evpnEsIfIndex

DC-EVPN-MIB · .1.2.826.0.1.1578918.5.94.10.1.1.9.1.2
MIB view Table view

Object

column IF-MIBInterfaceIndex 
Interface index of the Ethernet Segment.
              
Note that this is the interface index of the physical
interface or bundle interface for the link to the
multi-homed CE.  This is not necessarily the same
interface used for attachment circuits, which may be
VLAN sub-interfaces of this interface.

Context

MIB
DC-EVPN-MIB
OID
.1.2.826.0.1.1578918.5.94.10.1.1.9.1.2
Type
column
Access
noaccess
Status
current
Parent
evpnEsEntry
Table
evpnEsTable
Siblings
11

Syntax

IF-MIBInterfaceIndex
Source
IF-MIBInterfaceIndex
Base type
Integer32

Values & Constraints

Type Constraints
range: 1..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
evpnEsRouteTarget
The ES-Import Route Target for the Ethernet Segment. For an ES that is multi-homed using MC-LAG or that is configured to use a type 1 ESI, EVPN can auto-generate th…
columnEvpnRouteTarget.1.2.826.0.1.1578918.5.94.10.1.1.9.1.10
evpnEsDfElectionWaitTime
Time to wait after advertising the Ethernet Segment before running the designated forwarder election.
columnseconds Unsigned32.1.2.826.0.1.1578918.5.94.10.1.1.9.1.11
evpnEsTnnlEndptAddrType
Type of tunnel endpoint address to advertise in EVPN routes for this ES, or 'unknown' if there is no associated IP address.
columnINET-ADDRESS-MIBInetAddressType.1.2.826.0.1.1578918.5.94.10.1.1.9.1.12
evpnEsTnnlEndptAddr
Tunnel endpoint address to use in EVPN routes for this ES. Specify a value if you need remote PEs to send unicast traffic destined for this Ethernet Segment using a…
columnOctetString.1.2.826.0.1.1578918.5.94.10.1.1.9.1.13
evpnEsRowStatus
Row status. Used to create and delete the configuration for this Ethernet Segment.
columnSNMPv2-TCRowStatus.1.2.826.0.1.1578918.5.94.10.1.1.9.1.3
evpnEsAdminStatus
The desired status of the Ethernet Segment configuration.
columnDC-MASTER-TCAdminStatus.1.2.826.0.1.1578918.5.94.10.1.1.9.1.4
evpnEsOperStatus
Operational status of the Ethernet Segment configuration. A value of 'up' indicates only that the configuration is enabled and consistent. The status of the Ethern…
columnDC-MASTER-TCBaseOperStatus.1.2.826.0.1.1578918.5.94.10.1.1.9.1.5
evpnEsOperReason
The reason for the Ethernet Segment to be in its current oper status, if the instance is not active or activating.
columnEvpnOperReason.1.2.826.0.1.1578918.5.94.10.1.1.9.1.6
evpnEsIdentifier
Configured Ethernet Segment Identifier (ESI), or all zeros if no Ethernet Segment Identifier is configured. For an ES multi-homed using MC-LAG, EVPN can auto-genera…
columnEvpnESI.1.2.826.0.1.1578918.5.94.10.1.1.9.1.7
evpnEsMode
Type of multi-homing for the Ethernet Segment. - A value of singleHomed forces EVPN to treat this Ethernet Segment as single homed. - A value of…
columnEvpnEsModeTc.1.2.826.0.1.1578918.5.94.10.1.1.9.1.8
evpnEsRouteDistinguisher
The configured route distinguisher to use when advertising the Ethernet Segment route. This can be used to over-ride the default value, which is based on the BGP router ID.
columnEvpnRouteDistinguisher.1.2.826.0.1.1578918.5.94.10.1.1.9.1.9