evpnEviLocalRouterAddress

DC-EVPN-MIB · .1.2.826.0.1.1578918.5.94.10.1.1.4.1.14
MIB view Table view

Object

column r/w OctetString 
The local router address that is used as the BGP next hop
address for routes, and as the originating router address
in the NLRI of inclusive multicast EVPN routes.
              
If no local router address is configured, the BGP router
ID is used.

Context

MIB
DC-EVPN-MIB
OID
.1.2.826.0.1.1578918.5.94.10.1.1.4.1.14
Type
column
Access
readwrite
Status
current
Parent
evpnEviEntry
Table
evpnEviTable
Siblings
14

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-0 range: 4-4 range: 16-16

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
evpnEviRtCfgOrAuto
Specifies whether this EVPN instance uses configured or auto-derived route targets. Currently, only auto-derived route targets are supported, so the value must be s…
columnEvpnCfgOrAuto.1.2.826.0.1.1578918.5.94.10.1.1.4.1.10
evpnEviAutoRt
The auto-derived route target for this EVPN instance. Set to all zeros if EVPN does not have the information required to derive the value.
columnEvpnRouteTarget.1.2.826.0.1.1578918.5.94.10.1.1.4.1.11
evpnEviEncapsulation
Specifies the encapsulation type supported by the EVPN instance.
columnEvpnEncapsulation.1.2.826.0.1.1578918.5.94.10.1.1.4.1.12
evpnEviLocalRouterAddressType
The type of the local router address to advertise in EVPN routes for this EVPN instance, or 'unknown' if there is no associated IP address.
columnINET-ADDRESS-MIBInetAddressType.1.2.826.0.1.1578918.5.94.10.1.1.4.1.13
evpnEviAutoRtType
Specifies the type of the auto-derived route target for this EVPN instance. If you do not wish to use auto-derived route targets, set this field to 'none'.
columnEvpnRtUsageTc.1.2.826.0.1.1578918.5.94.10.1.1.4.1.15
evpnEviServiceType
Specifies the service type of EVI
columnEvpnServiceType.1.2.826.0.1.1578918.5.94.10.1.1.4.1.16
evpnEviIndex
Index identifying the EVPN instance.
columnEvpnIndex.1.2.826.0.1.1578918.5.94.10.1.1.4.1.2
evpnEviRowStatus
Row status. Used to create and delete the configuration for this EVPN instance.
columnSNMPv2-TCRowStatus.1.2.826.0.1.1578918.5.94.10.1.1.4.1.3
evpnEviAdminStatus
The desired status of the EVPN instance. Used to enable or disable the EVPN instance.
columnDC-MASTER-TCAdminStatus.1.2.826.0.1.1578918.5.94.10.1.1.4.1.4
evpnEviOperStatus
Operational status of the EVPN instance.
columnDC-MASTER-TCBaseOperStatus.1.2.826.0.1.1578918.5.94.10.1.1.4.1.5
evpnEviOperReason
The reason for the EVPN instance to be in its current oper status, if the instance is not active or activating.
columnEvpnOperReason.1.2.826.0.1.1578918.5.94.10.1.1.4.1.6
evpnEviRdCfgOrAuto
Specifies whether this EVPN instance uses a configured or auto-derived route distiguisher.
columnEvpnCfgOrAuto.1.2.826.0.1.1578918.5.94.10.1.1.4.1.7
evpnEviCfgRd
Specifies the configured route distinguisher for the EVPN instance. This is only used if evpnEviRdCfgOrAuto is set to 'configured'.
columnEvpnRouteDistinguisher.1.2.826.0.1.1578918.5.94.10.1.1.4.1.8
evpnEviRd
The route distinguisher in use for this EVPN instance. This is set as follows. - Set to the value of evpnEviCfgRd if evpnEviRdCfgOrAuto is 'confi…
columnEvpnRouteDistinguisher.1.2.826.0.1.1578918.5.94.10.1.1.4.1.9