pimNbrStatsTable
DC-PIM-MIB ·
.1.2.826.42.1.1578918.5.71.1.1.1.14
Object
table
This table lists the statistics for PIM neighbors.
Note that if a neighbor's Liveness Timer expires (including
on receipt of a PIM Hello message with a zero Holdtime),
this event resets all of the statistics in this table.
However, if a neighbor's Generation ID value changes, none
of the statistics in this table are affected.
This table is not used for MGMD Snooping or Proxy.
Context
- MIB
- DC-PIM-MIB
- OID
.1.2.826.42.1.1578918.5.71.1.1.1.14- Type
- table
- Status
- current
- Parent
- pimTables
- Siblings
- 22
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pimInterfaceTable This table is used to create and manage the {interface, IP
version} pairs for which PIM is enabled.
When the entity is running MGMD Snooping or Proxy (but not
in the de… | table | - | .1.2.826.42.1.1578918.5.71.1.1.1.1 |
| pimStaticRPTable This table is used to create and manage static configuration
of RPs and group ranges.
If the group prefixes configured for two or more rows in
this table overlap, the r… | table | - | .1.2.826.42.1.1578918.5.71.1.1.1.11 |
| pimAnycastRPSetTable This table is used to create and manage Anycast-RP via PIM
Register messages (draft-ietf-pim-anycast-rp), as opposed to
via other protocols such as MSDP.
Entries must b… | table | - | .1.2.826.42.1.1578918.5.71.1.1.1.12 |
| pimGroupMappingTable The (conceptual) table listing mappings from multicast group
prefixes to the PIM mode and RP address to use for groups
within that group prefix.
Rows in this table are … | table | - | .1.2.826.42.1.1578918.5.71.1.1.1.13 |
| pimIfStatsTable This table lists the statistics for {interface, IP version}
pairs for which PIM is enabled.
Note that any messages filtered out by
pimInterfaceNeighborFilter do not con… | table | - | .1.2.826.42.1.1578918.5.71.1.1.1.15 |
| pimNmEntTable This table is used to create and manage DC-PIM Neighbor
Manager entities.
There is no reason to create rows in this table if
pimTmEntMode is always set to 'mgmd-snoopin… | table | - | .1.2.826.42.1.1578918.5.71.1.1.1.16 |
| pimNmEntStatsTable This table lists the statistics for DC-PIM Neighbor Manager
entities.
Note that any messages filtered out by
pimInterfaceNeighborFilter do not contribute to any
statist… | table | - | .1.2.826.42.1.1578918.5.71.1.1.1.17 |
| pimTmEntTable This table is used to create and manage DC-PIM TIB Manager
entities. | table | - | .1.2.826.42.1.1578918.5.71.1.1.1.18 |
| pimTmMjTable This table is used to create and manage the master joins
that DC-PIM TIB Manager forms to other entities. Each join
is represented by a row in this table. The status of each
joi… | table | - | .1.2.826.42.1.1578918.5.71.1.1.1.19 |
| pimNeighborTable The (conceptual) table listing the router's PIM neighbors.
This table is not used for MGMD Snooping or Proxy. | table | - | .1.2.826.42.1.1578918.5.71.1.1.1.2 |
| pimTmSjTable This table shows which entities the DC-PIM TIB Manager is
joined to as slave. Each join is represented by a row in
this table. | table | - | .1.2.826.42.1.1578918.5.71.1.1.1.20 |
| pimBidirDFElectionTable The (conceptual) table listing the per-RP Designated
Forwarder (DF) Election state for each interface for all the
RPs in BIDIR-PIM mode.
This table is empty if 'bidir' … | table | - | .1.2.826.42.1.1578918.5.71.1.1.1.21 |
| pimStaticRPMultiTable This table performs the same role as pimStaticRPTable, but
it allows multiple static RPs to be configured for the same
ASM or BIDIR group range.
This allows for RP load… | table | - | .1.2.826.42.1.1578918.5.71.1.1.1.22 |
| pimGroupAddrMappingTable The (conceptual) table listing the PIM mode and RP address
(if any) in use for each multicast group address.
See the pimGroupMappingTable for the algorithm that DC-PIM
… | table | - | .1.2.826.42.1.1578918.5.71.1.1.1.23 |
| pimTmEntStatsTable This table lists the statistics for DC-PIM TIB Manager
entities.
The statistics in this table can be cleared using the
pimTmEntClearCounters field. | table | - | .1.2.826.42.1.1578918.5.71.1.1.1.24 |
| pimNbrSecAddressTable The (conceptual) table listing the secondary addresses
advertised by each PIM neighbor (on a subset of the rows of
the pimNeighborTable defined above).
This table is no… | table | - | .1.2.826.42.1.1578918.5.71.1.1.1.3 |
| pimStarGTable The (conceptual) table listing the non-interface specific
(*,G) state that the entity maintains.
This MIB table is not used for MGMD Snooping or PIM-DM, nor
for MGMD Pr… | table | - | .1.2.826.42.1.1578918.5.71.1.1.1.4 |
| pimStarGITable The (conceptual) table listing the interface-specific (*,G)
state that the entity maintains.
For MGMD Proxy or Snooping, or PIM-DM, (*,G,I) state exists
only because of… | table | - | .1.2.826.42.1.1578918.5.71.1.1.1.5 |
| pimSGTable The (conceptual) table listing the non-interface specific
(S,G) state that the entity maintains.
This MIB table is not used for MGMD Snooping or MGMD Proxy
(except in t… | table | - | .1.2.826.42.1.1578918.5.71.1.1.1.6 |
| pimSGITable The (conceptual) table listing the interface-specific (S,G)
state that the entity maintains.
For MGMD Proxy or Snooping, (S,G,I) state exists only
because of local grou… | table | - | .1.2.826.42.1.1578918.5.71.1.1.1.7 |
| pimSGRptTable The (conceptual) table listing the non-interface specific
(S,G,rpt) state that the entity maintains.
This MIB table is not used for MGMD Snooping or PIM-DM or
BIDIR-PIM… | table | - | .1.2.826.42.1.1578918.5.71.1.1.1.8 |
| pimSGRptITable The (conceptual) table listing the interface-specific
(S,G,rpt) state that the entity maintains.
For MGMD Proxy or Snooping, or PIM-DM or BIDIR-PIM,
(S,G,I,rpt) state e… | table | - | .1.2.826.42.1.1578918.5.71.1.1.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pimNbrStatsEntry An entry (conceptual row) in the pimNbrStatsTable. | row | - | .1.2.826.42.1.1578918.5.71.1.1.1.14.1 |