ds1AlarmGlobalBPVErrorRate

CTRON-REMOTE-ACCESS-MIB · .1.3.6.1.4.1.52.4.1.2.7.2.8.1.6
MIB view Table view

Object

scalar mandatory r/w Integer32 
Used to specify the negative exponent of 10, used in
monitoring Bipolar Violations (Code Violations for E1)
over intervals defined by ds1AlarmGlobalBPVInterval.  
For example, for a ds1AlarmGlobalBPVErrorRate value 
of 6 used with a ds1AlarmGlobalBPVInterval of 15, 
an alarm is generated when a 15 minute period has an 
average error rate which exceeds 1 Bipolar Violation 
(Code Violation for E1) per million bits.
For those devices that support ds1 alarm monitoring
but who's hardware does not support detect bipolar
violations, this object always returns the default,
and performs no action when written.

Context

MIB
CTRON-REMOTE-ACCESS-MIB
OID
.1.3.6.1.4.1.52.4.1.2.7.2.8.1.6
Type
scalar
Access
readwrite
Status
mandatory
Parent
ds1AlarmsGlobalConfigGroup
Siblings
7

Syntax

Integer32

Values & Constraints

Object Constraints
range: 5-9

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ds1AlarmGlobalAdmin mandatory
Used to enable and disable the DS1 Alarm Monitoring Application for all DS1 circuits on the device.
scalarEnumeration.1.3.6.1.4.1.52.4.1.2.7.2.8.1.1
ds1AlarmGlobalAutoRecovery mandatory
Used to enable and disable the DS1 Alarm Automatic Recovery feature for all DS1 circuits on the device. For those devices that support ds1 alarm monitoring, but do not support th…
scalarEnumeration.1.3.6.1.4.1.52.4.1.2.7.2.8.1.2
ds1AlarmGlobalTrapEnable mandatory
Used to enable and disable the DS1 Alarm SNMP Trap generation feature for all DS1 circuits on the device. This object operates in conjunction with configuration of objects in t…
scalarEnumeration.1.3.6.1.4.1.52.4.1.2.7.2.8.1.3
ds1AlarmGlobalESCount mandatory
Used in conjuction with ctDs1AlarmESInterval to set the threshold for alarm generation when the number of Errored Seconds for a specified time interval, measured in minutes, is…
scalarInteger32.1.3.6.1.4.1.52.4.1.2.7.2.8.1.4
ds1AlarmGlobalESInterval mandatory
Used in conjuction with ds1AlarmGlobalESCount to set the threshold for alarm generation when the number of Errored Seconds for a specified time interval, measured in minutes, i…
scalarInteger32.1.3.6.1.4.1.52.4.1.2.7.2.8.1.5
ds1AlarmGlobalBPVInterval mandatory
Used to specify the interval, used in monitoring Bipolar Violations (Code Violations for E1) with thresholds defined by ds1AlarmGlobalBPVErrorRate. For example, for a ds1AlarmGlo…
scalarInteger32.1.3.6.1.4.1.52.4.1.2.7.2.8.1.7
ds1AlarmGlobalManualRecovery mandatory
To cause a manual recovery to occur on all Ds1 circuits, this object is set to a 1. It is always read as a 1. The recovery will occur only when automatic recovery is disabled.
scalarEnumeration.1.3.6.1.4.1.52.4.1.2.7.2.8.1.8