evpnEviRdCfgOrAuto
DC-EVPN-MIB ·
.1.2.826.0.1.1578918.5.94.10.1.1.4.1.7
Object
column
r/w
EvpnCfgOrAuto
Specifies whether this EVPN instance uses a configured or auto-derived route distiguisher.
Context
- MIB
- DC-EVPN-MIB
- OID
.1.2.826.0.1.1578918.5.94.10.1.1.4.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- evpnEviEntry
- Table
- evpnEviTable
- Siblings
- 14
Syntax
EvpnCfgOrAuto
- Source
- EvpnCfgOrAuto
- Base type
Enumeration
Values & Constraints
Type Values
1 | none |
2 | configured |
3 | auto |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| evpnEviRtCfgOrAuto Specifies whether this EVPN instance uses configured
or auto-derived route targets.
Currently, only auto-derived route targets are supported,
so the value must be s… | column | EvpnCfgOrAuto | .1.2.826.0.1.1578918.5.94.10.1.1.4.1.10 |
| evpnEviAutoRt The auto-derived route target for this EVPN instance.
Set to all zeros if EVPN does not have the information
required to derive the value. | column | EvpnRouteTarget | .1.2.826.0.1.1578918.5.94.10.1.1.4.1.11 |
| evpnEviEncapsulation Specifies the encapsulation type supported by the
EVPN instance. | column | EvpnEncapsulation | .1.2.826.0.1.1578918.5.94.10.1.1.4.1.12 |
| evpnEviLocalRouterAddressType The type of the local router address to advertise in EVPN
routes for this EVPN instance, or 'unknown' if there is no
associated IP address. | column | INET-ADDRESS-MIBInetAddressType | .1.2.826.0.1.1578918.5.94.10.1.1.4.1.13 |
| evpnEviLocalRouterAddress The local router address that is used as the BGP next hop
address for routes, and as the originating router address
in the NLRI of inclusive multicast EVPN routes.
… | column | OctetString | .1.2.826.0.1.1578918.5.94.10.1.1.4.1.14 |
| evpnEviAutoRtType Specifies the type of the auto-derived route target for
this EVPN instance.
If you do not wish to use auto-derived route targets, set
this field to 'none'. | column | EvpnRtUsageTc | .1.2.826.0.1.1578918.5.94.10.1.1.4.1.15 |
| evpnEviServiceType Specifies the service type of EVI | column | EvpnServiceType | .1.2.826.0.1.1578918.5.94.10.1.1.4.1.16 |
| evpnEviIndex Index identifying the EVPN instance. | column | EvpnIndex | .1.2.826.0.1.1578918.5.94.10.1.1.4.1.2 |
| evpnEviRowStatus Row status. Used to create and delete the configuration
for this EVPN instance. | column | SNMPv2-TCRowStatus | .1.2.826.0.1.1578918.5.94.10.1.1.4.1.3 |
| evpnEviAdminStatus The desired status of the EVPN instance.
Used to enable or disable the EVPN instance. | column | DC-MASTER-TCAdminStatus | .1.2.826.0.1.1578918.5.94.10.1.1.4.1.4 |
| evpnEviOperStatus Operational status of the EVPN instance. | column | DC-MASTER-TCBaseOperStatus | .1.2.826.0.1.1578918.5.94.10.1.1.4.1.5 |
| evpnEviOperReason The reason for the EVPN instance to be in its current oper
status, if the instance is not active or activating. | column | EvpnOperReason | .1.2.826.0.1.1578918.5.94.10.1.1.4.1.6 |
| evpnEviCfgRd Specifies the configured route distinguisher for the
EVPN instance. This is only used if evpnEviRdCfgOrAuto
is set to 'configured'. | column | EvpnRouteDistinguisher | .1.2.826.0.1.1578918.5.94.10.1.1.4.1.8 |
| evpnEviRd The route distinguisher in use for this EVPN instance.
This is set as follows.
- Set to the value of evpnEviCfgRd if
evpnEviRdCfgOrAuto is 'confi… | column | EvpnRouteDistinguisher | .1.2.826.0.1.1578918.5.94.10.1.1.4.1.9 |