phivRouteRoutingType

DECNET-PHIV-MIB · .1.3.6.1.2.1.18.5.25
MIB view Table view

Object

scalar mandatory r/w Enumeration 
This read-write parameter indicates the type of the executor
node. The node-type is one of the following:
          
routing-III
nonrouting-III
routing-IV
ronrouting-IV
area
          
A routing node has full routing capability. A
nonrouting node contains a subset of the Routing
routing modules. The III and IV indicate the DNA
phase of the node. Nonrouting nodes can deliver
and receive packets to and from any node, but cannot
route packets from other nodes through to other nodes.
An area node routes between areas. Refer to the Routing
specification for details.
          
For adjacent nodes, this is a read-only parameter that
indicates the type of the reachable adjacent node.
NOTE: The ROUTING-III and NONROUTING-III values are
incremented by one compared to the standard DECnet
values in order to maintain compliance with RFC 1155)

Context

MIB
DECNET-PHIV-MIB
OID
.1.3.6.1.2.1.18.5.25
Type
scalar
Access
readwrite
Status
mandatory
Parent
routing
Siblings
25

Syntax

Enumeration

Values & Constraints

Enumerated Values
1routing-III
2nonrouting-III
3area
4routing-IV
5nonrouting-IV

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
phivRouteBroadcastRouteTimer mandatory
This value determines the maximum time in seconds allowed between Routing updates on Ethernet circuits. When this timer expired before a routing update occurs, a routing update is…
scalarInteger32.1.3.6.1.2.1.18.5.1
phivRouteMaxHops mandatory
This value represents the maximum number of routing hops allowable from the executor to any other reachable node within an area. (A hop is the logical distance over a circuit betw…
scalarInteger32.1.3.6.1.2.1.18.5.10
phivRouteMaxVisits mandatory
This value represents the maximum number of nodes a message coming into the executor node can have visited. If the message is not for this node and the MAXIMUM VISITS number is ex…
scalarInteger32.1.3.6.1.2.1.18.5.11
phivRouteRoutingTimer mandatory
This value determines the maximum time in seconds allowed between Routing updates on non-Ethernet circuits. When this timer expires before a routing update occurs, a ro…
scalarInteger32.1.3.6.1.2.1.18.5.12
phivRouteSegBuffSize mandatory
This parameter value determines the maximum size of an end-to-end segment. The size is a decimal integer in the range 1-65535. This size is in bytes. This size includes protocol o…
scalarInteger32.1.3.6.1.2.1.18.5.13
phivRouteType obsolete
This parameter indicates the type of the executor node. The node-type is one of the following: routing-III nonrouting-III routing-IV ronrouting-IV area A rou…
scalarEnumeration.1.3.6.1.2.1.18.5.14
phivRouteCountAgedPktLoss mandatory
Number of aged packet losses.
scalarInteger32.1.3.6.1.2.1.18.5.15
phivRouteCountNodeUnrPktLoss mandatory
Number of node unreachable packet losses.
scalarInteger32.1.3.6.1.2.1.18.5.16
phivRouteCountOutRngePktLoss mandatory
Number of node out-of-range packet losses.
scalarInteger32.1.3.6.1.2.1.18.5.17
phivRouteCountOverSzePktLoss mandatory
Number of Oversized packet losses.
scalarInteger32.1.3.6.1.2.1.18.5.18
phivRouteCountPacketFmtErr mandatory
Number of packet format errors.
scalarInteger32.1.3.6.1.2.1.18.5.19
phivRouteBuffSize mandatory
This parameter value determines the maximum size of a Routing message. It therefore determines the maximum size message that can be forwarded. This size includes proto…
scalarInteger32.1.3.6.1.2.1.18.5.2
phivRouteCountPtlRteUpdtLoss mandatory
Number of partial routing update losses.
scalarInteger32.1.3.6.1.2.1.18.5.20
phivRouteCountVerifReject mandatory
Number of verification rejects.
scalarInteger32.1.3.6.1.2.1.18.5.21
phivLevel1RouteTable mandatory
Information about the currently known DECnet Phase IV Routes.
table-.1.3.6.1.2.1.18.5.22
phivRouteCountZeroCount mandatory
When this value is set to 2, the following objects are set to Zero: phivRouteCountAgedPktLoss, phivRouteCountNodeUnrPktLoss, phivRouteCountOutRngePktLoss, phivRouteCountOverSzePkt…
scalarEnumeration.1.3.6.1.2.1.18.5.23
phivRouteSystemAddr obsolete
DECnet Phase IV node address.
scalarPhivAddr.1.3.6.1.2.1.18.5.24
phivRouteSystemAddress mandatory
DECnet Phase IV node address.
scalarPhivAddr.1.3.6.1.2.1.18.5.26
phivRouteRoutingVers mandatory
This read-only parameter identifies the executor node's Routing version number. The format is version number, ECO, and user ECO, e.g., 4.1.0
scalarOctetString.1.3.6.1.2.1.18.5.3
phivRouteMaxAddr mandatory
This value represents the largest node number and, therefore, number of nodes that can be known about by the executor node's home area.
scalarInteger32.1.3.6.1.2.1.18.5.4
phivRouteMaxBdcastNonRouters mandatory
This value represents the maximum total number of nonrouters the executor node can have on its Ethernet circuits.
scalarInteger32.1.3.6.1.2.1.18.5.5
phivRouteMaxBdcastRouters mandatory
This value represents the maximum total number of routers the executor node can have on its Ethernet circuits.
scalarInteger32.1.3.6.1.2.1.18.5.6
phivRouteMaxBuffs mandatory
This value represents the maximum number of transmit buffers that Routing may use for all circuits.
scalarInteger32.1.3.6.1.2.1.18.5.7
phivRouteMaxCircuits mandatory
This value represents the maximum number of Routing circuits that the executor node can know about.
scalarInteger32.1.3.6.1.2.1.18.5.8
phivRouteMaxCost mandatory
This value represents the maximum total path cost allowed from the executor to any node within an area. The path cost is the sum of the circuit costs along a path between two node…
scalarInteger32.1.3.6.1.2.1.18.5.9