sfcsSysConfigAdminStatus

CTRON-SFCS-MIB · .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.1
MIB view Table view

Object

scalar mandatory r/w Enumeration 
Sets the administrative state of the SFCS switching
services for this virtual switch.  This controls the
SFCS state at a chassis level.  Regardless of the
per-interface state of each SFCS switching element
and the state of active connections, writing the value
disabled(2) will cause the entire switch to immediately
shutdown.
                enabled(1)    --  startup the SFCS
                disabled(2)   --  shutdown the SFCS
                other(3)      --  none of the following

Context

MIB
CTRON-SFCS-MIB
OID
.1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.1
Type
scalar
Access
readwrite
Status
mandatory
Parent
sfcsSysConfigEnt
Siblings
19

Syntax

Enumeration

Values & Constraints

Enumerated Values
1enabled
2disabled
3other

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
sfcsSysConfigInterfaceCapability mandatory
Indicates the total bandwidth capability(of the engine) for this switch expressed in Mbps.
scalarInteger32.1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.10
sfcsSysConfigTypeofSwitch mandatory
Indicates what type of switch this is. other(1) sfcellswitch(2) sfpacketswitch(3)
scalarEnumeration.1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.11
sfcsSysConfigPolicingSupport mandatory
Indicates whether or not this switch supports policing. supported(1) not supported(2)
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.12
sfcsSysConfigPnniNsapPrefix mandatory
This is the 13 byte NSAP prefix to use with address registration.
scalarOctetString.1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.13
sfcsSysConfigPnniNodeLevel mandatory
This is the PNNI node level value. The range can be from 0 to 104.
scalarInteger32.1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.14
sfcsSysConfigPnniAddessingMode mandatory
This is the PNNI addressing mode - that can range from 0 to 2. 0 - Auto Mode using MAC 1 - Auto Mode using board# 2 - Manual
scalarInteger32.1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.15
sfcsSysConfigPnniAddessingAdmnStatus mandatory
This is the PNNI addressing admn status. Down - 2. Up - 1.
scalarInteger32.1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.16
sfcsSysConfigFMVer mandatory
This is the Firmware Revision of the switch.
scalarOctetString.1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.17
sfcsSysConfigCTMSlotMask mandatory
This is the slot mask for all ctm boards in the chassis. The least significant bit represents slot 1.
scalarInteger32.1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.18
sfcsSysConfigMaxfreecva mandatory
This is the maximum number of CAC connection blocks that CAC will allow on its free list. The default is 1024. If too low CAC performance will degrade (thrashing control blocks), …
scalarInteger32.1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.19
sfcsSysConfigOperStatus mandatory
Indicates the current operating condition of this switch. enabled(1) -- running disabled(2) -- not running other(3) -- none of the following pending…
scalarEnumeration.1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.2
sfcsSysConfigUBR mandatory
For the set operation: UBR_Cfg is set across all boards in the chassis (that are operational and manageable). For the get operation: UBR_Cfg setting is retrived from the current…
scalarInteger32.1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.20
sfcsSysConfigOperTime mandatory
Indicates the amount of time (# of time ticks) that this switch system has been in its current operational state.
scalarRFC1155-SMITimeTicks.1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.3
sfcsSysConfigLastChange mandatory
Indicates the last time a change was made to the configuration entry for this switch.
scalarRFC1155-SMITimeTicks.1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.4
sfcsSysConfigSwitchCapacity mandatory
Indicates the maximum front panel bandwidth based on current hardware configuration of the switch in Mbps
scalarInteger32.1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.5
sfcsSysConfigMaxCnxEntries mandatory
Indicates the maximum number of connections which can be established on this switch.
scalarInteger32.1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.6
sfcsSysConfigMaxStatEntries mandatory
Indicates the maximum number of stats enabled VCs for this switch.
scalarInteger32.1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.7
sfcsSysConfigMaxUpcEntries mandatory
Indicates the maximum number of UPC enabled VCs for this switch.
scalarInteger32.1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.8
sfcsSysConfigNumberANIMS mandatory
Indicates the number of ATM Network Inteface Modules currently configured on this switch.
scalarInteger32.1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.9