vplsConfigMacLearning

DC-VPLS-MIB · .1.3.6.1.4.1.629.10.18.1.1.1.11
MIB view Table view

Object

column r/w SNMPv2-TCTruthValue 
This field specifies if MAC Learning is enabled for this
VPLS.  If this field is true then MAC Learning is enabled.
If false, then MAC Learning is disabled.

Context

MIB
DC-VPLS-MIB
OID
.1.3.6.1.4.1.629.10.18.1.1.1.11
Type
column
Access
readwrite
Status
current
Parent
vplsConfigEntry
Table
vplsConfigTable
Siblings
25

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
vplsConfigPwEncapType
The MPLS PW encapsulation type used by this VPLS. Changing this value will cause an interruption to data flow for this VPLS.
columnIANA-PWE3-MIBIANAPwTypeTC.1.3.6.1.4.1.629.10.18.1.1.1.10
vplsConfigDiscardUnknownDest
If the value of this field is 'true', then frames received with an unknown destination MAC are discarded in this VPLS. If 'false', then the packets are processed.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.629.10.18.1.1.1.12
vplsConfigMacAge
The aging time for entries in the VPLS Forwarder's FDB. Set to zero to disable MAC aging.
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.629.10.18.1.1.1.13
vplsConfigMtu
The layer 2 MTU of this VPLS. When using auto-discovery and signaling, this specifies the signaled layer 2 MTU. This can be used to limit the MTU to a value lower …
columnbytes Unsigned32.1.3.6.1.4.1.629.10.18.1.1.1.14
vplsConfigMacSize
The maximum number of learned and static entries allowed in the VPLS Forwarder's FDB. A value of zero means no maximum.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.629.10.18.1.1.1.15
vplsConfigPwMacAddressLimit
The maximum number of learned and static entries allowed in the FDB for each PW binding. A value of zero means no maximum.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.629.10.18.1.1.1.16
vplsConfigControlWord
Whether or not the pseudowires use a PW control word. Changing this value will cause an interruption to data flow for this VPLS.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.629.10.18.1.1.1.17
vplsConfigSeqDelivery
Whether or not the pseudowires must provide sequenced delivery of traffic. Changing this value will cause an interruption to data flow for this VPLS.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.629.10.18.1.1.1.18
vplsConfigRouteDistinguisher
The route distinguisher for this VPLS. See [RFC4364] for a complete definition of a route distinguisher. This is only used if BGP auto-discovery is enabled (vplsCo…
columnDC-L2VPN-MIBBgpRouteDistinguisher.1.3.6.1.4.1.629.10.18.1.1.1.19
vplsIndex
Index identifying the VPLS instance.
columnDC-MASTER-TCNumericIndex.1.3.6.1.4.1.629.10.18.1.1.1.2
vplsConfigVpnId
The VPN ID to advertise as a BGP extended community, or zero if none. If the VPLS uses BGP auto-discovery and LDP signaling (vplsConfigADType = bgp and vplsConfigSi…
columnDC-L2VPN-MIBBgpExtendedCommunity.1.3.6.1.4.1.629.10.18.1.1.1.20
vplsConfigLocalVeID
The local VPLS VE ID, or zero if not specified. This is only used if BGP auto-discovery is enabled (vplsConfigADType = bgp). It can be used with BGP or LDP signali…
columnDC-L2VPN-MIBL2vpnVeIdOrZero.1.3.6.1.4.1.629.10.18.1.1.1.21
vplsConfigLocalPreference
The preference that the local PE router is the designated forwarder for this VPLS. High values are preferred to low values. This is only used if BGP auto-discovery…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.629.10.18.1.1.1.22
vplsConfigLabelBlockSize
The size of the label blocks for this VPLS. This is only used when using BGP auto-discovery with BGP signaling (vplsConfigADType = bgp and vplsConfigSigType = bgp).…
columnUnsigned32.1.3.6.1.4.1.629.10.18.1.1.1.23
vplsConfigADPwMacLearning
This field specifies if MAC Learning is enabled for BGP auto-discovered PW bindings in this VPLS. If this field and vplsConfigMacLearning are both true then MAC Lea…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.629.10.18.1.1.1.24
vplsConfigMultiCastFloodMode
This field specifies which (if any) multicast frames are flooded in this VPLS.
columnVplsMCFloodMode.1.3.6.1.4.1.629.10.18.1.1.1.25
vplsConfigIgnoreMtuMismatch
This field specifies whether mismatches of MTU size with remote PE routers should be ignored for this VPLS. If this field is false, PWs will not be established to r…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.629.10.18.1.1.1.26
vplsConfigIgnoreEncapsMismatch
This field specifies whether mismatches of encapsulation type with remote PE routers should be ignored for this VPLS. If this field is false, PWs will not be establ…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.629.10.18.1.1.1.27
vplsConfigRowStatus
The row status of this VPLS Configuration Table entry, used to create and destroy table entries.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.629.10.18.1.1.1.3
vplsConfigAdminStatus
The administrative status of this VPLS instance, used to activate and deactivate the VPLS instance.
columnDC-MASTER-TCAdminStatus.1.3.6.1.4.1.629.10.18.1.1.1.4
vplsConfigOperStatus
The current operational state of this VPLS instance. If the operational status is 'up' then the VPLS is programmed in the data plane.
columnDC-MASTER-TCNpgOperStatus.1.3.6.1.4.1.629.10.18.1.1.1.5
vplsConfigName
A textual name of the VPLS instance. If there is no local name, or this object is otherwise not applicable, then this field MUST contain a zero-length octet string.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.629.10.18.1.1.1.6
vplsConfigDescr
A textual string containing information about the VPLS service. If there is no information for this VPLS service, then this field MUST contain a zero-length octet string.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.629.10.18.1.1.1.7
vplsConfigADType
The auto-discovery protocol used by this VPLS. Changing this value will cause an interruption to data flow for this VPLS.
columnDC-L2VPN-MIBL2vpnADType.1.3.6.1.4.1.629.10.18.1.1.1.8
vplsConfigSigType
The pseudowire signaling protocol used for auto-created PWs on this VPLS. If vplsConfigADType is set to 'none' this field is ignored. If vplsConfigAD…
columnDC-L2VPN-MIBL2vpnSigType.1.3.6.1.4.1.629.10.18.1.1.1.9