wanInterfaceEntryLexProtocolEnable
CTRON-WAN-MIB ·
.1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.10
Object
column
obsolete
r/w
Enumeration
This switch acts in concert with the wanInterfaceEntryProtocol object. To activate LEX, this object should first be set to enable (1), then set the wanInterfaceEntryProtocol to PPP. The enable will have no effect if PPP is not selected. If the wanInterfaceEntryProtocol is selected first, the default NCP of BNCP will be selected. To De-select LEX, you must set this object to disable (2), and wanInterfaceEntryProtocol to NONE or reset the device. Just selecting disable (2) will not tear down the connection.
Context
- MIB
- CTRON-WAN-MIB
- OID
.1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.10- Type
- column
- Access
- readwrite
- Status
- obsolete
- Parent
- wanInterfaceEntry
- Table
- wanInterfaceTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wanInterfaceConnectionIndex mandatory This value is the wan connection that this interface
exists on. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.1 |
| wanInterfaceEntryLexProtocolStatus obsolete This object reflects the current state of the link. The device
is said to be bound to the router when the physical link is OK,
the LEX negotiation is successful, and the router h… | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.11 |
| wanInterfaceEntryCompRatio mandatory The ratio of uncompressed to compressed transmitted data.
If the data compression status is off, 1:1 will be displayed | column | OctetString | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.12 |
| wanInterfaceEntryCompStatus mandatory On indicates that the compression has been successfully
negotiated and is operating. Off indicates that the
compression negotiation has failed and compression is not
operating at … | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.13 |
| wanInterfaceEntryBackUpIfEnable mandatory This object is used to select the Call-backup option.
A value of 1 is used to enable the option and a value of
2 to disable it. | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.14 |
| wanInterfacePhysPortIndex mandatory This value is the physical port of the wan connection
that this interface exists on. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.2 |
| wanInterfaceEntryIndex mandatory A unique value for each interface of this physical port.
It is a value between 1 and the number of interfaces that
exist for the current port. The number of interfaces for
each ty… | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.3 |
| wanInterfaceEntryIfIndex mandatory The ifIndex of the interface. This is the index of this entry
in the ifTable. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.4 |
| wanInterfaceEntryProtocol mandatory The protocol that should be run on this interface. Values
are equivalent to those defined for ifType in Mib-II.
Accepted values are product dependent. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.5 |
| wanInterfaceEntryCompression mandatory Indicates whether data compression should take
place on this interface. | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.6 |
| wanInterfaceEntryMTU mandatory The MTU to be negotiated for this interface. This will not
be updated with the actual MTU, which can be found in the
ifTable. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.7 |
| wanInterfaceEntryLineCoding mandatory This object describes the variety of Zero Code suppression
on this interface. For an interface on a Ds1 Port, the valid
values depend on the value of the Ds1ConfigLineCode object.… | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.8 |
| wanInterfaceEntryCrcLength mandatory The Length of the CRC for this interface. Not all platforms
will allow all options. | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.9 |