isisDisChange
DC-ISIS-MIB ·
.1.3.6.1.4.1.629.10.10.2.0.18
Object
notification
An IS-IS instance sends this notification if the DIS changes at level 1 or level 2.
Context
- MIB
- DC-ISIS-MIB
- OID
.1.3.6.1.4.1.629.10.10.2.0.18- Type
- notification
- Status
- current
- Parent
- isisTrapPrefix
- Siblings
- 17
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| isisDatabaseOverload This notification is generated when the system
enters or leaves the Overload state. The number
of times this has been generated and cleared is kept
track of by isisSysStatLSPDbas… | notification | - | .1.3.6.1.4.1.629.10.10.2.0.1 |
| isisAttemptToExceedMaxSequence When the sequence number on an LSP we generate
wraps the 32-bit sequence counter, we purge and
wait to re-announce this information. This
notification describes that event. Sinc… | notification | - | .1.3.6.1.4.1.629.10.10.2.0.10 |
| isisSequenceNumberSkip When we receive an LSP with our System ID
and different contents, we may need to reissue
the LSP with a higher sequence number.
We send this notification if we need to … | notification | - | .1.3.6.1.4.1.629.10.10.2.0.11 |
| isisCircIndTable A notification sent when the value of isisCircOperState for
a circuit changes to operStatusUp, operStatusDown or
operStatusActFailed. | notification | - | .1.3.6.1.4.1.629.10.10.2.0.12 |
| isisExtPassCircuitInd A notification sent when the value of isisCircOperState for
a circuit not configured to run the IS-IS protocol (such as
an external, TE-only or passive circuit) changes to
operSta… | notification | - | .1.3.6.1.4.1.629.10.10.2.0.13 |
| isisOperStateChange This notification is generated when the IS-IS system
changes operational state to operStatusUp, operStatusDown or
operStatusActFailed. | notification | - | .1.3.6.1.4.1.629.10.10.2.0.14 |
| isisLspAuthFailure An IS-IS instance sends this notification if a received
LSP has failed to authenticate. | notification | - | .1.3.6.1.4.1.629.10.10.2.0.15 |
| isisHelloAuthFailure An IS-IS instance sends this notification if a received
Hello has failed to authenticate. | notification | - | .1.3.6.1.4.1.629.10.10.2.0.16 |
| isisAttachedStateChange This notification is generated when the Attached state for a
topology changes and the topology is operationally up. | notification | - | .1.3.6.1.4.1.629.10.10.2.0.17 |
| isisManualAddressDrops This notification is generated when one of the
manual areaAddresses assigned to this system is
ignored when computing routes. The object
isisNotificationAreaAddress describes the… | notification | - | .1.3.6.1.4.1.629.10.10.2.0.2 |
| isisIDLenMismatch A notification sent when we receive a PDU
with a different value of the System ID Length.
This notification includes an index to identify
the circuit where we saw the PDU and the … | notification | - | .1.3.6.1.4.1.629.10.10.2.0.3 |
| isisMaxAreaAddressesMismatch A notification sent when we receive a PDU
with a different value of the Maximum Area
Addresses. This notification includes the
header of the packet, which may help a
network mana… | notification | - | .1.3.6.1.4.1.629.10.10.2.0.4 |
| isisOwnLSPPurge A notification sent when we receive a PDU
with our systemID and zero age. This
notification includes the circuit Index
and router ID from the LSP, if available,
which may help a … | notification | - | .1.3.6.1.4.1.629.10.10.2.0.5 |
| isisAreaMismatch A notification sent when we receive a Hello
PDU from an IS which does not share any
area address. This notification includes
the header of the packet, which may help a
network man… | notification | - | .1.3.6.1.4.1.629.10.10.2.0.6 |
| isisRejectedAdjacency A notification sent when we receive a Hello
PDU from an IS, but do not establish an
adjacency for some reason.
This should be an edge-triggered notification.
We should … | notification | - | .1.3.6.1.4.1.629.10.10.2.0.7 |
| isisAdjacencyChange A notification sent when an adjacency changes
state, entering or leaving state up.
The first 6 bytes of the isisPduLspId are the
SystemID of the adjacent IS.
The isisAd… | notification | - | .1.3.6.1.4.1.629.10.10.2.0.8 |
| isisLSPErrorDetected This notification is generated when we receive
an LSP with a parse error. The isisCircIfIndex
holds in index of the circuit on which the PDU
arrived. The isisPduFragment holds s… | notification | - | .1.3.6.1.4.1.629.10.10.2.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| isisNotificationSysInstance The unique identifier of the Integrated IS-IS
instance for this notification. | scalar | Integer32 | .1.3.6.1.4.1.629.10.10.1.10.1.8 |
| isisNotificationSysLevelIndex The system level for this notification. | scalar | IsisAdjLevel | .1.3.6.1.4.1.629.10.10.1.10.1.9 |
| isisCircIfIndex The value of ifIndex for the interface to which this
circuit corresponds. This object cannot be modified
after creation.
In DC-ISIS this is also used as the 3-way… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.629.10.10.1.3.2.1.2 |
| isisNotificationDisState The current state of the DIS. | scalar | Enumeration | .1.3.6.1.4.1.629.10.10.1.10.1.12 |
| isisCircLevelDesIS The ID of the LAN Designated Intermediate System
on this circuit at this level. If, for any reason,
this system is not partaking in the relevant
Designated Intermediate System ele… | column | CircuitID | .1.3.6.1.4.1.629.10.10.1.4.1.1.7 |