frxDSLStatus

Cisco90Series-MIB · .1.3.6.1.4.1.1570.1.6.1.1.3
MIB view Table view

Object

column mandatory Enumeration 
This is the status of the DSL loop to the subscriber.
1=Loop is down.
2=Frx card has achieved physical layer activation with
  the first BRITE card or the NT1 if there are no BRITE cards.
3=Link is up but Annex-D is still inactive.  The ACT bit has
  been exchanged with the NT1 indicating a clear channel path
  to the customer has been established. Ports running protocols
  (i.e. PPP) that do not support Annex-D will never be in this
  state.
4=Link is fully up.  Annex-D (if appropriate) is active.

Context

MIB
Cisco90Series-MIB
OID
.1.3.6.1.4.1.1570.1.6.1.1.3
Type
column
Access
readonly
Status
mandatory
Parent
frxPortEntry
Table
frxPortTable
Siblings
19

Syntax

Enumeration

Values & Constraints

Enumerated Values
1loopDown
2dslSyncOnly
3loopUpInactive
4loopUp

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
frxPortSpeed mandatory
This is the speed that the channel unit port runs at. 1=56kbps 2=64kbps 3=128kbps 4=144kbps This parameter can only be changed if frxConfigSrc is set to SNMP.
columnEnumeration.1.3.6.1.4.1.1570.1.6.1.1.1
frxT1OutOctets mandatory
Number of octets transmitted to the network from this subscriber port
columnRFC1155-SMICounter.1.3.6.1.4.1.1570.1.6.1.1.10
frxDSLBadFrames mandatory
Total number of frames received from this subscriber port that were discarded. Possible reasons for discard are: Frame contained HDLC abort (7 or more ones in a row) Frame h…
columnRFC1155-SMICounter.1.3.6.1.4.1.1570.1.6.1.1.11
frxDSLHDLCEs mandatory
Subscriber port Errored Seconds caused by HDLC aborts (7 or more ones in a row). Total number of seconds in which a frame with an HDLC abort is received from this port.
columnRFC1155-SMICounter.1.3.6.1.4.1.1570.1.6.1.1.12
frxDSLCRCEs mandatory
Subscriber port Errored Seconds caused by CRC errors. Total number of seconds in which a frame with a CRC error is received from this port.
columnRFC1155-SMICounter.1.3.6.1.4.1.1570.1.6.1.1.13
frxDSLLinkEs mandatory
Subscriber port Errored Seconds caused by Non-integral Bytes. Total number of seconds in which a frame with a non-integral number of bytes is received from this port.
columnRFC1155-SMICounter.1.3.6.1.4.1.1570.1.6.1.1.14
frxDSLFrShEs mandatory
Subscriber port Errored Seconds caused by Short Frames. received Total number of seconds in which a frame that is too short (less than 5 bytes) is received from this port.
columnRFC1155-SMICounter.1.3.6.1.4.1.1570.1.6.1.1.15
frxDSLFrLgEs mandatory
Subscriber port Errored Seconds caused by Long Frames received. Total number of seconds in which a frame that is too long (more than 8192 bytes) is received from this port.
columnRFC1155-SMICounter.1.3.6.1.4.1.1570.1.6.1.1.16
frxDSLDLCIEs mandatory
Subscriber port Errored Seconds caused by illegal DLCI. Total number of seconds in which a frame that has a DLCI other than 16 to 23 (or 0) is received from this port.
columnRFC1155-SMICounter.1.3.6.1.4.1.1570.1.6.1.1.17
frxTxBuf mandatory
Number of octets in the transmit buffer for this subscriber port. This data is waiting to be sent to the network (T1).
columnInteger32.1.3.6.1.4.1.1570.1.6.1.1.18
frxRxBuf mandatory
Number of octets in the receive buffer for this subscriber port. This data is from the network (T1) and is waiting to be sent to the subscriber port.
columnInteger32.1.3.6.1.4.1.1570.1.6.1.1.19
frxPortProtocol mandatory
This parameter controls what protocol the channel unit should expect the subscriber to send on the port. 1=Port uses Frame Relay protocol - no encapsulation 2=Port uses PPP pr…
columnEnumeration.1.3.6.1.4.1.1570.1.6.1.1.2
frxPortNetEs mandatory
Total number of seconds in which a frame received from the network (T1) and targeted at this subscriber port was discarded.
columnRFC1155-SMICounter.1.3.6.1.4.1.1570.1.6.1.1.20
frxPVCAssigned mandatory
Number of PVCs assigned to Subscriber Port as determined by Annex-D
columnInteger32.1.3.6.1.4.1.1570.1.6.1.1.4
frxLastChange mandatory
Time since DSL went in sync or lost sync in 0.01 second increments.
columnRFC1155-SMITimeTicks.1.3.6.1.4.1.1570.1.6.1.1.5
frxBrite mandatory
Number of BRITE cards downstream. BRITE cards are used to extend the loop over subscriber loop carrier systems and are detected via a background polling operation.
columnInteger32.1.3.6.1.4.1.1570.1.6.1.1.6
frxDSLInOctets mandatory
Number of octets received from the subscriber DSL Does not include Annex-D octets
columnRFC1155-SMICounter.1.3.6.1.4.1.1570.1.6.1.1.7
frxDSLOutOctets mandatory
Number of octets transmitted to the subscriber DSL. Does not include Annex-D octets
columnRFC1155-SMICounter.1.3.6.1.4.1.1570.1.6.1.1.8
frxT1InOctets mandatory
Number of octets received from the network directed at this subscriber port
columnRFC1155-SMICounter.1.3.6.1.4.1.1570.1.6.1.1.9