vplsConfigAdminStatus
DC-VPLS-MIB ·
.1.3.6.1.4.1.629.10.18.1.1.1.4
Object
The administrative status of this VPLS instance, used to activate and deactivate the VPLS instance.
Context
- MIB
- DC-VPLS-MIB
- OID
.1.3.6.1.4.1.629.10.18.1.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- vplsConfigEntry
- Table
- vplsConfigTable
- Siblings
- 25
Syntax
DC-MASTER-TCAdminStatus
- Source
- DC-MASTER-TCAdminStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | adminStatusUp |
2 | adminStatusDown |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vplsConfigPwEncapType The MPLS PW encapsulation type used by this VPLS.
Changing this value will cause an interruption to data
flow for this VPLS. | column | IANA-PWE3-MIBIANAPwTypeTC | .1.3.6.1.4.1.629.10.18.1.1.1.10 |
| vplsConfigMacLearning This field specifies if MAC Learning is enabled for this
VPLS. If this field is true then MAC Learning is enabled.
If false, then MAC Learning is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.18.1.1.1.11 |
| vplsConfigDiscardUnknownDest If the value of this field is 'true', then frames received
with an unknown destination MAC are discarded in this
VPLS. If 'false', then the packets are processed. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.18.1.1.1.12 |
| vplsConfigMacAge The aging time for entries in the VPLS Forwarder's FDB.
Set to zero to disable MAC aging. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.629.10.18.1.1.1.13 |
| vplsConfigMtu The layer 2 MTU of this VPLS.
When using auto-discovery and signaling, this specifies
the signaled layer 2 MTU. This can be used to limit the
MTU to a value lower … | column | bytes Unsigned32 | .1.3.6.1.4.1.629.10.18.1.1.1.14 |
| vplsConfigMacSize The maximum number of learned and static entries allowed in
the VPLS Forwarder's FDB. A value of zero means no maximum. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.629.10.18.1.1.1.15 |
| vplsConfigPwMacAddressLimit The maximum number of learned and static entries allowed in
the FDB for each PW binding. A value of zero means no maximum. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.629.10.18.1.1.1.16 |
| vplsConfigControlWord Whether or not the pseudowires use a PW control word.
Changing this value will cause an interruption to data
flow for this VPLS. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.18.1.1.1.17 |
| vplsConfigSeqDelivery Whether or not the pseudowires must provide sequenced
delivery of traffic.
Changing this value will cause an interruption to data
flow for this VPLS. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.18.1.1.1.18 |
| vplsConfigRouteDistinguisher The route distinguisher for this VPLS. See [RFC4364] for
a complete definition of a route distinguisher.
This is only used if BGP auto-discovery is enabled
(vplsCo… | column | DC-L2VPN-MIBBgpRouteDistinguisher | .1.3.6.1.4.1.629.10.18.1.1.1.19 |
| vplsIndex Index identifying the VPLS instance. | column | DC-MASTER-TCNumericIndex | .1.3.6.1.4.1.629.10.18.1.1.1.2 |
| vplsConfigVpnId The VPN ID to advertise as a BGP extended community, or
zero if none.
If the VPLS uses BGP auto-discovery and LDP signaling
(vplsConfigADType = bgp and vplsConfigSi… | column | DC-L2VPN-MIBBgpExtendedCommunity | .1.3.6.1.4.1.629.10.18.1.1.1.20 |
| vplsConfigLocalVeID The local VPLS VE ID, or zero if not specified.
This is only used if BGP auto-discovery is enabled
(vplsConfigADType = bgp). It can be used with BGP or LDP
signali… | column | DC-L2VPN-MIBL2vpnVeIdOrZero | .1.3.6.1.4.1.629.10.18.1.1.1.21 |
| vplsConfigLocalPreference The preference that the local PE router is the designated
forwarder for this VPLS. High values are preferred to low
values.
This is only used if BGP auto-discovery… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.629.10.18.1.1.1.22 |
| vplsConfigLabelBlockSize The size of the label blocks for this VPLS.
This is only used when using BGP auto-discovery with BGP
signaling (vplsConfigADType = bgp and vplsConfigSigType =
bgp).… | column | Unsigned32 | .1.3.6.1.4.1.629.10.18.1.1.1.23 |
| vplsConfigADPwMacLearning This field specifies if MAC Learning is enabled for BGP
auto-discovered PW bindings in this VPLS.
If this field and vplsConfigMacLearning are both true then
MAC Lea… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.18.1.1.1.24 |
| vplsConfigMultiCastFloodMode This field specifies which (if any) multicast frames are
flooded in this VPLS. | column | VplsMCFloodMode | .1.3.6.1.4.1.629.10.18.1.1.1.25 |
| vplsConfigIgnoreMtuMismatch This field specifies whether mismatches of MTU size with
remote PE routers should be ignored for this VPLS.
If this field is false, PWs will not be established to
r… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.18.1.1.1.26 |
| vplsConfigIgnoreEncapsMismatch This field specifies whether mismatches of encapsulation
type with remote PE routers should be ignored for this
VPLS.
If this field is false, PWs will not be establ… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.18.1.1.1.27 |
| vplsConfigRowStatus The row status of this VPLS Configuration Table entry,
used to create and destroy table entries. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.629.10.18.1.1.1.3 |
| vplsConfigOperStatus The current operational state of this VPLS instance.
If the operational status is 'up' then the VPLS is
programmed in the data plane. | column | DC-MASTER-TCNpgOperStatus | .1.3.6.1.4.1.629.10.18.1.1.1.5 |
| vplsConfigName A textual name of the VPLS instance. If there is no local
name, or this object is otherwise not applicable, then
this field MUST contain a zero-length octet string. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.629.10.18.1.1.1.6 |
| vplsConfigDescr A textual string containing information about the VPLS
service. If there is no information for this VPLS
service, then this field MUST contain a zero-length octet
string. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.629.10.18.1.1.1.7 |
| vplsConfigADType The auto-discovery protocol used by this VPLS.
Changing this value will cause an interruption to data
flow for this VPLS. | column | DC-L2VPN-MIBL2vpnADType | .1.3.6.1.4.1.629.10.18.1.1.1.8 |
| vplsConfigSigType The pseudowire signaling protocol used for auto-created
PWs on this VPLS.
If vplsConfigADType is set to 'none' this field is
ignored.
If vplsConfigAD… | column | DC-L2VPN-MIBL2vpnSigType | .1.3.6.1.4.1.629.10.18.1.1.1.9 |