evpnEsTnnlEndptAddr
DC-EVPN-MIB ·
.1.2.826.0.1.1578918.5.94.10.1.1.9.1.13
Object
column
r/w
OctetString
Tunnel endpoint address to use in EVPN routes for this ES.
Specify a value if you need remote PEs to send unicast
traffic destined for this Ethernet Segment using a
different tunnel.
Context
- MIB
- DC-EVPN-MIB
- OID
.1.2.826.0.1.1578918.5.94.10.1.1.9.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- evpnEsEntry
- Table
- evpnEsTable
- Siblings
- 11
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-0
range: 4-4
range: 16-16
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| evpnEsRouteTarget The ES-Import Route Target for the Ethernet Segment.
For an ES that is multi-homed using MC-LAG or that
is configured to use a type 1 ESI, EVPN can
auto-generate th… | column | EvpnRouteTarget | .1.2.826.0.1.1578918.5.94.10.1.1.9.1.10 |
| evpnEsDfElectionWaitTime Time to wait after advertising the Ethernet Segment
before running the designated forwarder election. | column | seconds Unsigned32 | .1.2.826.0.1.1578918.5.94.10.1.1.9.1.11 |
| evpnEsTnnlEndptAddrType Type of tunnel endpoint address to advertise in EVPN
routes for this ES, or 'unknown' if there is no associated
IP address. | column | INET-ADDRESS-MIBInetAddressType | .1.2.826.0.1.1578918.5.94.10.1.1.9.1.12 |
| evpnEsIfIndex Interface index of the Ethernet Segment.
Note that this is the interface index of the physical
interface or bundle interface for the link to the
multi-homed CE. Th… | column | IF-MIBInterfaceIndex | .1.2.826.0.1.1578918.5.94.10.1.1.9.1.2 |
| evpnEsRowStatus Row status. Used to create and delete the configuration
for this Ethernet Segment. | column | SNMPv2-TCRowStatus | .1.2.826.0.1.1578918.5.94.10.1.1.9.1.3 |
| evpnEsAdminStatus The desired status of the Ethernet Segment configuration. | column | DC-MASTER-TCAdminStatus | .1.2.826.0.1.1578918.5.94.10.1.1.9.1.4 |
| evpnEsOperStatus Operational status of the Ethernet Segment configuration.
A value of 'up' indicates only that the configuration is
enabled and consistent. The status of the Ethern… | column | DC-MASTER-TCBaseOperStatus | .1.2.826.0.1.1578918.5.94.10.1.1.9.1.5 |
| evpnEsOperReason The reason for the Ethernet Segment to be in its current
oper status, if the instance is not active or activating. | column | EvpnOperReason | .1.2.826.0.1.1578918.5.94.10.1.1.9.1.6 |
| evpnEsIdentifier Configured Ethernet Segment Identifier (ESI), or
all zeros if no Ethernet Segment Identifier is
configured.
For an ES multi-homed using MC-LAG, EVPN can
auto-genera… | column | EvpnESI | .1.2.826.0.1.1578918.5.94.10.1.1.9.1.7 |
| evpnEsMode Type of multi-homing for the Ethernet Segment.
- A value of singleHomed forces EVPN to treat this
Ethernet Segment as single homed.
- A value of… | column | EvpnEsModeTc | .1.2.826.0.1.1578918.5.94.10.1.1.9.1.8 |
| evpnEsRouteDistinguisher The configured route distinguisher to use when advertising
the Ethernet Segment route. This can be used to over-ride the
default value, which is based on the BGP router ID. | column | EvpnRouteDistinguisher | .1.2.826.0.1.1578918.5.94.10.1.1.9.1.9 |