sfcsSysConfigUBR
CTRON-SFCS-MIB ·
.1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.20
Object
scalar
mandatory
r/w
Integer32
For the set operation: UBR_Cfg is set across all boards in the chassis (that are operational and manageable). For the get operation: UBR_Cfg setting is retrived from the current chassis manager only (one slot only). IF boards are introduced or re-introduced to the chassis their UBR value will be 0. In order to insure a required UBR_Cfg value the set operation should be proformed after slot insertions or re-insertions are completed to the chassis.
Context
- MIB
- CTRON-SFCS-MIB
- OID
.1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.20- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- sfcsSysConfigEnt
- Siblings
- 19
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sfcsSysConfigAdminStatus mandatory Sets the administrative state of the SFCS switching
services for this virtual switch. This controls the
SFCS state at a chassis level. Regardless of the
per-interface state of e… | scalar | Enumeration | .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.1 |
| sfcsSysConfigInterfaceCapability mandatory Indicates the total bandwidth capability(of the engine)
for this switch expressed in Mbps. | scalar | Integer32 | .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.10 |
| sfcsSysConfigTypeofSwitch mandatory Indicates what type of switch this is.
other(1)
sfcellswitch(2)
sfpacketswitch(3) | scalar | Enumeration | .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.11 |
| sfcsSysConfigPolicingSupport mandatory Indicates whether or not this switch supports policing.
supported(1)
not supported(2) | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.12 |
| sfcsSysConfigPnniNsapPrefix mandatory This is the 13 byte NSAP prefix to use
with address registration. | scalar | OctetString | .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.13 |
| sfcsSysConfigPnniNodeLevel mandatory This is the PNNI node level value.
The range can be from 0 to 104. | scalar | Integer32 | .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.14 |
| sfcsSysConfigPnniAddessingMode mandatory This is the PNNI addressing mode - that
can range from 0 to 2.
0 - Auto Mode using MAC
1 - Auto Mode using board#
2 - Manual | scalar | Integer32 | .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.15 |
| sfcsSysConfigPnniAddessingAdmnStatus mandatory This is the PNNI addressing admn status.
Down - 2. Up - 1. | scalar | Integer32 | .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.16 |
| sfcsSysConfigFMVer mandatory This is the Firmware Revision of the switch. | scalar | OctetString | .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.17 |
| sfcsSysConfigCTMSlotMask mandatory This is the slot mask for all ctm boards in the chassis.
The least significant bit represents slot 1. | scalar | Integer32 | .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.18 |
| sfcsSysConfigMaxfreecva mandatory This is the maximum number of CAC connection blocks that
CAC will allow on its free list. The default is 1024. If too low
CAC performance will degrade (thrashing control blocks), … | scalar | Integer32 | .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.19 |
| sfcsSysConfigOperStatus mandatory Indicates the current operating condition of this switch.
enabled(1) -- running
disabled(2) -- not running
other(3) -- none of the following
pending… | scalar | Enumeration | .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.2 |
| sfcsSysConfigOperTime mandatory Indicates the amount of time (# of time ticks) that
this switch system has been in its current operational
state. | scalar | RFC1155-SMITimeTicks | .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.3 |
| sfcsSysConfigLastChange mandatory Indicates the last time a change was made to the
configuration entry for this switch. | scalar | RFC1155-SMITimeTicks | .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.4 |
| sfcsSysConfigSwitchCapacity mandatory Indicates the maximum front panel bandwidth based on current
hardware configuration of the switch in Mbps | scalar | Integer32 | .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.5 |
| sfcsSysConfigMaxCnxEntries mandatory Indicates the maximum number of connections which
can be established on this switch. | scalar | Integer32 | .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.6 |
| sfcsSysConfigMaxStatEntries mandatory Indicates the maximum number of stats enabled VCs for this
switch. | scalar | Integer32 | .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.7 |
| sfcsSysConfigMaxUpcEntries mandatory Indicates the maximum number of UPC enabled VCs for this
switch. | scalar | Integer32 | .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.8 |
| sfcsSysConfigNumberANIMS mandatory Indicates the number of ATM Network Inteface Modules
currently configured on this switch. | scalar | Integer32 | .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.9 |