frxRxBuf
Cisco90Series-MIB ·
.1.3.6.1.4.1.1570.1.6.1.1.19
Object
column
mandatory
Integer32
Number of octets in the receive buffer for this subscriber port. This data is from the network (T1) and is waiting to be sent to the subscriber port.
Context
- MIB
- Cisco90Series-MIB
- OID
.1.3.6.1.4.1.1570.1.6.1.1.19- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- frxPortEntry
- Table
- frxPortTable
- Siblings
- 19
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| frxPortSpeed mandatory This is the speed that the channel unit port runs at.
1=56kbps 2=64kbps 3=128kbps 4=144kbps
This parameter can only be changed if frxConfigSrc is
set to SNMP. | column | Enumeration | .1.3.6.1.4.1.1570.1.6.1.1.1 |
| frxT1OutOctets mandatory Number of octets transmitted to the network
from this subscriber port | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.1.1.10 |
| frxDSLBadFrames mandatory Total number of frames received from this subscriber port
that were discarded. Possible reasons for discard are:
Frame contained HDLC abort (7 or more ones in a row)
Frame h… | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.1.1.11 |
| frxDSLHDLCEs mandatory Subscriber port Errored Seconds caused by HDLC aborts
(7 or more ones in a row). Total number of seconds in
which a frame with an HDLC abort is received from this
port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.1.1.12 |
| frxDSLCRCEs mandatory Subscriber port Errored Seconds caused by CRC errors.
Total number of seconds in which a frame with a CRC
error is received from this port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.1.1.13 |
| frxDSLLinkEs mandatory Subscriber port Errored Seconds caused by Non-integral
Bytes. Total number of seconds in which a frame with a
non-integral number of bytes is received from this
port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.1.1.14 |
| frxDSLFrShEs mandatory Subscriber port Errored Seconds caused by Short Frames.
received Total number of seconds in which a frame that
is too short (less than 5 bytes) is received from this
port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.1.1.15 |
| frxDSLFrLgEs mandatory Subscriber port Errored Seconds caused by Long Frames
received. Total number of seconds in which a frame that
is too long (more than 8192 bytes) is received from this
port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.1.1.16 |
| frxDSLDLCIEs mandatory Subscriber port Errored Seconds caused by illegal DLCI.
Total number of seconds in which a frame that has a DLCI
other than 16 to 23 (or 0) is received from this port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.1.1.17 |
| frxTxBuf mandatory Number of octets in the transmit buffer for this
subscriber port. This data is waiting to be sent
to the network (T1). | column | Integer32 | .1.3.6.1.4.1.1570.1.6.1.1.18 |
| frxPortProtocol mandatory This parameter controls what protocol the channel
unit should expect the subscriber to send on the port.
1=Port uses Frame Relay protocol - no encapsulation
2=Port uses PPP pr… | column | Enumeration | .1.3.6.1.4.1.1570.1.6.1.1.2 |
| frxPortNetEs mandatory Total number of seconds in which a frame received
from the network (T1) and targeted at this subscriber
port was discarded. | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.1.1.20 |
| frxDSLStatus mandatory This is the status of the DSL loop to the subscriber.
1=Loop is down.
2=Frx card has achieved physical layer activation with
the first BRITE card or the NT1 if there are no BRIT… | column | Enumeration | .1.3.6.1.4.1.1570.1.6.1.1.3 |
| frxPVCAssigned mandatory Number of PVCs assigned to Subscriber Port as determined
by Annex-D | column | Integer32 | .1.3.6.1.4.1.1570.1.6.1.1.4 |
| frxLastChange mandatory Time since DSL went in sync or lost sync in 0.01
second increments. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.1570.1.6.1.1.5 |
| frxBrite mandatory Number of BRITE cards downstream. BRITE cards are used
to extend the loop over subscriber loop carrier systems
and are detected via a background polling operation. | column | Integer32 | .1.3.6.1.4.1.1570.1.6.1.1.6 |
| frxDSLInOctets mandatory Number of octets received from the subscriber DSL
Does not include Annex-D octets | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.1.1.7 |
| frxDSLOutOctets mandatory Number of octets transmitted to the subscriber DSL.
Does not include Annex-D octets | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.1.1.8 |
| frxT1InOctets mandatory Number of octets received from the network
directed at this subscriber port | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.1.1.9 |