ds1AlarmBPVErrorRate
CTRON-WAN-MIB ·
.1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.7
Object
column
mandatory
r/w
Integer32
Used to specify the negative exponent of 10, used in monitoring Bipolar Violations (Code Violations for E1) over intervals defined by ds1AlarmBPVInterval. For example, for a ds1AlarmBPVErrorRate value of 6 used with a ds1AlarmBPVInterval of 15, an alarm is generated when a 15 minute period has an average error rate which exceeds 1 Bipolar Violation (Code Violation for E1) per million bits. For those devices that support ds1 alarm monitoring but who's hardware does not support detect bipolar violations, this object always returns the default, and performs no action when written.
Context
- MIB
- CTRON-WAN-MIB
- OID
.1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.7- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- ds1AlarmConfigEntry
- Table
- ds1AlarmConfigTable
- Siblings
- 8
Syntax
Integer32
Values & Constraints
Object Constraints
range: 5-9
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ds1PhysNum mandatory The value for this object is equal to the value
of a unique physical connection identifier associated
with this DS1 which is clearly labeled on the device.
For those products that… | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.1 |
| ds1AlarmAdmin mandatory Used to enable and disable the DS1 Alarm
Monitoring Application for this DS1 circuit. | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.2 |
| ds1AlarmAutoRecovery mandatory Used to enable and disable the DS1 Alarm
Automatic Recovery feature for this DS1 circuit.
For those devices that support ds1
alarm monitoring, but do not support the automatic
rec… | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.3 |
| ds1AlarmTrapEnable mandatory Used to enable and disable the DS1 Alarm
SNMP Trap generation feature for this DS1 circuit.
This object operates in conjunction with configuration
of objects in the ctron-trap-mi… | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.4 |
| ds1AlarmESCount mandatory Used in conjuction with ctDs1AlarmESInterval to set
the threshold for alarm generation when the number of
Errored Seconds for a specified time interval, measured
in minutes, is… | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.5 |
| ds1AlarmESInterval mandatory Used in conjuction with ctDs1AlarmESCount to set the
threshold for alarm generation when the number of
Errored Seconds for a specified time interval, measured
in minutes, is ex… | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.6 |
| ds1AlarmBPVInterval mandatory Used to specify the interval, used in
monitoring Bipolar Violations (Code Violations for E1)
with thresholds defined by ds1AlarmBPVErrorRate. For
example, for a ds1AlarmBPVError… | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.8 |
| ds1AlarmManualRecovery mandatory To cause a manual recovery to occur, this object is set
to a 1. It is always read as a 1. The recovery will
occur only when automatic recovery is disabled. | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.9 |