pimGroupAddrMappingTable

DC-PIM-MIB · .1.2.826.42.1.1578918.5.71.1.1.1.23

Object

table

The (conceptual) table listing the PIM mode and RP address
(if any) in use for each multicast group address.
          
See the pimGroupMappingTable for the algorithm that DC-PIM
uses to determine the PIM mode and RP address for a given
multicast group address.  DC-PIM runs this algorithm in full
(including the per group algorithm specified by
pimTmEntRPMultipathAlgorithm if necessary) when populating
a row in the pimGroupAddrMappingTable.
          
There is a row in this table for every possible multicast
group address, whether or not any state exists for the group
in question.  It is only possible to read a specific row
from the table, and 'get next' operations are not allowed.
          
If pimTmEntMode is set to 'mgmd-snooping' or 'mgmd-proxy',
then reading this table has no meaning.

Context

MIB: DC-PIM-MIB
OID: .1.2.826.42.1.1578918.5.71.1.1.1.23
Type: table
Status: current
Parent: pimTables
Siblings: 22
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
pimInterfaceTable This table is used to create and manage the {interface, IP version} pairs for which PIM is enabled. When the entity is running MGMD Snooping or Proxy (but not in the de…	table	-	`.1.2.826.42.1.1578918.5.71.1.1.1.1`
pimStaticRPTable This table is used to create and manage static configuration of RPs and group ranges. If the group prefixes configured for two or more rows in this table overlap, the r…	table	-	`.1.2.826.42.1.1578918.5.71.1.1.1.11`
pimAnycastRPSetTable This table is used to create and manage Anycast-RP via PIM Register messages (draft-ietf-pim-anycast-rp), as opposed to via other protocols such as MSDP. Entries must b…	table	-	`.1.2.826.42.1.1578918.5.71.1.1.1.12`
pimGroupMappingTable The (conceptual) table listing mappings from multicast group prefixes to the PIM mode and RP address to use for groups within that group prefix. Rows in this table are …	table	-	`.1.2.826.42.1.1578918.5.71.1.1.1.13`
pimNbrStatsTable This table lists the statistics for PIM neighbors. Note that if a neighbor's Liveness Timer expires (including on receipt of a PIM Hello message with a zero Holdtime), …	table	-	`.1.2.826.42.1.1578918.5.71.1.1.1.14`
pimIfStatsTable This table lists the statistics for {interface, IP version} pairs for which PIM is enabled. Note that any messages filtered out by pimInterfaceNeighborFilter do not con…	table	-	`.1.2.826.42.1.1578918.5.71.1.1.1.15`
pimNmEntTable This table is used to create and manage DC-PIM Neighbor Manager entities. There is no reason to create rows in this table if pimTmEntMode is always set to 'mgmd-snoopin…	table	-	`.1.2.826.42.1.1578918.5.71.1.1.1.16`
pimNmEntStatsTable This table lists the statistics for DC-PIM Neighbor Manager entities. Note that any messages filtered out by pimInterfaceNeighborFilter do not contribute to any statist…	table	-	`.1.2.826.42.1.1578918.5.71.1.1.1.17`
pimTmEntTable This table is used to create and manage DC-PIM TIB Manager entities.	table	-	`.1.2.826.42.1.1578918.5.71.1.1.1.18`
pimTmMjTable This table is used to create and manage the master joins that DC-PIM TIB Manager forms to other entities. Each join is represented by a row in this table. The status of each joi…	table	-	`.1.2.826.42.1.1578918.5.71.1.1.1.19`
pimNeighborTable The (conceptual) table listing the router's PIM neighbors. This table is not used for MGMD Snooping or Proxy.	table	-	`.1.2.826.42.1.1578918.5.71.1.1.1.2`
pimTmSjTable This table shows which entities the DC-PIM TIB Manager is joined to as slave. Each join is represented by a row in this table.	table	-	`.1.2.826.42.1.1578918.5.71.1.1.1.20`
pimBidirDFElectionTable The (conceptual) table listing the per-RP Designated Forwarder (DF) Election state for each interface for all the RPs in BIDIR-PIM mode. This table is empty if 'bidir' …	table	-	`.1.2.826.42.1.1578918.5.71.1.1.1.21`
pimStaticRPMultiTable This table performs the same role as pimStaticRPTable, but it allows multiple static RPs to be configured for the same ASM or BIDIR group range. This allows for RP load…	table	-	`.1.2.826.42.1.1578918.5.71.1.1.1.22`
pimTmEntStatsTable This table lists the statistics for DC-PIM TIB Manager entities. The statistics in this table can be cleared using the pimTmEntClearCounters field.	table	-	`.1.2.826.42.1.1578918.5.71.1.1.1.24`
pimNbrSecAddressTable The (conceptual) table listing the secondary addresses advertised by each PIM neighbor (on a subset of the rows of the pimNeighborTable defined above). This table is no…	table	-	`.1.2.826.42.1.1578918.5.71.1.1.1.3`
pimStarGTable The (conceptual) table listing the non-interface specific (*,G) state that the entity maintains. This MIB table is not used for MGMD Snooping or PIM-DM, nor for MGMD Pr…	table	-	`.1.2.826.42.1.1578918.5.71.1.1.1.4`
pimStarGITable The (conceptual) table listing the interface-specific (,G) state that the entity maintains. For MGMD Proxy or Snooping, or PIM-DM, (,G,I) state exists only because of…	table	-	`.1.2.826.42.1.1578918.5.71.1.1.1.5`
pimSGTable The (conceptual) table listing the non-interface specific (S,G) state that the entity maintains. This MIB table is not used for MGMD Snooping or MGMD Proxy (except in t…	table	-	`.1.2.826.42.1.1578918.5.71.1.1.1.6`
pimSGITable The (conceptual) table listing the interface-specific (S,G) state that the entity maintains. For MGMD Proxy or Snooping, (S,G,I) state exists only because of local grou…	table	-	`.1.2.826.42.1.1578918.5.71.1.1.1.7`
pimSGRptTable The (conceptual) table listing the non-interface specific (S,G,rpt) state that the entity maintains. This MIB table is not used for MGMD Snooping or PIM-DM or BIDIR-PIM…	table	-	`.1.2.826.42.1.1578918.5.71.1.1.1.8`
pimSGRptITable The (conceptual) table listing the interface-specific (S,G,rpt) state that the entity maintains. For MGMD Proxy or Snooping, or PIM-DM or BIDIR-PIM, (S,G,I,rpt) state e…	table	-	`.1.2.826.42.1.1578918.5.71.1.1.1.9`

Child Objects