pimNeighborLanPruneDelayPresent
DC-PIM-MIB ·
.1.2.826.42.1.1578918.5.71.1.1.1.2.1.6
Object
column
SNMPv2-TCTruthValue
Evaluates to 'true' if this neighbor is using the LAN Prune Delay option.
Context
- MIB
- DC-PIM-MIB
- OID
.1.2.826.42.1.1578918.5.71.1.1.1.2.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- pimNeighborEntry
- Table
- pimNeighborTable
- Siblings
- 17
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pimNeighborIfIndex The value of ifIndex for the interface used to reach this
PIM neighbor. | column | IF-MIBInterfaceIndex | .1.2.826.42.1.1578918.5.71.1.1.1.2.1.1 |
| pimNeighborGenerationIDPresent Evaluates to 'true' if this neighbor is using the
Generation ID option. | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.2.1.10 |
| pimNeighborGenerationIDValue The value of the Generation ID from the last PIM Hello
message received from this neighbor, that is,
an arbitrary value which allows other PIM routers to detect
when this PIM neig… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.2.1.11 |
| pimNeighborBidirCapable Evaluates to 'true' if this neighbor is using the
Bidirectional-PIM Capable option. | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.2.1.12 |
| pimNeighborDRPriorityPresent Evaluates to 'true' if this neighbor is using the DR
Priority option. | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.2.1.13 |
| pimNeighborDRPriority The value of the Designated Router Priority from the last
PIM Hello message received from this neighbor, that is, the
administrative preference for this neighbor to be the DR
(a n… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.2.1.14 |
| pimNeighborSRCapable Evaluates to TRUE if this neighbor is using the State
Refresh Capable option.
State Refresh capability is not relevant for bidir or
sparse-mode groups. However, be… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.2.1.16 |
| pimNeighborHoldTime The value of the Holdtime field from the last PIM Hello
message received from this neighbor, that is,
a value in secs for which this neighbor should be kept
alive. | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.2.1.17 |
| pimNeighborOperStatus The status of the neighbor.
This is Oper Status Up at all times that this neighbor row
exists except for the following:
- this neighor has been heard from over an i… | column | PimNeighborOperState | .1.2.826.42.1.1578918.5.71.1.1.1.2.1.18 |
| pimNeighborBfdStatus The status of the BFD session to this neighbor.
If BFD session support for the interface is set to 'none',
this field always has a value of 'notRequired'. | column | DC-MASTER-TCBfdSessionStatus | .1.2.826.42.1.1578918.5.71.1.1.1.2.1.19 |
| pimNeighborAddressType The address type of this PIM neighbor.
DC-PIM supports only the values 'ipv4' and 'ipv6' for
this object. | column | INET-ADDRESS-MIBInetAddressType | .1.2.826.42.1.1578918.5.71.1.1.1.2.1.2 |
| pimNeighborAddress The primary IP address of this PIM neighbor. The
InetAddressType is given by the pimNeighborAddressType
object. | column | OctetString | .1.2.826.42.1.1578918.5.71.1.1.1.2.1.3 |
| pimNeighborUpTime The time since this PIM neighbor (last) became a neighbor
of the local router. | column | SNMPv2-SMITimeTicks | .1.2.826.42.1.1578918.5.71.1.1.1.2.1.4 |
| pimNeighborExpiryTime The minimum time remaining before this PIM neighbor will
be aged out. The value zero indicates that this PIM
neighbor will never be aged out. | column | SNMPv2-SMITimeTicks | .1.2.826.42.1.1578918.5.71.1.1.1.2.1.5 |
| pimNeighborPropagationDelay The value of the Propagation_Delay field of the LAN Prune
Delay option received from this neighbor, that is, the
expected propagation delay on the link. This object is
always 0 i… | column | Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.2.1.7 |
| pimNeighborOverrideInterval The value of the Override_Interval field of the LAN Prune
Delay option received from this neighbor, that is, the
preferred maximum value of the randomized interval during
which a … | column | Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.2.1.8 |
| pimNeighborTBit Whether the T bit was set in the LAN Prune Delay option
received from this neighbor. The T bit specifies the
ability of the neighbor to disable join suppression.
T… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.2.1.9 |