igsLeaveProcessInterval

Object

scalar r/w Integer32

This is the interval (in seconds) after which a Leave
message is forwarded on either router port(if present)
or on all ports of a bridge (if no router port present).
          
when a leave message from a host for a group is received
by the bridge, The bridge will form a group-specific query
and sends it on the port on which the leave message is
received. A timer is started by a bridge with a time interval
equal to IgsLeaveProcessInterval.
          
If a report message is received before above timer expires,
Leave message is dropped.Otherwise Leave message is either
forwarded on all ports of the bridge or only on router port
depending upon the case.

Context

MIB: DES-1228-MIB
OID: .1.3.6.1.4.1.171.10.75.2.22.1.7
Type: scalar
Access: readwrite
Status: current
Parent: igsSystem
Siblings: 14

Related Objects

Sibling Objects

Object	Type	Syntax	OID
igsGblReportFwdOnAllPorts IGMP snooping module will forward reports only on router ports by default, to enable forwarding on all other ports the object must be set to allports.	scalar	Enumeration	`.1.3.6.1.4.1.171.10.75.2.22.1.10`
igsNextMcastFwdMode This field describes the multicast forwarding mode that will be used upon restart of the ISS Switch.	scalar	Enumeration	`.1.3.6.1.4.1.171.10.75.2.22.1.13`
igsQueryInterval The frequency at which IGMP Host-Query packets are transmitted on this interface.	scalar	Integer32	`.1.3.6.1.4.1.171.10.75.2.22.1.14`
igsQueryMaxResponseTime The maximum query response time advertised in IGMPv2 queries on this interface.	scalar	Integer32	`.1.3.6.1.4.1.171.10.75.2.22.1.15`
igsRobustnessValue The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to …	scalar	Integer32	`.1.3.6.1.4.1.171.10.75.2.22.1.16`
igsLastMembQueryInterval The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group…	scalar	Integer32	`.1.3.6.1.4.1.171.10.75.2.22.1.17`
igsQuerierStateOnOff To enable transmitting IGMP Query packets or to disable.	scalar	Enumeration	`.1.3.6.1.4.1.171.10.75.2.22.1.18`
igsStatus Enables or disables IGMP snooping in the system.	scalar	Enumeration	`.1.3.6.1.4.1.171.10.75.2.22.1.2`
igsv3Processing To enable processing of IGMPv3 messages and to operate in IGMPv3 mode, this object must be set to enabled, when set as disabled the operation will be in IGMPv2 mode.	scalar	Enumeration	`.1.3.6.1.4.1.171.10.75.2.22.1.3`
igsRouterPortPurgeInterval This is the interval (in seconds) after which a learnt router port entry will be purged. For each router port learnt, a 'RouterPortPurgeTimer' runs for 'RouterPortPurg…	scalar	Integer32	`.1.3.6.1.4.1.171.10.75.2.22.1.4`
igsHostPortPurgeInterval This is the interval (in seconds) after which a learnt host port entry will be purged. For each host port learnt, a 'PortPurgeTimer' runs for 'HostPortPurgeInterval'.…	scalar	Integer32	`.1.3.6.1.4.1.171.10.75.2.22.1.5`
igsReportForwardInterval This is the interval (in seconds) within which the next report messages for the same multicast group will not be forwarded out. The purpose of this timer is to avoid mu…	scalar	Integer32	`.1.3.6.1.4.1.171.10.75.2.22.1.6`
igsMcastEntryAgeingInterval This is the interval (in seconds) after which the target will be checked for Multicast data hit for the entry This timer will be started for every (S, G) in the contro…	scalar	Integer32	`.1.3.6.1.4.1.171.10.75.2.22.1.8`
igsSharedSegmentAggregationInterval This is the interval (in seconds) for which reports of IGMPv3 messages on a shared segment will be aggregated for a group. This timer will be started only when multiple hosts are …	scalar	Integer32	`.1.3.6.1.4.1.171.10.75.2.22.1.9`

Object

Context

Syntax

Values & Constraints

Related Objects