wanInterfaceEntryIndex
CTRON-WAN-MIB ·
.1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.3
Object
column
mandatory
Integer32
A unique value for each interface of this physical port. It is a value between 1 and the number of interfaces that exist for the current port. The number of interfaces for each type of port is: 24 for a port type (wanPhysPortType) of 't1', 30 for a port type of 'e1', and 1 for a port type of 'synchronous'. There will be no entries if the port type is 'none'.
Context
- MIB
- CTRON-WAN-MIB
- OID
.1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.3- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- wanInterfaceEntry
- Table
- wanInterfaceTable
- Siblings
- 13
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wanInterfaceConnectionIndex mandatory This value is the wan connection that this interface
exists on. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.1 |
| wanInterfaceEntryLexProtocolEnable obsolete This switch acts in concert with the wanInterfaceEntryProtocol
object. To activate LEX, this object should first be set to
enable (1), then set the wanInterfaceEntryProtocol to P… | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.10 |
| wanInterfaceEntryLexProtocolStatus obsolete This object reflects the current state of the link. The device
is said to be bound to the router when the physical link is OK,
the LEX negotiation is successful, and the router h… | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.11 |
| wanInterfaceEntryCompRatio mandatory The ratio of uncompressed to compressed transmitted data.
If the data compression status is off, 1:1 will be displayed | column | OctetString | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.12 |
| wanInterfaceEntryCompStatus mandatory On indicates that the compression has been successfully
negotiated and is operating. Off indicates that the
compression negotiation has failed and compression is not
operating at … | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.13 |
| wanInterfaceEntryBackUpIfEnable mandatory This object is used to select the Call-backup option.
A value of 1 is used to enable the option and a value of
2 to disable it. | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.14 |
| wanInterfacePhysPortIndex mandatory This value is the physical port of the wan connection
that this interface exists on. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.2 |
| wanInterfaceEntryIfIndex mandatory The ifIndex of the interface. This is the index of this entry
in the ifTable. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.4 |
| wanInterfaceEntryProtocol mandatory The protocol that should be run on this interface. Values
are equivalent to those defined for ifType in Mib-II.
Accepted values are product dependent. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.5 |
| wanInterfaceEntryCompression mandatory Indicates whether data compression should take
place on this interface. | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.6 |
| wanInterfaceEntryMTU mandatory The MTU to be negotiated for this interface. This will not
be updated with the actual MTU, which can be found in the
ifTable. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.7 |
| wanInterfaceEntryLineCoding mandatory This object describes the variety of Zero Code suppression
on this interface. For an interface on a Ds1 Port, the valid
values depend on the value of the Ds1ConfigLineCode object.… | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.8 |
| wanInterfaceEntryCrcLength mandatory The Length of the CRC for this interface. Not all platforms
will allow all options. | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.9 |