evpnEntVxlanAddr
DC-EVPN-MIB ·
.1.2.826.0.1.1578918.5.94.10.1.1.1.1.30
Object
The TVI P2MP Router Address that is used for creating, ptvi dynamic tunnel interface. This address must be either of type IPv4 or IPv6, as specified by the evpnVxlanAddrType. It is used as the BGP next hop address for routes, and must therefore be an address which is reachable in the provider network. This field can only be changed when the Admin Status is down.
Context
- MIB
- DC-EVPN-MIB
- OID
.1.2.826.0.1.1578918.5.94.10.1.1.1.1.30- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- evpnEntEntry
- Table
- evpnEntTable
- Siblings
- 29
Syntax
INET-ADDRESS-MIBInetAddress
- Source
- INET-ADDRESS-MIBInetAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| evpnEntEntityIndex Identifies a DC-EVPN entity. | column | SNMPv2-SMIUnsigned32 | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.1 |
| evpnEntRpiBufferPoolSize The size of the RPI buffer pool.
This determines the maximum number of buffers that can
exist at once for the RPI pool. DC-EVPN Manager does not
use pre-allocated … | column | Integer32 | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.10 |
| evpnEntBdpiBufferPoolSize The size of the BDPI buffer pool.
This determines the maximum number of buffers that can
exist at once for the BDPI pool. DC-EVPN Manager does
not use pre-allocate… | column | Integer32 | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.11 |
| evpnEntMaiBufferPoolSize The size of the MAI buffer pool.
This determines the maximum number of buffers that can
exist at once for the MAI pool. DC-EVPN Manager does
not use pre-allocated … | column | Integer32 | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.12 |
| evpnEntRetryInterval The retry interval for resource failures that are retried
on a timer.
This field is not suitable for network administrators.
This field cannot be changed after init… | column | SNMPv2-SMITimeTicks | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.13 |
| evpnEntMacMoveLimit The limit on the number of MAC mobility events for a given
MAC address before a duplicate MAC error is detected.
When DC-EVPN Manager detects a MAC mobility event v… | column | Integer32 | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.14 |
| evpnEntMacMoveDuration The duration of the timer to start when a MAC mobility
event is detected via local learning. See
evpnEntMacMoveLimit for a description of how this timer is
used. | column | seconds Integer32 | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.15 |
| evpnEntTpiBufferPoolSize The size of the TPI buffer pool.
This determines the maximum number of buffers that can
exist at once for the TPI pool. DC-EVPN Manager does
not use pre-allocated … | column | Integer32 | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.16 |
| evpnEntLocalRouterAddressType The type of the local router address to advertise in EVPN
routes, or 'unknown' if there is no associated IP address. | column | INET-ADDRESS-MIBInetAddressType | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.17 |
| evpnEntLocalRouterAddress The local router address that is used as the BGP next hop
address for routes, and as the originating router address
in the NLRI of inclusive multicast EVPN routes.
… | column | OctetString | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.18 |
| evpnEntMacWithdrawDelay The time between DC-EVPN receiving a withdrawal for a MAC
and deleting the dataplane programming for that MAC
address.
This allows DC-EVPN to maintain connectivity … | column | seconds Integer32 | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.19 |
| evpnEntRowStatus The row status for this DC-EVPN Entity Table entry,
used to create and destroy table entries. | column | SNMPv2-TCRowStatus | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.2 |
| evpnEntLabelAllocType The type of label allocation to use for EVPN/MPLS.
Note that the value used typically depends on data plane
support, so this field is expected to be determined as
p… | column | EvpnLabelAllocType | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.20 |
| evpnEntPriBufferPoolSize The size of the PRI buffer pool.
This determines the maximum number of buffers that can
exist at once for the PRI pool. DC-EVPN Manager does
not use pre-allocated … | column | Integer32 | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.21 |
| evpnEntUseHal Indicates whether DC-EVPN is being used in a system
integrated with DC-PSM and other HAL components.
When set to 'true', DC-EVPN will use the PRI join instead
of th… | column | SNMPv2-TCTruthValue | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.22 |
| evpnEntAfmBufferPoolSize The size of the AFM buffer pool.
This determines the maximum number of buffers that can
exist at once for the AFM pool. DC-EVPN Manager does
not use pre-allocated … | column | Integer32 | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.23 |
| evpnEntBdiiBufferPoolSize The size of the BDII buffer pool.
This determines the maximum number of buffers that can
exist at once for the BDII pool. DC-EVPN Manager does
not use pre-allocate… | column | Integer32 | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.24 |
| evpnEntPartialRt Indicates whether EVPN will allow partial route target
matching against auto-derived route targets.
Enabling this allows auto-derived route targets to be used
in EBGP topologies. | column | SNMPv2-TCTruthValue | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.25 |
| evpnEntTenantId This value describes org id. | column | SNMPv2-SMIUnsigned32 | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.26 |
| evpnEntRtiName This value describes routing instance name. This value
is passed, while configuring the routing instance. | column | OctetString | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.27 |
| evpnEntEnableAlarms This field is used to enable alarms. | column | SNMPv2-TCTruthValue | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.28 |
| evpnEntVxlanAddrType The address type of the evpnEntVxlanAddr.
This field can only be changed when the Admin Status is
down. | column | INET-ADDRESS-MIBInetAddressType | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.29 |
| evpnEntAdminStatus The administrative status of this DC-EVPN entity,
used to activate and deactivate DC-EVPN. | column | DC-MASTER-TCAdminStatus | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.3 |
| evpnEntOperStatus The current operational status of this DC-EVPN entity. | column | DC-MASTER-TCBaseOperStatus | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.4 |
| evpnEntNbasePriority N-BASE priority for this DC-EVPN Manager entity.
When multiple N-BASE processes have IPSs queued, then the
supplied N-BASE scheduler prioritizes them according to
t… | column | Integer32 | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.5 |
| evpnEntTimerGranularity Clustered timer granularity for this DC-EVPN Manager
entity.
Increasing this value reduces the accuracy of clustered
timers, but might reduce the number of OS timer… | column | Integer32 | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.6 |
| evpnEntRestartDuration The length of the audit period for the BDPI join after the
entity activates.
After a restart, bridge domain information is kept
programmed until the end of the audi… | column | SNMPv2-SMITimeTicks | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.7 |
| evpnEntRescheduleLimit The maximum number of different objects that can be
processed in a single schedule.
When subcomponents are scheduled by receipt of an IPS or a
timer pop, that IPS c… | column | Integer32 | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.8 |
| evpnEntLdbiBufferPoolSize The size of the LDBI buffer pool.
This determines the maximum number of buffers that can
exist at once for the LDBI pool. DC-EVPN Manager does
not use pre-allocate… | column | Integer32 | .1.2.826.0.1.1578918.5.94.10.1.1.1.1.9 |