rtmEntityUseUnidirectionalLinks
DC-RTM-MIB ·
.1.3.6.1.4.1.629.10.7.1.1.1.39
Object
Are unidirectional links usable for the FIB maintained by
this instance of DC-RTM?
If set to 'false' then unidirectional interfaces reported
over the I3 and IGP shortcuts reported over the RPI are
discarded.
If set to 'true' then unidirectional interfaces can be
used for next hops reported over the Active Routes
Interface. Note in particular that IGP shortcuts through
TE-tunnel next hops are reported over the Active Routes
Interface in addition to native adjacency next hops.
If the active route consumers of this FIB cannot use
unidirectional links then this field should be set to
'false'. An example of such an active route consumer is
DC-PIM. Because DC-PIM uses paths for Reverse Path
Forwarding, it cannot use unidirectional links.
If this field is changed while DC-RTM is active, DC-RTM
deactivates and then reactivates in order to refresh all
routing information.
Context
- MIB
- DC-RTM-MIB
- OID
.1.3.6.1.4.1.629.10.7.1.1.1.39- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rtmEntityEntry
- Table
- rtmEntityTable
- Siblings
- 45
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rtmEntityFteIndex The index of this rtmEntityEntry. This is the HAF entity index
passed on the entity create parameters. | column | FteIndex | .1.3.6.1.4.1.629.10.7.1.1.1.1 |
| rtmEntityDsExtBgp The administrative distance used for external BGP routes.
The lower the distance for a given type of route,
the more likely a route of this type is to be used by DC-RTM
as the act… | column | DC-MASTER-TCAdminDistance | .1.3.6.1.4.1.629.10.7.1.1.1.10 |
| rtmEntityDsIsisInt1 The administrative distance used for IS-IS level 1 internal routes.
The lower the distance for a given type of route,
the more likely a route of this type is to be used by DC-RTM
… | column | DC-MASTER-TCAdminDistance | .1.3.6.1.4.1.629.10.7.1.1.1.11 |
| rtmEntityDsIsisInt2 The administrative distance used for IS-IS level 2 internal routes.
The lower the distance for a given type of route,
the more likely a route of this type is to be used by DC-RTM
… | column | DC-MASTER-TCAdminDistance | .1.3.6.1.4.1.629.10.7.1.1.1.12 |
| rtmEntityDsIsisExt1 The administrative distance used for IS-IS level 1 external routes.
The lower the distance for a given type of route,
the more likely a route of this type is to be used by DC-RTM
… | column | DC-MASTER-TCAdminDistance | .1.3.6.1.4.1.629.10.7.1.1.1.13 |
| rtmEntityDsIsisExt2 The administrative distance used for IS-IS level 2 external routes.
The lower the distance for a given type of route,
the more likely a route of this type is to be used by DC-RTM
… | column | DC-MASTER-TCAdminDistance | .1.3.6.1.4.1.629.10.7.1.1.1.14 |
| rtmEntityDsRip The administrative distance used for RIP routes.
The lower the distance for a given type of route,
the more likely a route of this type is to be used by DC-RTM
as the active route… | column | DC-MASTER-TCAdminDistance | .1.3.6.1.4.1.629.10.7.1.1.1.15 |
| rtmEntityDsEgp The administrative distance used for Exterior Gateway Protocol
routes. The lower the distance for a given type of route,
the more likely a route of this type is to be used by DC-… | column | DC-MASTER-TCAdminDistance | .1.3.6.1.4.1.629.10.7.1.1.1.16 |
| rtmEntityDsGgp The administrative distance used for Gateway-Gateway Protocol
routes. The lower the distance for a given type of route,
the more likely a route of this type is to be used by DC-R… | column | DC-MASTER-TCAdminDistance | .1.3.6.1.4.1.629.10.7.1.1.1.17 |
| rtmEntityDsHello The administrative distance used for FuzzBall HelloSpeak routes.
The lower the distance for a given type of route,
the more likely a route of this type is to be used by DC-RTM
as … | column | DC-MASTER-TCAdminDistance | .1.3.6.1.4.1.629.10.7.1.1.1.18 |
| rtmEntityDsEsis The administrative distance used for ISO 9542 routes.
The lower the distance for a given type of route,
the more likely a route of this type is to be used by DC-RTM
as the active … | column | DC-MASTER-TCAdminDistance | .1.3.6.1.4.1.629.10.7.1.1.1.19 |
| rtmEntityRowStatus Used to create and delete a DC-RTM fault tolerant entity. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.629.10.7.1.1.1.2 |
| rtmEntityDsBbnspfigp The administrative distance used for BBN SPF IGP routes.
The lower the distance for a given type of route,
the more likely a route of this type is to be used by DC-RTM
as the acti… | column | DC-MASTER-TCAdminDistance | .1.3.6.1.4.1.629.10.7.1.1.1.20 |
| rtmEntityDsIdpr The administrative distance used for InterDomain Policy Routing
routes. The lower the distance for a given type of route,
the more likely a route of this type is to be used by DC… | column | DC-MASTER-TCAdminDistance | .1.3.6.1.4.1.629.10.7.1.1.1.21 |
| rtmEntityDsIgrp The administrative distance used for IGRP routes.
The lower the distance for a given type of route,
the more likely a route of this type is to be used by DC-RTM
as the active rout… | column | DC-MASTER-TCAdminDistance | .1.3.6.1.4.1.629.10.7.1.1.1.22 |
| rtmEntityDsEigrpSmm The administrative distance used for enhanced IGRP summary routes.
The lower the distance for a given type of route,
the more likely a route of this type is to be used by DC-RTM
a… | column | DC-MASTER-TCAdminDistance | .1.3.6.1.4.1.629.10.7.1.1.1.23 |
| rtmEntityDsIntEigrp The administrative distance used for internal enhanced IGRP routes.
The lower the distance for a given type of route,
the more likely a route of this type is to be used by DC-RTM
… | column | DC-MASTER-TCAdminDistance | .1.3.6.1.4.1.629.10.7.1.1.1.24 |
| rtmEntityDsEigrpExt The administrative distance used for enhanced IGRP external routes.
The lower the distance for a given type of route,
the more likely a route of this type is to be used by DC-RTM
… | column | DC-MASTER-TCAdminDistance | .1.3.6.1.4.1.629.10.7.1.1.1.25 |
| rtmEntityDsUnknown The administrative distance used for routes which come from
an unrecognized routing protocol. The lower the distance for a
given type of route, the more likely a route of this ty… | column | DC-MASTER-TCAdminDistance | .1.3.6.1.4.1.629.10.7.1.1.1.26 |
| rtmEntityEqlCostOpt How to select which equal cost routes to give to an active
routing information consumer, if there is more than one
route to a given destination with the lowest administrative
dist… | column | EqualCostRouteOpts | .1.3.6.1.4.1.629.10.7.1.1.1.27 |
| rtmEntityDelDeadRte Whether to delete routes from a Routing Protocol Manager (RPM)
whose join to DC-RTM goes down. If this is set to TRUE then the
routes are deleted after the time specified in the … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.7.1.1.1.28 |
| rtmEntityDeadRpmTmr Only used if the option is set to TRUE to delete routes
from an RPM which DC-RTM can no longer see. This field
defines the period of time that the join to an RPM can be
down befo… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.10.7.1.1.1.29 |
| rtmEntityAdminStat The desired administrative state of the DC-RTM entity. | column | DC-MASTER-TCAdminStatus | .1.3.6.1.4.1.629.10.7.1.1.1.3 |
| rtmEntityRouteNumber The number of destination prefixes to which DC-RTM
currently has a route. This is the same as the number of
rows in the rtmRouteTable if the following are both true.
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.10.7.1.1.1.30 |
| rtmEntityAddressFamily The address family that this instance of DC-RTM supports.
The value of this field must not be changed while the row
status of this MIB is AMB_ROW_STATUS_ACTIVE and … | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.629.10.7.1.1.1.31 |
| rtmEntityDsDvmrp The administrative distance used for DVMRP routes.
The lower the distance for a given type of route,
the more likely a route of this type is to be used by DC-RTM
as the active rou… | column | DC-MASTER-TCAdminDistance | .1.3.6.1.4.1.629.10.7.1.1.1.32 |
| rtmEntityI3Index The entity index of the instance of the I3 stub to which this
instance of DC-RTM should join.
The value of this field must not be changed while the row
status of th… | column | FteIndex | .1.3.6.1.4.1.629.10.7.1.1.1.33 |
| rtmEntityI3JoinStatus The status of the I3 master join. | column | RtmMjStatus | .1.3.6.1.4.1.629.10.7.1.1.1.34 |
| rtmEntityPartnerWaitTime The period that DC-RTM waits for joins from Routing
Protocol Managers (RPMs) to be reestablished when DC-RTM
is activated. DC-RTM checks for routing table convergence
by waiting … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.10.7.1.1.1.35 |
| rtmEntityStartupTime This is the startup timer duration that is used when
DC-RTM is activated and no routing state has been retained
by the forwarding table as part of graceful restart
procedures. Th… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.10.7.1.1.1.36 |
| rtmEntityRestartTime This is the startup timer duration that is used when
DC-RTM is activated and routing state has been retained by
the forwarding table as part of graceful restart
procedures. This … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.10.7.1.1.1.37 |
| rtmEntityFtStateRetained Whether state has been maintained by the forwarding table
during a restart of DC-RTM.
This indicates which startup timer duration DC-RTM should
uses. Setting this … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.7.1.1.1.38 |
| rtmEntityOperStatus The current operational state of the DC-RTM entity. | column | DC-MASTER-TCOperStatus | .1.3.6.1.4.1.629.10.7.1.1.1.4 |
| rtmEntityBfdIndex The entity index of the instance of the BFD stub to which this
instance of DC-RTM should join.
A value of zero indicates that no BFD join is required.
… | column | DC-MASTER-TCNumericIndexOrZero | .1.3.6.1.4.1.629.10.7.1.1.1.40 |
| rtmEntityBfdJoinStatus The status of the BFD master join. | column | RtmMjStatus | .1.3.6.1.4.1.629.10.7.1.1.1.41 |
| rtmEntityEnableTrapSupport Set this object to 'true' to enable trap support in
DC-RTM.
When this field is set to 'true', DC-RTM will generate the
rtmOperStateChange, rtmStaticRouteChange and … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.7.1.1.1.42 |
| rtmEntityDisplayLocalAddrs If set to 'true', local IP addresses are listed as routes
in the rtmRouteTable and rtmRibTable, and included in
rtmEntityRouteNumber.
If set to 'false', local IP addresses are not… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.7.1.1.1.43 |
| rtmEntityRestarting If this object is true, then Graceful Restart is in progress. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.7.1.1.1.44 |
| rtmEntityRestartTimeLeft If Graceful Restart is in progress then this is the time remaining
in seconds in the Graceful Restart period. The original Graceful
Restart is configured in the Restart Period fi… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.629.10.7.1.1.1.45 |
| rtmEntityRestartExitReason Describes the outcome of the last attempt at a Graceful Restart.
If the value is 'none', no restart has yet been attempted. If
the value is 'inProgress', a restart attempt is cur… | column | RtmEntityRestartExit | .1.3.6.1.4.1.629.10.7.1.1.1.46 |
| rtmEntityDsConnctd The administrative distance used for directly connected
routes. The lower the distance for a given type of route,
the more likely a route of this type is to be used by DC-RTM
as … | column | DC-MASTER-TCAdminDistance | .1.3.6.1.4.1.629.10.7.1.1.1.5 |
| rtmEntityDsStatDf The default administrative distance used for statically
defined routes in the static routes MIB table. It can be
overridden for individual static routes. The lower the
distance … | column | DC-MASTER-TCAdminDistance | .1.3.6.1.4.1.629.10.7.1.1.1.6 |
| rtmEntityDsOspfInt The administrative distance used for OSPF internal routes.
The lower the distance for a given type of route,
the more likely a route of this type is to be used by DC-RTM
as the ac… | column | DC-MASTER-TCAdminDistance | .1.3.6.1.4.1.629.10.7.1.1.1.7 |
| rtmEntityDsOspfExt The administrative distance used for OSPF Autonomous System
external routes. The lower the distance for a given type of route,
the more likely a route of this type is to be used … | column | DC-MASTER-TCAdminDistance | .1.3.6.1.4.1.629.10.7.1.1.1.8 |
| rtmEntityDsIntBgp The administrative distance used for internal and VPN BGP routes.
The lower the distance for a given type of route,
the more likely a route of this type is to be used by DC-RTM
as… | column | DC-MASTER-TCAdminDistance | .1.3.6.1.4.1.629.10.7.1.1.1.9 |