frxCircuitEntry
Cisco90Series-MIB ·
.1.3.6.1.4.1.1570.1.6.2.1
Object
row
mandatory
A specific entry in the Cisco 90 Series Circuit Table. There is one entry for each permanent virtual circuit in the system. There are no entries for unused banks or empty channel unit slots.
Context
- MIB
- Cisco90Series-MIB
- OID
.1.3.6.1.4.1.1570.1.6.2.1- Type
- row
- Status
- mandatory
- Parent
- frxCircuitTable
- Table
- frxCircuitTable
- Children
- 10
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| frxPvcIndex mandatory This index is the subscriber loop DLCI number of the
permanent virtual circuit. It ranges from 16 to 23.
The corresponding network side DLCI must be assigned
in the frame relay sw… | column | Integer32 | .1.3.6.1.4.1.1570.1.6.2.1.1 |
| frxCktDiscards mandatory The number of input frames from the subscriber port
on the addressed permanent virtual circuit that were
discarded due to congestion (lack of buffer space or
congestion control. | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.2.1.10 |
| frxCktCIR mandatory This is the committed information rate (CIR) in bits
per second for the addressed permanent virtual circuit.
(Typical value 1536000/#ports). | column | Integer32 | .1.3.6.1.4.1.1570.1.6.2.1.2 |
| frxCktBc mandatory This is the Committed Burst Size (Bc) in bits for the
addressed permanent virtual circuit. The time interval
over which the burst is measured is Bc/CIR. (Typically
set to same num… | column | Integer32 | .1.3.6.1.4.1.1570.1.6.2.1.3 |
| frxCktBe mandatory This is the Excess Burst Size (Be) in bits for the
addressed permanent virtual circuit. The time interval
over which the excess burst is measured is Be/CIR.
(Typical value 1536000… | column | Integer32 | .1.3.6.1.4.1.1570.1.6.2.1.4 |
| frxFarEndOpStat mandatory This is the status of the far end of the frame relay
permanent virtual circuit (through the frame relay
network) as determined by Annex-D.
1=active
2=inactive | column | Enumeration | .1.3.6.1.4.1.1570.1.6.2.1.5 |
| frxCktInOctets mandatory The number of input octets from the subscriber port
on the addressed permanent virtual circuit. These
octets are destined for the network (T1). | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.2.1.6 |
| frxCktOutOctets mandatory The number of output octets to the subscriber port
on the addressed permanent virtual circuit. These
octets were received from the network (T1). | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.2.1.7 |
| frxCktInFrames mandatory The number of input frames from the subscriber port
on the addressed permanent virtual circuit. These
frames are destined for the network (T1). | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.2.1.8 |
| frxCktOutFrames mandatory The number of output frames to the subscriber port
on the addressed permanent virtual circuit. These
frames were received from the network (T1). | column | RFC1155-SMICounter | .1.3.6.1.4.1.1570.1.6.2.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| frxBankIndex mandatory Channel Bank Di-group Number. This index is used to address
the various channel banks in the system. This number is the
same as the DLCI number used to communicate with the bank a… | column | Integer32 | .1.3.6.1.4.1.1570.1.3.1.1.1 |
| frxChUIndex mandatory Channel Unit Number. This index is used to address a
specific channel unit in a bank. For D4 channel banks
this number is the same as the physical slot number 1-24 | column | Integer32 | .1.3.6.1.4.1.1570.1.4.1.1.1 |
| frxPortIndex mandatory Which subscriber port on the channel unit is
addressed. Ports are numbered from 0 to 3.
Some channel unit types have less than 4 ports. | column | Integer32 | .1.3.6.1.4.1.1570.1.5.2.1.1 |
| frxPvcIndex mandatory This index is the subscriber loop DLCI number of the
permanent virtual circuit. It ranges from 16 to 23.
The corresponding network side DLCI must be assigned
in the frame relay sw… | column | Integer32 | .1.3.6.1.4.1.1570.1.6.2.1.1 |