DES-1228-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
16
Rows
16
Columns
61

commSetTable

table
.1.3.6.1.4.1.171.10.75.2.1.1 · 1 row entry · 3 columns
Open in standard view 
A list of SNMP Set Community Entries.
commSetEntry entry .1.3.6.1.4.1.171.10.75.2.1.1.1
A list of SNMP Set Community properties.
Indexes
commSetIndex
Column Syntax OID
commSetIndex
An index that uniquely identifies an entry in the
Community Table. Eight entries are currently supported.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.171.10.75.2.1.1.1.1
commSetName
The name of this SNMP Set Community Entry.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.171.10.75.2.1.1.1.2
commSetStatus
The RowStatus for the Set Community entry.
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.2.1.1.1.3

commGetTable

table
.1.3.6.1.4.1.171.10.75.2.1.2 · 1 row entry · 3 columns
Open in standard view 
A list of SNMP Get Community Entries.
commGetEntry entry .1.3.6.1.4.1.171.10.75.2.1.2.1
A list of SNMP Get Community properties.
Indexes
commGetIndex
Column Syntax OID
commGetIndex
An index that uniquely identifies an entry in the
Community Table. Eight entries are currently supported.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.171.10.75.2.1.2.1.1
commGetName
The name of this SNMP Get Community Entry.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.171.10.75.2.1.2.1.2
commGetStatus
The RowStatus for the Get Community entry.
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.2.1.2.1.3

commTrapTable

table
.1.3.6.1.4.1.171.10.75.2.1.3 · 1 row entry · 11 columns
Open in standard view 
A list of SNMP Trap Community Entries.
commTrapEntry entry .1.3.6.1.4.1.171.10.75.2.1.3.1
A list of SNMP Trap Community properties.
Indexes
commTrapIndex
Column Syntax OID
commTrapIndex
An index that uniquely identifies an entry in the
Community Table. Eight entries are currently supported.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.171.10.75.2.1.3.1.1
commTrapName
The name of this SNMP Trap Community Entry.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.171.10.75.2.1.3.1.2
commTrapIpAddress
The IP Address of this SNMP Trap Community Entry.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.2.1.3.1.3
commTrapSNMPBootup
Bootup trap
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.2.1.3.1.5
commTrapSNMPTPLinkUpDown
Twisted Pair link up / link down trap.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.2.1.3.1.6
commTrapSNMPFiberLinkUpDown
Fiber link up / link down trap.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.2.1.3.1.7
commTrapTrapAbnormalTPRXError
Twisted Pair abnormal receive error trap.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.2.1.3.1.9
commTrapTrapAbnormalTPTXError
Twisted Pair abnormal transmit error trap.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.2.1.3.1.10
commTrapTrapAbnormalFiberRXError
Fiber abnormal receive error trap.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.2.1.3.1.11
commTrapTrapAbnormalFiberTXError
Fiber abnormal transmit error trap.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.2.1.3.1.12
commTrapStatus
The RowStatus for the Trap Community entry.
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.2.1.3.1.13

configPortTable

table
.1.3.6.1.4.1.171.10.75.2.11.6 · 1 row entry · 4 columns
Open in standard view 
A list of interface entries used for enterprise specific
configuration.  The number of entries is given by the value
of ifNumber.  All interface entries are assumed to be
Ethernet interafaces.
configPortEntry entry .1.3.6.1.4.1.171.10.75.2.11.6.1
An enterprise specific interface entry.
Indexes
configPort
Column Syntax OID
configPort
A unique value for each interface that correlates to ifIndex.
Its value ranges between 1 and the value of ifNumber.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.2.11.6.1.1
configPortSpeed
The port's speed desired state.
Enumerationr/w
Enumerated Values:
1disable
2auto
3rate10M-Half
4rate10M-Full
5rate100M-Half
6rate100M-Full
7rate1000M-Full
 .1.3.6.1.4.1.171.10.75.2.11.6.1.2
configPortOperStatus
The port's operating speed state.
Enumeration
Enumerated Values:
1down
2rate10M-Half
3rate10M-Full
4rate100M-Half
5rate100M-Full
6rate1000M-Full
 .1.3.6.1.4.1.171.10.75.2.11.6.1.3
configPortPriority
For ingress untagged packets, the per port 'Default Priority'
setting will be applied to packets of each port to provide
port-based traffic prioritization.
For ingress tagged packets, D-Link Smart Switches will refer
t…
Enumerationr/w
Enumerated Values:
1low
2middle
3high
4highest
 .1.3.6.1.4.1.171.10.75.2.11.6.1.6

configMirrorTable

table
.1.3.6.1.4.1.171.10.75.2.11.8 · 1 row entry · 5 columns
Open in standard view 
A list of the Mirror
configMirrorEntry entry .1.3.6.1.4.1.171.10.75.2.11.8.1
A Mirror entry containing the Mirror id and mode.
Indexes
configMirrorId
Column Syntax OID
configMirrorId
An index that uniquely identifies an entry in the
Mirror Table. One entries are currently supported.
Integer32
Constraints:
range: 1-1
 .1.3.6.1.4.1.171.10.75.2.11.8.1.1
configMirrorMon
When mirroring is enabled (configMirroringMode =
ingress, egress, both), this identifies the mirroring monitoring
port. This value has a valid range of 1 to ifNumber when
enabled.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.2.11.8.1.2
configMirrorTXSrc
When mirroring is enabled , this identifies the TX mirroring
source port.This value has a valid range of 1 to ifNumber
when enbaled.Each octet within this value specifies a set
of eight ports, with the first octet sp…
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.2.11.8.1.3
configMirrorRXSrc
When mirroring is enabled , this identifies the RX mirroring
source port.This value has a valid range of 1 to ifNumber
when enbaled.Each octet within this value specifies a set
of eight ports, with the first octet sp…
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.2.11.8.1.4
configMirrorStatus
The RowStatus for the Mirror entry.
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.2.11.8.1.5

tvlanTable

table
.1.3.6.1.4.1.171.10.75.2.13.1 · 1 row entry · 5 columns
Open in standard view 
A list of the VLANs
tvlanEntry entry .1.3.6.1.4.1.171.10.75.2.13.1.1
A VLAN entry containing the VLAN id and name.
Indexes
tvlanId
Column Syntax OID
tvlanId
The VLAN identifier. A maximum of 256 VLANs is supported.
The value must be from 1 to 4094.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.2.13.1.1.1
tvlanName
The VLAN name.Length must between 1 and 20.
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.171.10.75.2.13.1.1.2
tvlanMember
The set of the device's member ports that belong
to the VLAN.

Each octet within the value of this object specifies a
set of eight ports, with the first octet specifying ports
1 through 8, the second octet…
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.2.13.1.1.3
tvlanUntaggedPorts
If that bit has a value of '1' the outgoing frame on the egress
port is untagged. If that bit has a value of '0' the outgoing
frame on the egress port is tagged.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.2.13.1.1.4
tvlanStatus
The status of an entry in the VLAN Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available.
Enumerationr/w
Enumerated Values:
1active
3notready
5createAndwait
6destroy
 .1.3.6.1.4.1.171.10.75.2.13.1.1.5

tvlanPortTable

table
.1.3.6.1.4.1.171.10.75.2.13.4 · 1 row entry · 2 columns
Open in standard view 
A list of ports and their associated VLAN.
tvlanPortEntry entry .1.3.6.1.4.1.171.10.75.2.13.4.1
Information pertaining to an individual port regarding
to which VLAN it belongs.
Indexes
tvlanPortPortId
Column Syntax OID
tvlanPortPortId
A port identifier that is in the range of 1 to ifNumber.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.2.13.4.1.1
tvlanPortVlanId
The default VLAN identifier, PVID. The value must be from 1 to 4094.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.2.13.4.1.2

portTrunkTable

table
.1.3.6.1.4.1.171.10.75.2.14.1 · 1 row entry · 3 columns
Open in standard view 
A list of port trunks and their associated members.
portTrunkEntry entry .1.3.6.1.4.1.171.10.75.2.14.1.1
A port trunk entry containing the trunk id and trunk members.
Indexes
portTrunkId portTrunkMember
Column Syntax OID
portTrunkId
The port trunk identifier. The current range is from 1 to 6.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.2.14.1.1.1
portTrunkName
The Trunk name.Length must between 1 and 20.
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.171.10.75.2.14.1.1.2
portTrunkMember
A port trunk member value indicates which port is a
member of the specified trunk. Valid values are in the
range from 0 to ifNumber. A zero indicates that no port
is contained in the specifed member.
Each octet within…
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.2.14.1.1.3

staticTable

table
.1.3.6.1.4.1.171.10.75.2.21.3 · 1 row entry · 5 columns
Open in standard view 
A list of the Static MACs
staticEntry entry .1.3.6.1.4.1.171.10.75.2.21.3.1
A Static MAC entry containing the mac and forwarding port.
Indexes
staticId
Column Syntax OID
staticId
The Static MAC identifier. A maximum of 60 Static MACs is supported.
The value must be from 1 to 60
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.2.21.3.1.1
staticMac
The Static MAC associated with the Id.
MacAddressr/w
Textual Convention: MacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.2.21.3.1.2
staticPort
The Static MAC forwarding port with the ID.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.2.21.3.1.3
staticVlanID
The Static MAC VLAN ID with the ID.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.2.21.3.1.4
staticStatus
The status of an entry in the Static MAC Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available.
Enumerationr/w
Enumerated Values:
1active
3notready
5createAndwait
6destroy
 .1.3.6.1.4.1.171.10.75.2.21.3.1.5

igsVlanMcastFwdTable

table
.1.3.6.1.4.1.171.10.75.2.22.3.1 · 1 row entry · 3 columns
Open in standard view 
This table contains VLAN based multicast forwarding 
information learnt when VLAN is ENABLED in the system.
igsVlanMcastFwdEntry entry .1.3.6.1.4.1.171.10.75.2.22.3.1.1
This table contains VlanId, multicast group address and the
list of ports who have members for the multicast group.
Indexes
igsVlanMcastFwdVlanIdMac igsVlanMcastFwdGroupAddress
Column Syntax OID
igsVlanMcastFwdVlanIdMac
Vlan Id pertaining to the Multicast forwarding entry.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.10.75.2.22.3.1.1.1
igsVlanMcastFwdGroupAddress
MAC multicast group address.
MacAddress
Textual Convention: MacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.2.22.3.1.1.2
igsVlanMcastFwdPortListMac
List of ports who have members for the MAC multicast
group and the Vlan Id.
PortList
Textual Convention: PortList OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.2.22.3.1.1.3

igsVlanRouterPortListTable

table
.1.3.6.1.4.1.171.10.75.2.22.3.3 · 1 row entry · 2 columns
Open in standard view 
This table contains list of bridge ports through which
a router, in a particular VLAN, is reachable.
igsVlanRouterPortListEntry entry .1.3.6.1.4.1.171.10.75.2.22.3.3.1
Contains VlanId of router , list of reachable
router ports.
Indexes
igsVlanRouterPortListVlanId
Column Syntax OID
igsVlanRouterPortListVlanId
Vlan Id of the ports through which router is reachable.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.10.75.2.22.3.3.1.1
igsVlanRouterPortList
Contains list of bridge ports through which a router,
in a particular VLAN, is reachable. These router ports
are learnt through control messages received from routers,
and can also be configured statically.
PortList
Textual Convention: PortList OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.2.22.3.3.1.2

igsVlanFilterTable

table
.1.3.6.1.4.1.171.10.75.2.22.3.4 · 1 row entry · 2 columns
Open in standard view 
This table contains configuration to disable IGMP snooping
on specific Vlans. This Table is valid only when VLAN is
enabled in the system.
igsVlanFilterEntry entry .1.3.6.1.4.1.171.10.75.2.22.3.4.1
Contains Vlan Id , Vlan Filter Status.
Indexes
igsVlanId
Column Syntax OID
igsVlanId
Vlan Id for which IGMP snooping feature is to be disabled.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.10.75.2.22.3.4.1.1
igsVlanFilterStatus
When status is set as enabled, IGMP snooping feature
is disabled for that Vlan Id.

When status is set as disabled, the entry stands invalid.
In that case IGMP snooping feature remains enabled for
that Vla…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.2.22.3.4.1.2

dot1xAuthConfigPortTable

table
.1.3.6.1.4.1.171.10.75.2.23.2.9 · 1 row entry · 5 columns
Open in standard view 
A table that contains the configuration objects for the
Authenticator PAE associated with each port.
An entry appears in this table for each port that may
authenticate access to itself.
dot1xAuthConfigPortEntry entry .1.3.6.1.4.1.171.10.75.2.23.2.9.1
The configuration information for an Authenticator Port.
Indexes
dot1xAuthConfigPortNumber
Column Syntax OID
dot1xAuthConfigPortNumber
A unique value for each interface that correlates to ifIndex.
Its value ranges between 1 and the value of ifNumber.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.2.23.2.9.1.1
dot1xAuthConfigPortControl
The current value of the controlled Port
control parameter for the Port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.2.23.2.9.1.2
dot1xAuthConfigPortStatus
The current value of the controlled Port
status parameter for the Port.
Enumeration
Enumerated Values:
0authnull
1authorized
2unauthorized
 .1.3.6.1.4.1.171.10.75.2.23.2.9.1.3
dot1xAuthConfigPortSessionTime
The duration of the session in seconds.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.10.75.2.23.2.9.1.4
dot1xAuthConfigPortSessionUserName
The User-Name representing the identity of the
Supplicant PAE.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.171.10.75.2.23.2.9.1.5

dot1pPortTable

table
.1.3.6.1.4.1.171.10.75.2.26.3 · 1 row entry · 2 columns
Open in standard view 
A list of 802.1p port default priority Entries.
dot1pPortEntry entry .1.3.6.1.4.1.171.10.75.2.26.3.1
A list of 802.1p port default priority priorities.
Indexes
dot1pPortIndex
Column Syntax OID
dot1pPortIndex
A port identifier that is in the range of 1 to ifNumber.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.2.26.3.1.1
dot1pPortPriority
For ingress untagged packets, the per port 'Default Priority'
setting will be applied to packets of each port to provide
port-based traffic prioritization.
For ingress tagged packets, D-Link Smart Switches will refer
t…
Enumerationr/w
Enumerated Values:
1low
2middle
3high
4highest
 .1.3.6.1.4.1.171.10.75.2.26.3.1.2

dscpTable

table
.1.3.6.1.4.1.171.10.75.2.26.4 · 1 row entry · 2 columns
Open in standard view 
A list of DSCP Entries.
dscpEntry entry .1.3.6.1.4.1.171.10.75.2.26.4.1
A list of DSCP properties.
Indexes
dscpIndex
Column Syntax OID
dscpIndex
DSCP value. For ingress IP packets, the DiffServ field of IP packets
provide DSCP-based traffic prioritization information to switches.
D-Link Smart Switches will refer to the value of DiffServ filed
information and …
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.10.75.2.26.4.1.1
dscpPriority
The queuing priority mapping to DSCP value.
Enumerationr/w
Enumerated Values:
1low
2middle
3high
4highest
 .1.3.6.1.4.1.171.10.75.2.26.4.1.2

trustedHostTable

table
.1.3.6.1.4.1.171.10.75.2.28.1.2 · 1 row entry · 4 columns
Open in standard view 
A list of Trusted Host Entries.
trustedHostEntry entry .1.3.6.1.4.1.171.10.75.2.28.1.2.1
A list of Trusted Host properties.
Indexes
trustedHostID
Column Syntax OID
trustedHostID
An index that uniquely identifies an entry in the
Trusted Host Table. Three entries are currently supported.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.2.28.1.2.1.1
trustedHostIpAddress
The IP address of host you allow to access to D-Link Smart
Switch.
Your local host IP Addresses must be one of the IP Addresses
to avoid disconnection.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.2.28.1.2.1.2
trustedHostIpMask
Used to mask with IP address, it allow you set a subnet as a
trusted host entry.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.2.28.1.2.1.3
trustedHostStatus
The status of an entry in the Trusted Host Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available.
Enumerationr/w
Enumerated Values:
1active
3notready
5createAndwait
6destroy
 .1.3.6.1.4.1.171.10.75.2.28.1.2.1.4