pimInterfaceGraftRetryInterval
DC-PIM-MIB ·
.1.2.826.42.1.1578918.5.71.1.1.1.1.1.28
Object
The minimum interval that must transpire between two
successive Graft(S,G) messages sent by a router. This
object corresponds to the 'Graft_Retry_Period' timer value
defined in the PIM-DM specification (RFC3973).
This field is only relevant to PIM-DM. It is ignored if
either
- 'dense' is clear for pimTmEntMode
- pimTmEntMgmdProxy is 'true'.
Context
- MIB
- DC-PIM-MIB
- OID
.1.2.826.42.1.1578918.5.71.1.1.1.1.1.28- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- pimInterfaceEntry
- Table
- pimInterfaceTable
- Siblings
- 50
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pimInterfaceIfIndex The ifIndex value of this PIM interface. | column | IF-MIBInterfaceIndex | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.1 |
| pimInterfaceHelloHoldtime The value set in the Holdtime field of PIM Hello messages
transmitted on this interface, that is, the amount of time
a receiver must consider the neighbor reachable, in the
absenc… | column | seconds Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.11 |
| pimInterfaceJoinPruneHoldtime The value inserted into the Holdtime field of a PIM
Join/Prune message sent on this interface, that is, the
amount of time a receiver must keep the Join/Prune state
alive, in the … | column | seconds Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.12 |
| pimInterfacePropagationDelay The value this router inserts into the Propagation_Delay
field of the LAN Prune Delay option in the PIM Hello
messages it sends on this interface, that is, the expected
propagatio… | column | milliseconds Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.14 |
| pimInterfaceOverrideInterval The value this router inserts into the Override_Interval
field of the LAN Prune Delay option in the PIM Hello
messages it sends on this interface, that is, the preferred
maximum v… | column | milliseconds Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.15 |
| pimInterfaceGenerationIDValue The value of the Generation ID this router inserted in the
last PIM Hello message it sent on this interface, that is,
an arbitrary value which allows PIM neighbors to detect when
… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.17 |
| pimInterfaceDRPriority The Designated Router Priority value inserted into the DR
Priority option on this interface. If all routers on the
interface include the DR Priority option in their PIM
Hello mes… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.19 |
| pimInterfaceIPVersion The IP version of this PIM interface. A physical interface
may be configured in multiple modes concurrently, for example
IPv4 and IPv6, but the traffic is considered to be
logica… | column | INET-ADDRESS-MIBInetVersion | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.2 |
| pimInterfaceLanDelayEnabled Evaluates to 'true' if all routers on this interface are
using the LAN Prune Delay option. This field is ignored if
pimTmEntMgmdProxy is set to 'true'. | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.20 |
| pimInterfaceEffectPropagDelay The Effective Propagation Delay on this interface. This
object is always 500 if pimInterfaceLanDelayEnabled is
'false'. This field is ignored if pimTmEntMgmdProxy is set to
'tru… | column | milliseconds Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.21 |
| pimInterfaceEffectOverrideIvl The Effective Override Interval on this interface. This
object is always 2500 if pimInterfaceLanDelayEnabled is
'false'. This field is ignored if pimTmEntMgmdProxy is set to
'tr… | column | milliseconds Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.22 |
| pimInterfaceSuppressionEnabled Whether join suppression is enabled on this interface.
This object is always 'true' if pimInterfaceLanDelayEnabled
is 'false'. This field is ignored if pimTmEntMgmdProxy is set
t… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.23 |
| pimInterfaceBidirCapable Evaluates to 'true' if all routers on this interface are
using the Bidirectional-PIM Capable option.
This field is ignored if pimTmEntMgmdProxy is set to
'true'. | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.24 |
| pimInterfaceDRPriorityEnabled Evaluates to 'true' if all routers on this interface are
using the DR Priority option.
This field is only relevant for PIM-SM, but DC-PIM
evaluates it from received… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.25 |
| pimInterfaceStatus The status of this entry. Creating the entry enables PIM
on the interface; destroying the entry disables PIM on the
interface.
All writeable objects in this entry … | column | SNMPv2-TCRowStatus | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.27 |
| pimInterfaceSRAllCapable Evaluates to 'true' if all routers on this interface are
using the State Refresh option.
This field is only relevant to PIM-DM. It is always
'false' if either
… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.29 |
| pimInterfaceAddressType The address type of this PIM interface.
DC-PIM returns the same entry for this object as for the
pimInterfaceIPVersion object. | column | INET-ADDRESS-MIBInetAddressType | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.3 |
| pimInterfaceAddress The primary IP address of this router on this PIM
interface. The InetAddressType is given by the
pimInterfaceAddressType object. | column | OctetString | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.4 |
| pimInterfaceNetMaskLength The network mask length for the primary IP address of this
router on this PIM interface. The InetAddressType is given
by the pimInterfaceAddressType object. A value of 0
indicat… | column | Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.5 |
| pimInterfaceAdminStatus The desired administrative state of this interface. | column | DC-MASTER-TCAdminStatus | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.51 |
| pimInterfaceOperStatus The current operational state of this interface. | column | DC-MASTER-TCNpgOperStatus | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.52 |
| pimInterfaceStubInterface Whether this interface is a 'stub interface' with regard to
PIM. If this is set to 'true', no PIM packets are sent or
processed (if received) on this interface. This should be
s… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.53 |
| pimInterfaceP2PNoHellos Whether this interface is a point-to-point interface on
which we do not require the neighbor to send PIM-Hello
signals. Provided for back-compatibility with some older
implementa… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.54 |
| pimInterfaceMgmdEntIndex The HAF entity index of the DC-MGMD (for example, for IPv4
this is DC-IGMP) Router component that owns this interface.
Zero is a wildcard value meaning that no DC-MGMD Router
comp… | column | DC-MASTER-TCNumericIndexOrZero | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.55 |
| pimInterfaceNeighborCount The number of PIM neighbors on this interface.
This field is ignored if pimTmEntMgmdProxy is set to
'true'. | column | SNMPv2-SMIGauge32 | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.56 |
| pimInterfaceStarGStateLimit The maximum number of groups for which DC-PIM TIB Manager
is allowed to store (*,G,I) state specific to this
interface. A value of zero means that there is no limit.
… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.57 |
| pimInterfaceStarGStateWarnThold DC-PIM TIB Manager logs an exception if the number of
groups for which it is storing (*,G,I) state specific to
this interface exceeds this value. A value of zero means
that there… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.58 |
| pimInterfaceStarGStateStored The number of groups for which DC-PIM TIB Manager is
storing (*,G,I) state specific to this interface. | column | SNMPv2-SMIGauge32 | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.59 |
| pimInterfaceDR The primary IP address of the Designated Router on this
PIM interface. The InetAddressType is given by the
pimInterfaceAddressType object.
This field is ignored if… | column | OctetString | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.6 |
| pimInterfaceSGStateLimit The maximum number of {source, group} pairs for which
DC-PIM TIB Manager is allowed to store (S,G,I) state
specific to this interface. A value of zero means that
there is no limi… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.60 |
| pimInterfaceSGStateWarnThold DC-PIM TIB Manager logs an exception if the number of
{source, group} pairs for which it is storing (S,G,I)
state specific to this interface exceeds this value. A
value of zero m… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.61 |
| pimInterfaceSGStateStored The number of {source, group} pairs for which DC-PIM TIB
Manager is storing (S,G,I) state specific to this
interface. | column | SNMPv2-SMIGauge32 | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.62 |
| pimInterfaceUseNeighborFilter Setting this object to 'true' enables the neighbor filter
specified by pimInterfaceNeighborFilter.
This field is ignored if pimTmEntMgmdProxy is set to
'true'. | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.63 |
| pimInterfaceNeighborFilter When neighbor filtering is enabled (that is, when
pimInterfaceUseNeighborFilter is 'true'), the local router
will process link-local multicast PIM messages received on
this interf… | column | DC-MASTER-TCStdAccessListListIndexOrZero | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.64 |
| pimInterfaceAssertInterval The frequency at which this router sends PIM Assert
messages on this interface when it is the assert winner.
This object corresponds to the 'Assert_Time' minus the
'Assert_Overrid… | column | seconds Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.65 |
| pimInterfaceAssertHoldtime The interval before this router leaves assert loser state
on this interface, unless it receives a PIM Assert message
that refreshes this state. This object corresponds to the
'As… | column | seconds Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.66 |
| pimInterfaceDomainBorder Whether or not this interface is a PIM domain border. The
effect of being a PIM domain border interface is to disable
the BSR protocol, thus allowing each PIM domain to separatel… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.67 |
| pimInterfaceUseAsmGrpFilter Setting this object to 'true' enables the PIM-SM ASM and
BIDIR-PIM group filter specified by
pimInterfaceAsmGrpFilter.
This field is only relevant for PIM-SM and BI… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.68 |
| pimInterfaceAsmGrpFilter When PIM-SM ASM / BIDIR-PIM group filtering is enabled
(that is, when pimInterfaceUseAsmGrpFilter is 'true'),
then for groups in the PIM-SM ASM and BIDIR-PIM spaces the
local rout… | column | DC-MASTER-TCStdAccessListListIndexOrZero | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.69 |
| pimInterfaceHelloInterval The frequency at which PIM Hello messages are transmitted
on this interface. This object corresponds to the
'Hello_Period' timer value defined in the PIM-SM and
PIM-DM specificat… | column | seconds Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.7 |
| pimInterfaceUseSsmSrcAndGrpFilt Setting this object to 'true' enables the SSM source and
group filter specified by pimInterfaceSsmSrcAndGrpFilter.
This field is only relevant for PIM-SM. It is ig… | column | SNMPv2-TCTruthValue | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.70 |
| pimInterfaceSsmSrcAndGrpFilter When SSM source and group filtering is enabled (that is,
when pimInterfaceUseSsmSrcAndGrpFilt is 'true'), then for
groups in the SSM space the local router will
- … | column | DC-MASTER-TCExtAccessListListIndexOrZero | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.71 |
| pimInterfaceSiteName Site name corresponding to the remote endpoint of the PIM interface | column | OctetString | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.72 |
| pimInterfaceIfName Name of the interface | column | OctetString | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.73 |
| pimInterfaceDFElectionRobustness The number of times that the local router sends copies of
the same DF Offer or DF Winner message.
This object corresponds to the 'Election_Robustness' value
defined… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.74 |
| pimInterfaceDFElectionOfferIvl The interval between resends of the same DF message, prior
to subtracting a random amount of jitter.
This object corresponds to the 'Offer_Period' value
defined in … | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.75 |
| pimInterfaceDFElectionBackoffIvl The interval that the acting DF waits after learning of an
MRIB change, before passing the role to the best
neighboring router.
This object corresponds to the 'Back… | column | SNMPv2-SMIUnsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.76 |
| pimInterfaceBfdDesired Indicates the type of Bidirectional Forwarding Detection
(BFD) support desired on this interface.
This field is ignored if pimInterfaceP2PNoHellos is set to
'true'.… | column | PimBfdSessionType | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.77 |
| pimInterfaceTrigHelloInterval The maximum time before this router sends a triggered PIM
Hello message on this interface. This object corresponds
to the 'Triggered_Hello_Delay' timer value defined in the
PIM-S… | column | seconds Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.8 |
| pimInterfaceJoinPruneInterval The frequency at which this router sends PIM Join/Prune
messages on this PIM interface. This object corresponds
to the 't_periodic' timer value defined in the PIM-SM and
BIDIR-PI… | column | seconds Unsigned32 | .1.2.826.42.1.1578918.5.71.1.1.1.1.1.9 |