phivRouteMaxHops
DECNET-PHIV-MIB ·
.1.3.6.1.2.1.18.5.10
Object
scalar
mandatory
r/w
Integer32
This value represents the maximum number of routing hops allowable from the executor to any other reachable node within an area. (A hop is the logical distance over a circuit between two adjacent nodes.) This parameter defines the point where the executor node's Routing routing decision algorithm declares another node unreachable because the length of the shortest path between the two nodes is too long. For correct operation, this parameter must not be less than the network diameter. (The network diameter is the reachability distance between the two nodes of the network having the greatest reachability distance, where reachability distance is the length the shortest path between a given pair of nodes.)
Context
- MIB
- DECNET-PHIV-MIB
- OID
.1.3.6.1.2.1.18.5.10- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- routing
- Siblings
- 25
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-30
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| phivRouteBroadcastRouteTimer mandatory This value determines the maximum time in seconds
allowed between Routing updates on Ethernet
circuits. When this timer expired before a routing
update occurs, a routing update is… | scalar | Integer32 | .1.3.6.1.2.1.18.5.1 |
| phivRouteMaxVisits mandatory This value represents the maximum number of nodes a
message coming into the executor node can have visited.
If the message is not for this node and the MAXIMUM
VISITS number is ex… | scalar | Integer32 | .1.3.6.1.2.1.18.5.11 |
| phivRouteRoutingTimer mandatory This value determines the maximum time in seconds
allowed between Routing updates on non-Ethernet
circuits. When this timer expires before a routing
update occurs, a ro… | scalar | Integer32 | .1.3.6.1.2.1.18.5.12 |
| phivRouteSegBuffSize mandatory This parameter value determines the maximum size of an
end-to-end segment. The size is a decimal integer in
the range 1-65535. This size is in bytes. This size
includes protocol o… | scalar | Integer32 | .1.3.6.1.2.1.18.5.13 |
| phivRouteType obsolete This parameter indicates the type of the executor
node. The node-type is one of the following:
routing-III
nonrouting-III
routing-IV
ronrouting-IV
area
A rou… | scalar | Enumeration | .1.3.6.1.2.1.18.5.14 |
| phivRouteCountAgedPktLoss mandatory Number of aged packet losses. | scalar | Integer32 | .1.3.6.1.2.1.18.5.15 |
| phivRouteCountNodeUnrPktLoss mandatory Number of node unreachable packet losses. | scalar | Integer32 | .1.3.6.1.2.1.18.5.16 |
| phivRouteCountOutRngePktLoss mandatory Number of node out-of-range packet losses. | scalar | Integer32 | .1.3.6.1.2.1.18.5.17 |
| phivRouteCountOverSzePktLoss mandatory Number of Oversized packet losses. | scalar | Integer32 | .1.3.6.1.2.1.18.5.18 |
| phivRouteCountPacketFmtErr mandatory Number of packet format errors. | scalar | Integer32 | .1.3.6.1.2.1.18.5.19 |
| phivRouteBuffSize mandatory This parameter value determines the maximum size of
a Routing message. It therefore determines the maximum
size message that can be forwarded. This size includes
proto… | scalar | Integer32 | .1.3.6.1.2.1.18.5.2 |
| phivRouteCountPtlRteUpdtLoss mandatory Number of partial routing update losses. | scalar | Integer32 | .1.3.6.1.2.1.18.5.20 |
| phivRouteCountVerifReject mandatory Number of verification rejects. | scalar | Integer32 | .1.3.6.1.2.1.18.5.21 |
| phivLevel1RouteTable mandatory Information about the currently known DECnet Phase
IV Routes. | table | - | .1.3.6.1.2.1.18.5.22 |
| phivRouteCountZeroCount mandatory When this value is set to 2, the following objects are
set to Zero: phivRouteCountAgedPktLoss,
phivRouteCountNodeUnrPktLoss,
phivRouteCountOutRngePktLoss,
phivRouteCountOverSzePkt… | scalar | Enumeration | .1.3.6.1.2.1.18.5.23 |
| phivRouteSystemAddr obsolete DECnet Phase IV node address. | scalar | PhivAddr | .1.3.6.1.2.1.18.5.24 |
| phivRouteRoutingType mandatory This read-write parameter indicates the type of the executor
node. The node-type is one of the following:
routing-III
nonrouting-III
routing-IV
ronrouting-IV
area
… | scalar | Enumeration | .1.3.6.1.2.1.18.5.25 |
| phivRouteSystemAddress mandatory DECnet Phase IV node address. | scalar | PhivAddr | .1.3.6.1.2.1.18.5.26 |
| phivRouteRoutingVers mandatory This read-only parameter identifies the executor node's
Routing version number. The format is version number,
ECO, and user ECO, e.g., 4.1.0 | scalar | OctetString | .1.3.6.1.2.1.18.5.3 |
| phivRouteMaxAddr mandatory This value represents the largest node number and,
therefore, number of nodes that can be known about
by the executor node's home area. | scalar | Integer32 | .1.3.6.1.2.1.18.5.4 |
| phivRouteMaxBdcastNonRouters mandatory This value represents the maximum total number of
nonrouters the executor node can have on its Ethernet
circuits. | scalar | Integer32 | .1.3.6.1.2.1.18.5.5 |
| phivRouteMaxBdcastRouters mandatory This value represents the maximum total number of
routers the executor node can have on its Ethernet
circuits. | scalar | Integer32 | .1.3.6.1.2.1.18.5.6 |
| phivRouteMaxBuffs mandatory This value represents the maximum number of transmit
buffers that Routing may use for all circuits. | scalar | Integer32 | .1.3.6.1.2.1.18.5.7 |
| phivRouteMaxCircuits mandatory This value represents the maximum number of Routing
circuits that the executor node can know about. | scalar | Integer32 | .1.3.6.1.2.1.18.5.8 |
| phivRouteMaxCost mandatory This value represents the maximum total path cost
allowed from the executor to any node within an area.
The path cost is the sum of the circuit costs along
a path between two node… | scalar | Integer32 | .1.3.6.1.2.1.18.5.9 |