | OctetString Constraints: range: 0-127 |
.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
swProdModelId
Product model identifier.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
swFirmwareReleaseDate
Release date of the firmware.
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
swTemperature
Temperature of the switch.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.12 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
swG704IntfNumber
The number of G704 interfaces of this switch.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.13 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
swE1cIntfNumber
The number of E1c interfaces of this switch.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.14 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
swBundleIntfNumber
The number of Bundle interfaces of this switch.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.15 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
swPtpIntfNumber
The number of PTP interfaces of this switch.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.16 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
swSdhIntfNumber
The number of SDH interfaces of this switch.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.17 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
swVC4Number
The number of VC4 interfaces of this switch.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.18 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
swVC12Number
The number of VC12 interfaces of this switch.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.1.2.1.19 |
switchIndivPowerTable
table.1.3.6.1.4.1.3709.3.5.201.1.1.4
·
1 row entry
·
3 columns
Table about status of individual powers.
Table about status of individual powers.
Indexes
swIndivPowerUnitIndex swIndivPowerIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
swIndivPowerUnitIndex
This is defined as swUnitIndex.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.1.4.1.1 |
||||||
|
swIndivPowerIndex
1 means internal power. 2 means external power.
|
Integer32 Constraints: range: 1-2 |
.1.3.6.1.4.1.3709.3.5.201.1.1.4.1.2 |
||||||
|
swIndivPowerStatus
notPresent(3) means not present. green(2) means
up. red(1) means down. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.1.4.1.3 |
switchIndivFanTable
table.1.3.6.1.4.1.3709.3.5.201.1.1.5
·
1 row entry
·
3 columns
Table about status of individual fans.
Table about status of individual fans.
Indexes
swIndivFanUnitIndex swIndivFanIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
swIndivFanUnitIndex
This is defined as swUnitIndex.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.1.5.1.1 |
||||
| swIndivFanIndex | Integer32 Constraints: range: 1-2 |
.1.3.6.1.4.1.3709.3.5.201.1.1.5.1.2 |
||||
|
swIndivFanStatus
red(1) means down. green(2) means
up. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.1.5.1.3 |
switchIndivAlarmTable
table.1.3.6.1.4.1.3709.3.5.201.1.1.6
·
1 row entry
·
3 columns
Table about status of individual alarms.
Table about status of individual alarms.
Indexes
swIndivAlarmUnitIndex swIndivAlarmIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
swIndivAlarmUnitIndex
This is defined as swUnitIndex.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.1.6.1.1 |
||||
| swIndivAlarmIndex | Integer32 Constraints: range: 1-3 |
.1.3.6.1.4.1.3709.3.5.201.1.1.6.1.2 |
||||
| swIndivAlarmStatus | Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.1.6.1.3 |
switchMacAddrUsageTable
table.1.3.6.1.4.1.3709.3.5.201.1.1.12
·
1 row entry
·
2 columns
Table about the total of used MAC addresses entries.
Table about the total of used MAC addresses entries.
Indexes
swMacAddrUnitIndex
| Column | Syntax | OID |
|---|---|---|
|
swMacAddrUnitIndex
This is defined as swUnitIndex.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.1.12.1.1 |
|
swMacAddrUsageValue
The total of used MAC addresses entries.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.1.12.1.2 |
switchMpuTable
table.1.3.6.1.4.1.3709.3.5.201.1.1.14
·
1 row entry
·
5 columns
Table of descriptive and status information about MPUs in this system.
An entry in the table, containing information
about a single MPU in this system.
about a single MPU in this system.
Indexes
swMpuIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
swMpuIndex
This object identifies the MPU within the system
for which this entry contains information. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.1.14.1.1 |
||||
|
swMpuBootLoaderVer
Loader version of the main board.
|
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.3709.3.5.201.1.1.14.1.2 |
||||
|
swMpuRoleInSystem
Indicates the MPU is active(1) or standby(2) in this system.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.1.14.1.3 |
||||
|
swMpuSerialNumber
Serial number of the MPU.
|
OctetString Constraints: range: 0-80 |
.1.3.6.1.4.1.3709.3.5.201.1.1.14.1.4 |
||||
|
swMpuModelId
MPU model identifier.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.1.14.1.5 |
switchIndivAlarmOutTable
table.1.3.6.1.4.1.3709.3.5.201.1.1.16
·
1 row entry
·
2 columns
Table about status of output alarms.
Table about status of output alarms.
Indexes
swIndivAlarmOutUnitIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
swIndivAlarmOutUnitIndex
This is defined as swUnitIndex.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.1.16.1.1 |
||||
|
swIndivAlarmOutStatus
Indicates current alarm output status, as configured in external-alarm-output.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.1.16.1.2 |
switchSessionTable
table.1.3.6.1.4.1.3709.3.5.201.1.1.18
·
1 row entry
·
5 columns
Table about CLI sessions informations.
An entry in the table, containing information
about a single switch in this system.
about a single switch in this system.
Indexes
swSessionUnitIndex
| Column | Syntax | OID |
|---|---|---|
|
swSessionUnitIndex
This is defined as swUnitIndex.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.1.18.1.1 |
|
swSessionName
Session username.
|
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.3709.3.5.201.1.1.18.1.2 |
|
swSessionUptime
Login time and date (uptime).
|
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.3709.3.5.201.1.1.18.1.3 |
|
swSessionPid
CLI Session Process ID.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.1.18.1.4 |
|
swSessionSrcIP
IP from process that called CLI - telnet, ssh or inetd.
|
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.3709.3.5.201.1.1.18.1.5 |
portTable
table.1.3.6.1.4.1.3709.3.5.201.1.2.1
·
1 row entry
·
11 columns
Table of descriptive and status information about configuration of each switch port (including expansion slot) in this system. This table also contains information about each trunk (similar to Cisco's EtherChannel).
An entry in the table, containing information
about configuration in one switch port of the switch.
about configuration in one switch port of the switch.
Indexes
portIndex
| Column | Syntax | OID | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
portIndex
This is defined as ifIndex in the IF-MIB.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.2.1.1.1 |
||||||||||||||||||||||||
|
portName
Indicates the port name. This is same as
ifAlias in the IF-MIB (RFC2863 or later). |
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.3709.3.5.201.1.2.1.1.2 |
||||||||||||||||||||||||
|
portType
Indicates the port type.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.2.1.1.3 |
||||||||||||||||||||||||
|
portSpeedDpxCfg
Set the port speed and duplex mode as follows:
halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode halfDuplex100(4) - 100Mbps and half duplex mode fullDuplex100(5) - 100… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.2.1.1.4 |
||||||||||||||||||||||||
|
portFlowCtrlCfg
(1) Flow control mechanism is enabled.
If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.2.1.1.5 |
||||||||||||||||||||||||
|
portCapabilities
Port capabilities.
|
Bitsr/w Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.2.1.1.6 |
||||||||||||||||||||||||
|
portAutonegotiation
Whether autonegotiation is enabled.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.2.1.1.7 |
||||||||||||||||||||||||
|
portSpeedDpxStatus
The operating speed and duplex mode of the
switched port. If this index is a trunk, the speed is the speed of its individual members. If this index is a trunk and the result is inconsistent among its member ports, this … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.2.1.1.8 |
||||||||||||||||||||||||
|
portFlowCtrlStatus
(2) BackPressure flow control machanism is used.
(3) IEEE 802.3 flow control machanism is used. (4) Flow control mechanism is disabled. If this index is a trunk and the result is inconsistent among its member ports, thi… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.2.1.1.9 |
||||||||||||||||||||||||
| portMdiStatus | Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.2.1.1.10 |
||||||||||||||||||||||||
|
portTrunkIndex
The trunk to which this port belongs. A value of 0
means that this port does not belong to any trunk. A value greater than zero means that this port belongs to trunk at trunkIndex, defined by the corresponding trunkPort… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.2.1.1.11 |
trunkTable
table.1.3.6.1.4.1.3709.3.5.201.1.3.3
·
1 row entry
·
4 columns
Table of descriptive and status information about configuration of each trunk, similar to Cisco EtherChannel.
An entry in the table, containing information
about configuration in one trunk of the switch.
about configuration in one trunk of the switch.
Indexes
trunkIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
trunkIndex
This object identifies the trunk within the switch
for which this entry contains information. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.3.3.1.1 |
||||
|
trunkPorts
The complete set of ports currently associated with
this trunk. |
Q-BRIDGE-MIBPortListr/w Textual Convention: Q-BRIDGE-MIBPortList OctetString |
.1.3.6.1.4.1.3709.3.5.201.1.3.3.1.2 |
||||
|
trunkCreation
A value of static(1) means a statically configured trunk.
A value of lacp(2) means an LACP-configured trunk. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.3.3.1.3 |
||||
|
trunkStatus
Writing this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.3.3.1.4 |
lacpPortTable
table.1.3.6.1.4.1.3709.3.5.201.1.4.1
·
1 row entry
·
2 columns
Table for LACP port configuration.
Entry for LACP port configuration.
Indexes
lacpPortIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
lacpPortIndex
This is defined as ifIndex in the IF-MIB.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.4.1.1.1 |
||||
|
lacpPortStatus
Whether 802.3ad LACP is enabled.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.4.1.1.2 |
staPortTable
table.1.3.6.1.4.1.3709.3.5.201.1.5.2
·
1 row entry
·
7 columns
The table manages port settings for Spanning Tree Protocol 802.1d, 802.1w or 802.1s depending on the value specified by staProtocolType.
The conceptual entry of staPortTable.
Indexes
staPortIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
staPortIndex
The port and the trunk (excluding trunk member ports)
interface of the staPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of dot1dStpPort in … |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.5.2.1.1 |
||||||
|
staPortAdminEdgePort
The administrative value of the edge port parameter. A
value of true(1) indicates that this port should be assumed as an edge-port and a value of false(2) indicates that this port should be assumed as a non-edge-port. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.5.2.1.2 |
||||||
|
staPortOperEdgePort
The operational value of the edge port parameter. The object is
initialized to the value of staPortAdminEdgePort and is set false when a BPDU is received. |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.5.2.1.3 |
||||||
|
staPortAdminPointToPoint
The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of for… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.5.2.1.4 |
||||||
|
staPortOperPointToPoint
The operational point-to-point status of the LAN segment
attached to this port. This indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-de… |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.5.2.1.5 |
||||||
|
staPortLongPathCost
The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which include this port. This object is used to configure the spanning tree port path cost in the … |
Integer32r/w Constraints: range: 1-200000000 |
.1.3.6.1.4.1.3709.3.5.201.1.5.2.1.6 |
||||||
|
staPortSystemStatus
Per-port spanning tree status.
(1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled. |
P-BRIDGE-MIBEnabledStatusr/w Textual Convention: P-BRIDGE-MIBEnabledStatus EnumerationType Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.5.2.1.7 |
mirrorTable
table.1.3.6.1.4.1.3709.3.5.201.1.8.2
·
1 row entry
·
2 columns
Table of descriptive and status information about switches in this system.
An entry in the table, containing information
about a single switch in this system.
about a single switch in this system.
Indexes
mirrorSourcePort
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
mirrorSourcePort
Source port for mirrored packets. This is defined as
ifIndex in the IF-MIB. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.8.2.1.1 |
||||||||
|
mirrorType
If this value is rx(1), receive packets will
be mirrored. If this value is tx(2), transmit packets will be mirrored. If this value is all(3), all packts will be mirrored |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.8.2.1.2 |
.1.3.6.1.4.1.3709.3.5.201.1.9.8
·
1 row entry
·
2 columns
Table for current router ports.
Entry for current router ports.
Indexes
igmpSnoopRouterCurrentVlanIndex
| Column | Syntax | OID |
|---|---|---|
|
igmpSnoopRouterCurrentVlanIndex
This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3709.3.5.201.1.9.8.1.1 |
|
igmpSnoopRouterCurrentPorts
The set of ports which are current router ports.
Within this list, some router ports are static router ports. Please refer to igmpSnoopRouterStaticTable. |
Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList OctetString |
.1.3.6.1.4.1.3709.3.5.201.1.9.8.1.2 |
.1.3.6.1.4.1.3709.3.5.201.1.9.9
·
1 row entry
·
2 columns
Table for static router ports.
Entry for static router ports.
Indexes
igmpSnoopRouterStaticVlanIndex
| Column | Syntax | OID |
|---|---|---|
|
igmpSnoopRouterStaticVlanIndex
This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3709.3.5.201.1.9.9.1.1 |
|
igmpSnoopRouterStaticPorts
The set of ports which are static router ports.
|
Q-BRIDGE-MIBPortListr/w Textual Convention: Q-BRIDGE-MIBPortList OctetString |
.1.3.6.1.4.1.3709.3.5.201.1.9.9.1.2 |
.1.3.6.1.4.1.3709.3.5.201.1.9.10
·
1 row entry
·
3 columns
Table for current multicast addresses.
Entry for current multicast addresses.
Indexes
igmpSnoopMulticastCurrentVlanIndex igmpSnoopMulticastCurrentIpAddress
| Column | Syntax | OID |
|---|---|---|
|
igmpSnoopMulticastCurrentVlanIndex
This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3709.3.5.201.1.9.10.1.1 |
|
igmpSnoopMulticastCurrentIpAddress
IP address of multicast group.
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.3709.3.5.201.1.9.10.1.2 |
|
igmpSnoopMulticastCurrentPorts
The set of ports which are members.
|
Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList OctetString |
.1.3.6.1.4.1.3709.3.5.201.1.9.10.1.3 |
.1.3.6.1.4.1.3709.3.5.201.1.9.11
·
1 row entry
·
3 columns
Table for static multicast addresses.
Entry for static multicast addresses.
Indexes
igmpSnoopMulticastStaticVlanIndex igmpSnoopMulticastStaticIpAddress
| Column | Syntax | OID |
|---|---|---|
|
igmpSnoopMulticastStaticVlanIndex
This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3709.3.5.201.1.9.11.1.1 |
|
igmpSnoopMulticastStaticIpAddress
IP address of multicast group.
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.3709.3.5.201.1.9.11.1.2 |
|
igmpSnoopMulticastStaticPorts
The set of ports which are static members.
|
Q-BRIDGE-MIBPortListr/w Textual Convention: Q-BRIDGE-MIBPortList OctetString |
.1.3.6.1.4.1.3709.3.5.201.1.9.11.1.3 |
bcastStormTable
table.1.3.6.1.4.1.3709.3.5.201.1.11.1
·
1 row entry
·
3 columns
Table of descriptive and status information about
configuration of each switch ports(including expansion slot)
in this system.
An entry in the table, containing information
about configuration in one switch port of the switch.
about configuration in one switch port of the switch.
Indexes
bcastStormIfIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
bcastStormIfIndex
This is defined as ifIndex in the IF-MIB.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.11.1.1.1 |
||||
|
bcastStormStatus
Whether broadcast storm protection is enabled.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.11.1.1.2 |
||||
|
bcastStormPacketRate
Broadcast storm threshold as packets per second.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.11.1.1.3 |
vlanTable
table.1.3.6.1.4.1.3709.3.5.201.1.12.1
·
1 row entry
·
2 columns
Table for VLAN configuration.
Entry for VLAN configuration.
Indexes
vlanIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
vlanIndex
Same is dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for the VLAN of the management interface. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3709.3.5.201.1.12.1.1.1 |
||||
|
vlanAddressMethod
Method to get the IP address.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.12.1.1.2 |
prioWrrTable
table.1.3.6.1.4.1.3709.3.5.201.1.13.1
·
1 row entry
·
2 columns
Table for weighted round robin (WRR).
Entry for weighted round robin (WRR).
Indexes
prioWrrTrafficClass
| Column | Syntax | OID |
|---|---|---|
|
prioWrrTrafficClass
Traffic class for this entry, as defined in
dot1dTrafficClass in the Q-BRIDGE-MIB. The actual maximum depends on the hardware, and is equal to dot1dPortNumTrafficClasses-1. |
Integer32 Constraints: range: 0-7 |
.1.3.6.1.4.1.3709.3.5.201.1.13.1.1.1 |
|
prioWrrWeight
Weight for this entry.
|
Integer32r/w Constraints: range: 1-31 |
.1.3.6.1.4.1.3709.3.5.201.1.13.1.1.2 |
trapDestTable
table.1.3.6.1.4.1.3709.3.5.201.1.14.1
·
1 row entry
·
4 columns
A list of trap destination entries.
This entry includes a destination IP address to which to send
traps for this community.
traps for this community.
Indexes
trapDestAddress
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
trapDestAddress
The address to send traps.
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.3709.3.5.201.1.14.1.1.1 |
||||
|
trapDestCommunity
A community to which this destination address belongs.
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.3709.3.5.201.1.14.1.1.2 |
||||
|
trapDestStatus
Writing this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.14.1.1.3 |
||||
|
trapDestVersion
This variables represent the version of the Trap we wish to send to trap Receiver,
if the value is 1, mean we wish to send Version 1 trap, if the value is 2, mean we wish to send version 2 trap. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.14.1.1.4 |
rateLimitPortTable
table.1.3.6.1.4.1.3709.3.5.201.1.16.1
·
1 row entry
·
7 columns
Table for rate limit of each port.
Entry for rate limit of each port.
Indexes
rlPortIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
rlPortIndex
The port and the trunk (including trunk member) interface of
the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.16.1.1.1 |
||||
|
rlPortInputStatus
Whether input rate limit is enabled for this port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.16.1.1.2 |
||||
|
rlPortOutputStatus
Whether output rate limit is enabled for this port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.16.1.1.3 |
||||
|
rlPortInputRate
Rate-limit in kilobits per second. Must be multiple of 64.
|
Integer32r/w Constraints: range: 64-1000000 |
.1.3.6.1.4.1.3709.3.5.201.1.16.1.1.4 |
||||
|
rlPortInputBurst
Maximum burst size in kilobits. Must be power of 2.
|
Integer32r/w Constraints: range: 32-4096 |
.1.3.6.1.4.1.3709.3.5.201.1.16.1.1.5 |
||||
|
rlPortOutputRate
Rate-limit in kilobits per second. Must be multiple of 64.
|
Integer32r/w Constraints: range: 64-1000000 |
.1.3.6.1.4.1.3709.3.5.201.1.16.1.1.6 |
||||
|
rlPortOutputBurst
Maximum burst size in kilobits. Must be power of 2.
|
Integer32r/w Constraints: range: 32-4096 |
.1.3.6.1.4.1.3709.3.5.201.1.16.1.1.7 |
.1.3.6.1.4.1.3709.3.5.201.1.17.1.7
·
1 row entry
·
7 columns
The table for multiple RADIUS server.
The conceptual row for radiusMultipleServerTable.
Indexes
radiusMultipleServerIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
radiusMultipleServerIndex
The RADIUS multiple server index.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.1 |
||||
|
radiusMultipleServerAddress
IP address of a multiple RADIUS server.
IP address will be set to system default value(e.g. 10.1.0.1) after creates an entry first by setting radiusMultipleServerStatus to valid. |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.2 |
||||
|
radiusMultipleServerPortNumber
IP port number of a multiple RADIUS server.
|
Integer32r/w Constraints: range: 1-65535 |
.1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.3 |
||||
|
radiusMultipleServerKey
Key for RADIUS. This variable can only be written.
When this variable is read, it always returns a zero-length string. when this variable is written, it's max length is 48 characters. |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.4 |
||||
|
radiusMultipleServerRetransmit
Maximum number of retransmissions for RADIUS.
|
Integer32r/w Constraints: range: 1-30 |
.1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.5 |
||||
|
radiusMultipleServerTimeout
Timeout for RADIUS.
|
Integer32r/w Constraints: range: 1-65535 |
.1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.6 |
||||
|
radiusMultipleServerStatus
Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry. |
ValidStatusr/w Textual Convention: ValidStatus EnumerationType Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.8 |
ipFilterSnmpTable
table.1.3.6.1.4.1.3709.3.5.201.1.17.3.1
·
1 row entry
·
3 columns
A list of IP address entries.
This entry includes an IP address range which the system
will allow to connect to this device through SNMP.
will allow to connect to this device through SNMP.
Indexes
ipFilterSnmpAddress ipFilterSnmpMask
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
ipFilterSnmpAddress
The start IP address.
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1.1 |
||||
|
ipFilterSnmpMask
The IP mask.
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1.2 |
||||
|
ipFilterSnmpStatus
Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry. |
ValidStatusr/w Textual Convention: ValidStatus EnumerationType Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1.3 |
ipFilterHTTPTable
table.1.3.6.1.4.1.3709.3.5.201.1.17.3.2
·
1 row entry
·
3 columns
A list of IP address entries.
This entry includes an IP address range which the system
will allow to connect to this device through SNMP.
will allow to connect to this device through SNMP.
Indexes
ipFilterHTTPAddress ipFilterHTTPMask
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
ipFilterHTTPAddress
The start IP address.
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1.1 |
||||
|
ipFilterHTTPMask
The IP mask.
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1.2 |
||||
|
ipFilterHTTPStatus
Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry. |
ValidStatusr/w Textual Convention: ValidStatus EnumerationType Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1.3 |
ipFilterTelnetTable
table.1.3.6.1.4.1.3709.3.5.201.1.17.3.3
·
1 row entry
·
3 columns
A list of IP address entries.
This entry includes an IP address range which the system
will allow them to connect to this device through SNMP.
will allow them to connect to this device through SNMP.
Indexes
ipFilterTelnetAddress ipFilterTelnetMask
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
ipFilterTelnetAddress
The start IP address.
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1.1 |
||||
|
ipFilterTelnetMask
The IP mask.
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1.2 |
||||
|
ipFilterTelnetStatus
Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry. |
ValidStatusr/w Textual Convention: ValidStatus EnumerationType Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1.3 |
ipFilterSSHTable
table.1.3.6.1.4.1.3709.3.5.201.1.17.3.4
·
1 row entry
·
3 columns
A list of IP address entries.
This entry includes an IP address range which the system
will allow them to connect to this device through SNMP.
will allow them to connect to this device through SNMP.
Indexes
ipFilterSSHAddress ipFilterSSHMask
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
ipFilterSSHAddress
The start IP address.
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1.1 |
||||
|
ipFilterSSHMask
The IP mask.
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1.2 |
||||
|
ipFilterSSHStatus
Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry. |
ValidStatusr/w Textual Convention: ValidStatus EnumerationType Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1.3 |
remoteLogServerTable
table.1.3.6.1.4.1.3709.3.5.201.1.19.6.4
·
1 row entry
·
2 columns
A Table for storing the remote log Server list.
A conceptually row for remoteLogServerTable.
Indexes
remoteLogServerIp
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
remoteLogServerIp
The IP address of the remote log Server.
|
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.3709.3.5.201.1.19.6.4.1.1 |
||||
|
remoteLogServerStatus
Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry. |
ValidStatusr/w Textual Convention: ValidStatus EnumerationType Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.19.6.4.1.2 |
sntpServerTable
table.1.3.6.1.4.1.3709.3.5.201.1.20.1.3
·
1 row entry
·
2 columns
Table for SNTP servers
Entry for SNTP servers.
Indexes
sntpServerIp
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
sntpServerIp
The IP address of a server.
|
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.3709.3.5.201.1.20.1.3.1.1 |
||||
|
sntpServerStatus
Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry. |
ValidStatusr/w Textual Convention: ValidStatus EnumerationType Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.20.1.3.1.2 |
fileInfoTable
table.1.3.6.1.4.1.3709.3.5.201.1.21.1
·
1 row entry
·
9 columns
This table contain the information of the file system; we can also perform the delete, set startup file operation.
A conceptually row for fileInfoTable.
Indexes
fileInfoUnitID fileInfoFileIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
fileInfoUnitID
The switch unit in a stacking system, in a
non-stacking system, this value is always 1. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.21.1.1.1 |
||||
| fileInfoFileIndex | SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.21.1.1.2 |
||||
| fileInfoFlashId | SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.21.1.1.3 |
||||
|
fileInfoFileName
The file Name of the file System in the device.
|
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.3709.3.5.201.1.21.1.1.4 |
||||
|
fileInfoFileType
The file type of the file System in the device.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.21.1.1.5 |
||||
|
fileInfoIsStartUp
This flag indicate whether this file is a startup file. Set this
object to true(1) to indicate that this is a startup file. Setting this object to false(2) is a invalid operation. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.21.1.1.6 |
||||
|
fileInfoFileSize
The sizes (in bytes) of the file.
|
bytesSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.21.1.1.7 |
||||
|
fileInfoCreationTime
The creation time of the file, This is a text string in the
following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters of the English name of the month. '_d' is the day of month. A single-d… |
OctetString Constraints: range: 20-20 |
.1.3.6.1.4.1.3709.3.5.201.1.21.1.1.8 |
||||
|
fileInfoDelete
Write this object to delete(2) to delete a file, when
read, this always return noDelete(1). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.21.1.1.9 |
countHoldPktsTable
table.1.3.6.1.4.1.3709.3.5.201.1.22.1
·
1 row entry
·
2 columns
Table of dropped packets counters by interface for QoS statistics.
An entry in the table, containing the number of dropped packets in a single interface.
Indexes
interfaceNumber
| Column | Syntax | OID |
|---|---|---|
|
interfaceNumber
Interface Number from dropped packets.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.22.1.1.1 |
|
countHoldPkts
Counter Hold shows the number of dropped packets in a single interface.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3709.3.5.201.1.22.1.1.2 |
filterCounterInfoTable
table.1.3.6.1.4.1.3709.3.5.201.1.23.1
·
1 row entry
·
2 columns
This table contain the description about counters, so they can be used to measure performance from user-based filters.
A conceptually row for filterCounterInfoTable.
Indexes
filterCounterInfoIndex
| Column | Syntax | OID |
|---|---|---|
|
filterCounterInfoIndex
Index for counter, matches current CLI information
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.23.1.1.1 |
|
filterCounterInfoRemark
Remark is a textual description, as configured by user.
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.3709.3.5.201.1.23.1.1.2 |
filterCounterValueTable
table.1.3.6.1.4.1.3709.3.5.201.1.23.2
·
1 row entry
·
2 columns
This table contains current values for filter counters.
A conceptually row for filterCounterValueTable.
Indexes
filterCounterInfoIndex filterCounterValueIndex
| Column | Syntax | OID |
|---|---|---|
|
filterCounterValueIndex
Subcounters index identifies each internal counter that a
user-editable counter can have. Internal counters may differ from equipament model to other. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.23.2.1.1 |
|
filterCounterValue
The total number of data which matches internal subcounter.
It can be bytes or packets, according to equipment configuration. Discontinuities in the value of this counter can occur at re-initialization of… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3709.3.5.201.1.23.2.1.2 |
eapsInfoTable
table.1.3.6.1.4.1.3709.3.5.201.1.24.1
·
1 row entry
·
4 columns
This table contains EAPS information about all EAPS domains on this device.
An individual entry of this table contains EAPS
information related to that EAPS domain.
information related to that EAPS domain.
Indexes
eapsInfoId
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
eapsInfoId
This indicates the mode of the EAPS Id.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.24.1.1.1 |
||||||||||||||
|
eapsInfoName
The EAPS domain name.
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.3709.3.5.201.1.24.1.1.2 |
||||||||||||||
|
eapsInfoMode
This indicates the mode of the EAPS domain.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.24.1.1.3 |
||||||||||||||
|
eapsInfoState
This indicates the current EAPS state of this EAPS
domain. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3709.3.5.201.1.24.1.1.4 |
cfmProbeDmTable
table.1.3.6.1.4.1.3709.3.5.201.1.25.1
·
1 row entry
·
4 columns
This table contains CFM delay measurements informationS.
An individual entry of this table contains CFM
delay measurements information related to that probe.
delay measurements information related to that probe.
Indexes
cfmProbeDmIndex
| Column | Syntax | OID |
|---|---|---|
|
cfmProbeDmIndex
The index value used to identify the probe.
|
Integer32 Constraints: range: 1-32 |
.1.3.6.1.4.1.3709.3.5.201.1.25.1.1.1 |
|
cfmProbeDmAvgDelay
The average delay in microseconds of CFM delay measurement.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.25.1.1.2 |
|
cfmProbeDmAvgJitter
The average jitter in microseconds of CFM delay measurement.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.25.1.1.3 |
|
cfmProbeDmLoss
The percentage of CFM frames lost on the indicate probe.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.25.1.1.4 |
cpuActiveUsageTable
table.1.3.6.1.4.1.3709.3.5.201.1.26.1
·
1 row entry
·
2 columns
Table of cpu usage.
Table of cpu usage.
Indexes
cpuActiveUsageIndex
| Column | Syntax | OID |
|---|---|---|
|
cpuActiveUsageIndex
This object identifies the switch within the system
for which this entry contains information. This value can never be greater than switchNumber. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.26.1.1.1 |
|
cpuActiveUsageValue
The CPU usage (in hundredths of a percent).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.26.1.1.2 |
memActiveUsageTable
table.1.3.6.1.4.1.3709.3.5.201.1.26.2
·
1 row entry
·
2 columns
Table of memory usage.
Table of memory usage.
Indexes
memActiveUsageIndex
| Column | Syntax | OID |
|---|---|---|
|
memActiveUsageIndex
This object identifies the switch within the system
for which this entry contains information. This value can never be greater than switchNumber. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.26.2.1.1 |
|
memActiveUsageValue
The memory usage (percentage).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.26.2.1.2 |
cpuStandbyUsageTable
table.1.3.6.1.4.1.3709.3.5.201.1.26.3
·
1 row entry
·
2 columns
Table of cpu usage.
Table of cpu usage.
Indexes
cpuStandbyUsageIndex
| Column | Syntax | OID |
|---|---|---|
|
cpuStandbyUsageIndex
This object identifies the switch within the system
for which this entry contains information. This value can never be greater than switchNumber. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.26.3.1.1 |
|
cpuStandbyUsageValue
The CPU usage (in hundredths of a percent).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.26.3.1.2 |
memStandbyUsageTable
table.1.3.6.1.4.1.3709.3.5.201.1.26.4
·
1 row entry
·
2 columns
Table of memory usage.
Table of memory usage.
Indexes
memStandbyUsageIndex
| Column | Syntax | OID |
|---|---|---|
|
memStandbyUsageIndex
This object identifies the switch within the system
for which this entry contains information. This value can never be greater than switchNumber. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.26.4.1.1 |
|
memStandbyUsageValue
The memory usage (percentage).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.26.4.1.2 |
queuePortTable
table.1.3.6.1.4.1.3709.3.5.201.1.27.1
·
1 row entry
·
6 columns
Table for statistics of interface queues.
An entry in the table, containing information
about configuration in one switch port of the switch.
about configuration in one switch port of the switch.
Indexes
queuePortIfIndex queuePortQueueIndex
| Column | Syntax | OID |
|---|---|---|
|
queuePortIfIndex
This is defined as ifIndex in the IF-MIB.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.27.1.1.1 |
|
queuePortQueueIndex
The COS queue from the interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.27.1.1.2 |
|
queuePortSentPackets
Counter of sent packets.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3709.3.5.201.1.27.1.1.3 |
|
queuePortSentBytes
Counter of sent bytes.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3709.3.5.201.1.27.1.1.4 |
|
queuePortDroppedPackets
Counter of dropped packets.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3709.3.5.201.1.27.1.1.5 |
|
queuePortDroppedBytes
Counter of dropped bytes.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3709.3.5.201.1.27.1.1.6 |
ddTransceiversTable
table.1.3.6.1.4.1.3709.3.5.201.1.28.1
·
1 row entry
·
11 columns
Transceivers digital diagnostic table.
An entry in the table, containing information
about digital diagnostic.
about digital diagnostic.
Indexes
ddTransceiversIfIndex
| Column | Syntax | OID |
|---|---|---|
|
ddTransceiversIfIndex
This is defined as ifIndex in the IF-MIB.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.28.1.1.1 |
|
ddTransceiversTemperature
Transceiver temperature information in Celsius
|
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.3709.3.5.201.1.28.1.1.2 |
|
ddTransceiversVcc3v3
Transceiver Vcc 3v3 information in Volts
|
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.3709.3.5.201.1.28.1.1.3 |
|
ddTransceiversRxPower
Transceiver rx power information in Decibels
|
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.3709.3.5.201.1.28.1.1.4 |
|
ddTransceiversTxPower
Transceiver tx power information in Decibels
|
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.3709.3.5.201.1.28.1.1.5 |
|
ddTransceiversTxBias
Transceiver tx bias information in Amperes
|
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.3709.3.5.201.1.28.1.1.6 |
|
ddTransceiversTemperatureValue
Transceiver temperature infomation
|
Celsius (degrees C)SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.28.1.1.7 |
|
ddTransceiversVcc3v3Value
Transceiver Vcc 3v3 infomation
|
0.1 VSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.28.1.1.8 |
|
ddTransceiversRxPowerValue
Transceiver rx power infomation
|
0.1 dBmSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.28.1.1.9 |
|
ddTransceiversTxPowerValue
Transceiver tx power infomation
|
0.1 dBmSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.28.1.1.10 |
|
ddTransceiversTxBiasValue
Transceiver tx bias infomation
|
0.1 mASNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3709.3.5.201.1.28.1.1.11 |