pimNeighborOverrideInterval

DC-PIM-MIB · .1.2.826.42.1.1578918.5.71.1.1.1.2.1.8

MIB view Table view

Object

column Unsigned32

The value of the Override_Interval field of the LAN Prune
Delay option received from this neighbor, that is, the
preferred maximum value of the randomized interval during
which a PIM router can override another PIM router's Prune
message.  This object is always 0 if
pimNeighborLanPruneDelayPresent is 'false'.

Context

MIB: DC-PIM-MIB
OID: .1.2.826.42.1.1578918.5.71.1.1.1.2.1.8
Type: column
Access: readonly
Status: current
Parent: pimNeighborEntry
Table: pimNeighborTable
Siblings: 17

Syntax

Unsigned32

Values & Constraints

Object Constraints

range: 0-65535

Related Objects

Sibling Objects

Object	Type	Syntax	OID
pimNeighborIfIndex The value of ifIndex for the interface used to reach this PIM neighbor.	column	IF-MIBInterfaceIndex	`.1.2.826.42.1.1578918.5.71.1.1.1.2.1.1`
pimNeighborGenerationIDPresent Evaluates to 'true' if this neighbor is using the Generation ID option.	column	SNMPv2-TCTruthValue	`.1.2.826.42.1.1578918.5.71.1.1.1.2.1.10`
pimNeighborGenerationIDValue The value of the Generation ID from the last PIM Hello message received from this neighbor, that is, an arbitrary value which allows other PIM routers to detect when this PIM neig…	column	SNMPv2-SMIUnsigned32	`.1.2.826.42.1.1578918.5.71.1.1.1.2.1.11`
pimNeighborBidirCapable Evaluates to 'true' if this neighbor is using the Bidirectional-PIM Capable option.	column	SNMPv2-TCTruthValue	`.1.2.826.42.1.1578918.5.71.1.1.1.2.1.12`
pimNeighborDRPriorityPresent Evaluates to 'true' if this neighbor is using the DR Priority option.	column	SNMPv2-TCTruthValue	`.1.2.826.42.1.1578918.5.71.1.1.1.2.1.13`
pimNeighborDRPriority The value of the Designated Router Priority from the last PIM Hello message received from this neighbor, that is, the administrative preference for this neighbor to be the DR (a n…	column	SNMPv2-SMIUnsigned32	`.1.2.826.42.1.1578918.5.71.1.1.1.2.1.14`
pimNeighborSRCapable Evaluates to TRUE if this neighbor is using the State Refresh Capable option. State Refresh capability is not relevant for bidir or sparse-mode groups. However, be…	column	SNMPv2-TCTruthValue	`.1.2.826.42.1.1578918.5.71.1.1.1.2.1.16`
pimNeighborHoldTime The value of the Holdtime field from the last PIM Hello message received from this neighbor, that is, a value in secs for which this neighbor should be kept alive.	column	SNMPv2-SMIUnsigned32	`.1.2.826.42.1.1578918.5.71.1.1.1.2.1.17`
pimNeighborOperStatus The status of the neighbor. This is Oper Status Up at all times that this neighbor row exists except for the following: - this neighor has been heard from over an i…	column	PimNeighborOperState	`.1.2.826.42.1.1578918.5.71.1.1.1.2.1.18`
pimNeighborBfdStatus The status of the BFD session to this neighbor. If BFD session support for the interface is set to 'none', this field always has a value of 'notRequired'.	column	DC-MASTER-TCBfdSessionStatus	`.1.2.826.42.1.1578918.5.71.1.1.1.2.1.19`
pimNeighborAddressType The address type of this PIM neighbor. DC-PIM supports only the values 'ipv4' and 'ipv6' for this object.	column	INET-ADDRESS-MIBInetAddressType	`.1.2.826.42.1.1578918.5.71.1.1.1.2.1.2`
pimNeighborAddress The primary IP address of this PIM neighbor. The InetAddressType is given by the pimNeighborAddressType object.	column	OctetString	`.1.2.826.42.1.1578918.5.71.1.1.1.2.1.3`
pimNeighborUpTime The time since this PIM neighbor (last) became a neighbor of the local router.	column	SNMPv2-SMITimeTicks	`.1.2.826.42.1.1578918.5.71.1.1.1.2.1.4`
pimNeighborExpiryTime The minimum time remaining before this PIM neighbor will be aged out. The value zero indicates that this PIM neighbor will never be aged out.	column	SNMPv2-SMITimeTicks	`.1.2.826.42.1.1578918.5.71.1.1.1.2.1.5`
pimNeighborLanPruneDelayPresent Evaluates to 'true' if this neighbor is using the LAN Prune Delay option.	column	SNMPv2-TCTruthValue	`.1.2.826.42.1.1578918.5.71.1.1.1.2.1.6`
pimNeighborPropagationDelay The value of the Propagation_Delay field of the LAN Prune Delay option received from this neighbor, that is, the expected propagation delay on the link. This object is always 0 i…	column	Unsigned32	`.1.2.826.42.1.1578918.5.71.1.1.1.2.1.7`
pimNeighborTBit Whether the T bit was set in the LAN Prune Delay option received from this neighbor. The T bit specifies the ability of the neighbor to disable join suppression. T…	column	SNMPv2-TCTruthValue	`.1.2.826.42.1.1578918.5.71.1.1.1.2.1.9`