frxT1InOctets
Cisco90Series-MIB ·
.1.3.6.1.4.1.1570.1.6.1.1.9
Object
Number of octets received from the network directed at this subscriber port
Context
- MIB
- Cisco90Series-MIB
- OID
.1.3.6.1.4.1.1570.1.6.1.1.9- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- frxPortEntry
- Table
- frxPortTable
- Siblings
- 19
Syntax
RFC1155-SMICounter
- Source
- RFC1155-SMICounter
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| frxPortSpeed mandatory This is the speed that the channel unit port runs at.
1=56kbps 2=64kbps 3=128kbps 4=144kbps
This parameter can only be changed if frxConfigSrc is
set to SNMP. | column | Enumeration | .1.3.6.1.4.1.1570.1.6.1.1.1 |
| frxT1OutOctets mandatory Number of octets transmitted to the network
from this subscriber port | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.1.1.10 |
| frxDSLBadFrames mandatory Total number of frames received from this subscriber port
that were discarded. Possible reasons for discard are:
Frame contained HDLC abort (7 or more ones in a row)
Frame h… | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.1.1.11 |
| frxDSLHDLCEs mandatory Subscriber port Errored Seconds caused by HDLC aborts
(7 or more ones in a row). Total number of seconds in
which a frame with an HDLC abort is received from this
port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.1.1.12 |
| frxDSLCRCEs mandatory Subscriber port Errored Seconds caused by CRC errors.
Total number of seconds in which a frame with a CRC
error is received from this port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.1.1.13 |
| frxDSLLinkEs mandatory Subscriber port Errored Seconds caused by Non-integral
Bytes. Total number of seconds in which a frame with a
non-integral number of bytes is received from this
port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.1.1.14 |
| frxDSLFrShEs mandatory Subscriber port Errored Seconds caused by Short Frames.
received Total number of seconds in which a frame that
is too short (less than 5 bytes) is received from this
port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.1.1.15 |
| frxDSLFrLgEs mandatory Subscriber port Errored Seconds caused by Long Frames
received. Total number of seconds in which a frame that
is too long (more than 8192 bytes) is received from this
port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.1.1.16 |
| frxDSLDLCIEs mandatory Subscriber port Errored Seconds caused by illegal DLCI.
Total number of seconds in which a frame that has a DLCI
other than 16 to 23 (or 0) is received from this port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.1.1.17 |
| frxTxBuf mandatory Number of octets in the transmit buffer for this
subscriber port. This data is waiting to be sent
to the network (T1). | column | Integer32 | .1.3.6.1.4.1.1570.1.6.1.1.18 |
| frxRxBuf mandatory Number of octets in the receive buffer for this
subscriber port. This data is from the network (T1)
and is waiting to be sent to the subscriber port. | column | Integer32 | .1.3.6.1.4.1.1570.1.6.1.1.19 |
| frxPortProtocol mandatory This parameter controls what protocol the channel
unit should expect the subscriber to send on the port.
1=Port uses Frame Relay protocol - no encapsulation
2=Port uses PPP pr… | column | Enumeration | .1.3.6.1.4.1.1570.1.6.1.1.2 |
| frxPortNetEs mandatory Total number of seconds in which a frame received
from the network (T1) and targeted at this subscriber
port was discarded. | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.1.1.20 |
| frxDSLStatus mandatory This is the status of the DSL loop to the subscriber.
1=Loop is down.
2=Frx card has achieved physical layer activation with
the first BRITE card or the NT1 if there are no BRIT… | column | Enumeration | .1.3.6.1.4.1.1570.1.6.1.1.3 |
| frxPVCAssigned mandatory Number of PVCs assigned to Subscriber Port as determined
by Annex-D | column | Integer32 | .1.3.6.1.4.1.1570.1.6.1.1.4 |
| frxLastChange mandatory Time since DSL went in sync or lost sync in 0.01
second increments. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.1570.1.6.1.1.5 |
| frxBrite mandatory Number of BRITE cards downstream. BRITE cards are used
to extend the loop over subscriber loop carrier systems
and are detected via a background polling operation. | column | Integer32 | .1.3.6.1.4.1.1570.1.6.1.1.6 |
| frxDSLInOctets mandatory Number of octets received from the subscriber DSL
Does not include Annex-D octets | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.1.1.7 |
| frxDSLOutOctets mandatory Number of octets transmitted to the subscriber DSL.
Does not include Annex-D octets | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.1.1.8 |