fa4e1et100RmonFunctionLocal
CTC-FRM220-MIB ·
.1.3.6.1.4.1.4756.20.430.20.1.83
Object
column
r/w
Enumeration
iMux4(T/S) Series RMON function : 0:Disable 1:Enable
Context
- MIB
- CTC-FRM220-MIB
- OID
.1.3.6.1.4.1.4756.20.430.20.1.83- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- f4E1LocalEntry
- Table
- f4E1LocalTable
- Siblings
- 134
Syntax
Enumeration
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fa4e1et100ChassisIndexLocal A unique value for each card.
It starts from 0 to 9 contiguously. | column | Integer32 | .1.3.6.1.4.1.4756.20.430.20.1.1 |
| fa4e1et100SetToDefaultLocal iMux4(T/S) Series card port set to default:
0:Off
1:Trigger | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.10 |
| fa4e1et100DDTxPowerLocal iMux4(T/S) Series card, Tx power of D/D information. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.430.20.1.100 |
| fa4e1et100DDRxPowerLocal iMux4(T/S) Series card, Rx power of D/D information. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.430.20.1.101 |
| fa4e1et100DDTempLocal iMux4(T/S) Series card, Temperature of D/D information in degree C. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.430.20.1.102 |
| fa4e1et100DDBiasLocal iMux4(T/S) Series card, BIAS of D/D information. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.430.20.1.103 |
| fa4e1et100DDVoltageLocal iMux4(T/S) Series card, Voltage of D/D information. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.430.20.1.104 |
| fa4e1et100ChannelDefectLocal iMux4(T/S) Series card Channel Defect:
0:Disable
4:1E-4
6:1E-6 | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.105 |
| fa4e1et100LoopDetectionLocal iMux4(T/S) Series card Loop Detection:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.106 |
| fa4e1et100LoopCh1Local iMux4(T/S) Series card E1 channel 1 Loop Check State:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.107 |
| fa4e1et100LoopCh2Local iMux4(T/S) Series card E1 channel 2 Loop Check State:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.108 |
| fa4e1et100LoopCh3Local iMux4(T/S) Series card E1 channel 3 Loop Check State:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.109 |
| fa4e1et100E1Ch1SingalLocal iMux4(T/S) Series card E1 channel 1 signal status:
0:Singal Loss
1:Normal | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.11 |
| fa4e1et100LoopCh4Local iMux4(T/S) Series card E1 channel 4 Loop Check State:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.110 |
| fa4e1et100DefectCh1Local iMux4(T/S) Series card E1 channel 1 Defect Status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.111 |
| fa4e1et100DefectCh2Local iMux4(T/S) Series card E1 channel 2 Defect Status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.112 |
| fa4e1et100DefectCh3Local iMux4(T/S) Series card E1 channel 3 Defect Status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.113 |
| fa4e1et100DefectCh4Local iMux4(T/S) Series card E1 channel 4 Defect Status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.114 |
| fa4e1et100FxSignalLocal iMux4(T/S) Series card Fiber signal detect(SD):
0:Fiber unplugged
1:Signal detected | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.115 |
| fa4e1et100PortResetLocal iMux4(T/S) Series card Port Reset:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.116 |
| fa4e1et100VLANModeLocal iMux4(T/S) Series card VLAN mode:
0:MODE2
1:MODE1 | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.117 |
| fa4e1et100ETagSelectEntryLocal iMux4(T/S) Series card ETag select entry: | column | Integer32 | .1.3.6.1.4.1.4756.20.430.20.1.118 |
| fa4e1et100ETagMethodLocal iMux4(T/S) Series card ETag Method:
0: Intouch
1: Add Tag
2: Remove Tag | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.119 |
| fa4e1et100E1Ch2SingalLocal iMux4(T/S) Series card E1 channel 2 signal status:
0:Singal Loss
1:Normal | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.12 |
| fa4e1et100VLANTableVID1Local iMux4(T/S) Series card VLAN Table:
VLAN ID1 | column | Integer32 | .1.3.6.1.4.1.4756.20.430.20.1.120 |
| fa4e1et100VLANTableVID2Local iMux4(T/S) Series card VLAN Table:
VLAN ID2 | column | Integer32 | .1.3.6.1.4.1.4756.20.430.20.1.121 |
| fa4e1et100VLANTableVID3Local iMux4(T/S) Series card VLAN Table:
VLAN ID3 | column | Integer32 | .1.3.6.1.4.1.4756.20.430.20.1.122 |
| fa4e1et100VLANTableVID4Local iMux4(T/S) Series card VLAN Table:
VLAN ID4 | column | Integer32 | .1.3.6.1.4.1.4756.20.430.20.1.123 |
| fa4e1et100VLANTableVID5Local iMux4(T/S) Series card VLAN Table:
VLAN ID5 | column | Integer32 | .1.3.6.1.4.1.4756.20.430.20.1.124 |
| fa4e1et100VLANTableVID6Local iMux4(T/S) Series card VLAN Table:
VLAN ID6 | column | Integer32 | .1.3.6.1.4.1.4756.20.430.20.1.125 |
| fa4e1et100VLANTableVID7Local iMux4(T/S) Series card VLAN Table:
VLAN ID7 | column | Integer32 | .1.3.6.1.4.1.4756.20.430.20.1.126 |
| fa4e1et100VLANTableVID8Local iMux4(T/S) Series card VLAN Table:
VLAN ID8 | column | Integer32 | .1.3.6.1.4.1.4756.20.430.20.1.127 |
| fa4e1et100VLANTableVID9Local iMux4(T/S) Series card VLAN Table:
VLAN ID9 | column | Integer32 | .1.3.6.1.4.1.4756.20.430.20.1.128 |
| fa4e1et100VLANTableVID10Local iMux4(T/S) Series card VLAN Table:
VLAN ID10 | column | Integer32 | .1.3.6.1.4.1.4756.20.430.20.1.129 |
| fa4e1et100E1Ch3SingalLocal iMux4(T/S) Series card E1 channel 3 signal status:
0:Singal Loss
1:Normal | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.13 |
| fa4e1et100VLANTableVID11Local iMux4(T/S) Series card VLAN Table:
VLAN ID11 | column | Integer32 | .1.3.6.1.4.1.4756.20.430.20.1.130 |
| fa4e1et100VLANTableVID12Local iMux4(T/S) Series card VLAN Table:
VLAN ID12 | column | Integer32 | .1.3.6.1.4.1.4756.20.430.20.1.131 |
| fa4e1et100VLANTableVID13Local iMux4(T/S) Series card VLAN Table:
VLAN ID13 | column | Integer32 | .1.3.6.1.4.1.4756.20.430.20.1.132 |
| fa4e1et100VLANTableVID14Local iMux4(T/S) Series card VLAN Table:
VLAN ID14 | column | Integer32 | .1.3.6.1.4.1.4756.20.430.20.1.133 |
| fa4e1et100VLANTableVID15Local iMux4(T/S) Series card VLAN Table:
VLAN ID15 | column | Integer32 | .1.3.6.1.4.1.4756.20.430.20.1.134 |
| fa4e1et100VLANTableVID16Local iMux4(T/S) Series card VLAN Table:
VLAN ID16 | column | Integer32 | .1.3.6.1.4.1.4756.20.430.20.1.135 |
| fa4e1et100E1Ch4SingalLocal iMux4(T/S) Series card E1 channel 4 signal status:
0:Singal Loss
1:Normal | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.14 |
| fa4e1et100E1Ch1SyncLocal iMux4(T/S) Series card E1 channel 1 sync status:
0:Sync Loss
1:Sync | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.15 |
| fa4e1et100E1Ch2SyncLocal iMux4(T/S) Series card E1 channel 2 sync status:
0:Sync Loss
1:Sync | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.16 |
| fa4e1et100E1Ch3SyncLocal iMux4(T/S) Series card E1 channel 3 sync status:
0:Sync Loss
1:Sync | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.17 |
| fa4e1et100E1Ch4SyncLocal iMux4(T/S) Series card E1 channel 4 sync status:
0:Sync Loss
1:Sync | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.18 |
| fa4e1et100E1Ch1RecvAISLocal iMux4(T/S) Series card E1 channel 1 receive AIS status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.19 |
| fa4e1et100SlotIndexLocal A unique value for each card.
It starts from 1 to 20 contiguously. | column | Integer32 | .1.3.6.1.4.1.4756.20.430.20.1.2 |
| fa4e1et100E1Ch2RecvAISLocal iMux4(T/S) Series card E1 channel 2 receive AIS status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.20 |
| fa4e1et100E1Ch3RecvAISLocal iMux4(T/S) Series card E1 channel 3 receive AIS status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.21 |
| fa4e1et100E1Ch4RecvAISLocal iMux4(T/S) Series card E1 channel 4 receive AIS status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.22 |
| fa4e1et100E1Ch1ConnTypeLocal iMux4(T/S) Series card E1 channel 1 connector type:
0:RJ-48C
1:BNC | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.23 |
| fa4e1et100E1Ch2ConnTypeLocal iMux4(T/S) Series card E1 channel 2 connector type:
0:RJ-48C
1:BNC | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.24 |
| fa4e1et100E1Ch3ConnTypeLocal iMux4(T/S) Series card E1 channel 3 connector type:
0:RJ-48C
1:BNC | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.25 |
| fa4e1et100E1Ch4ConnTypeLocal iMux4(T/S) Series card E1 channel 4 connector type:
0:RJ-48C
1:BNC | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.26 |
| fa4e1et100E1Ch1RAILocal iMux4(T/S) Series card E1 channel 1 RAI status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.27 |
| fa4e1et100E1Ch2RAILocal iMux4(T/S) Series card E1 channel 2 RAI status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.28 |
| fa4e1et100E1Ch3RAILocal iMux4(T/S) Series card E1 channel 3 RAI status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.29 |
| fa4e1et100CardHWVerLocal iMux4(T/S) Series card hardware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.430.20.1.3 |
| fa4e1et100E1Ch4RAILocal iMux4(T/S) Series card E1 channel 4 RAI status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.30 |
| fa4e1et100E1Ch1LOMFLocal iMux4(T/S) Series card E1 channel 1 LOMF status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.31 |
| fa4e1et100E1Ch2LOMFLocal iMux4(T/S) Series card E1 channel 2 LOMF status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.32 |
| fa4e1et100E1Ch3LOMFLocal iMux4(T/S) Series card E1 channel 3 LOMF status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.33 |
| fa4e1et100E1Ch4LOMFLocal iMux4(T/S) Series card E1 channel 4 LOMF status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.34 |
| fa4e1et100E1Ch1ActiveLocal iMux4(T/S) Series card E1 channel 1 active status:
0:Inactive
1:Active | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.35 |
| fa4e1et100E1Ch2ActiveLocal iMux4(T/S) Series card E1 channel 2 active status:
0:Inactive
1:Active | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.36 |
| fa4e1et100E1Ch3ActiveLocal iMux4(T/S) Series card E1 channel 3 active status:
0:Inactive
1:Active | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.37 |
| fa4e1et100E1Ch4ActiveLocal iMux4(T/S) Series card E1 channel 4 active status:
0:Inactive
1:Active | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.38 |
| fa4e1et100E1Ch1LoopBackLocal iMux4(T/S) Series card port E1 channel 1 loop back:
0:Off
2:RLB (Max used 3 channels) | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.39 |
| fa4e1et100CardFWVerLocal iMux4(T/S) Series card firmware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.430.20.1.4 |
| fa4e1et100E1Ch2LoopBackLocal iMux4(T/S) Series card port E1 channel 2 loop back:
0:Off
2:RLB (Max used 3 channels) | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.40 |
| fa4e1et100E1Ch3LoopBackLocal iMux4(T/S) Series card port E1 channel 3 loop back:
0:Off
2:RLB (Max used 3 channels) | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.41 |
| fa4e1et100E1Ch4LoopBackLocal iMux4(T/S) Series card port E1 channel 4 loop back:
0:Off
2:RLB (Max used 3 channels) | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.42 |
| fa4e1et100FxLinkLocal 5E1-ET100S Series card Fiber siganl detect status:
0:Down or Fiber unplugged
1:Up or Singal detected | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.43 |
| fa4e1et100FxLaserLocal 5E1-ET100S Series card laser status:
0:Normal
1:Error | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.44 |
| fa4e1et100FxActiveLocal 5E1-ET100S Series card Fiber active:
0:Inactive
1:Active | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.45 |
| fa4e1et100FxLaserOutputLocal 5E1-ET100S Series card laser output:
0:disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.46 |
| fa4e1et100FxOpModeLocal 5E1-ET100S Series card operation mode:
0:Switch
1:Convert | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.47 |
| fa4e1et100UtpLinkLocal 5E1-ET100T Series card UTP link status:
0:Link Down
1:Link Up | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.48 |
| fa4e1et100UtpStatusLocal 5E1-ET100T Series card UTP link mode status:
0:None, Maybe link down
1:Link at 10Mbps, Half duplex
2:Link at 10Mbps, Full duplex
3:Link at 100Mbps, Half duplex
4:Link at 100Mbps, … | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.49 |
| fa4e1et100CardCPLDVerLocal iMux4(T/S) Series card CPLD version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.430.20.1.5 |
| fa4e1et100UtpFlowCtrlStsLocal 5E1-ET100T Series card UTP flow control status:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.50 |
| fa4e1et100UtpModeLocal 5E1-ET100T Series card UTP mode:
0:Disable
1:Enable and autoNegotiation
3:Enable and force to 10Mbps, Half duplex
4:Enable and force to 10Mbps, Full duplex
5:Enable and force to 1… | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.51 |
| fa4e1et100UtpFlowCtrlLocal 5E1-ET100T Series card UTP flow control:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.52 |
| fa4e1et100SpeedLimitLocal iMux4(T/S) Series card speed limit:
Limited = this value * 32Kbps,
this value is restricted to 0 ~ 3125, 0 to disable | column | Integer32 | .1.3.6.1.4.1.4756.20.430.20.1.53 |
| fa4e1et100VlanAwareLocal iMux4(T/S) Series card 802.1q VLAN tag aware:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.54 |
| fa4e1et100VlanIDLocal iMux4(T/S) Series card VLAN ID:
The ID is restricted to 1 ~ 4094 | column | Integer32 | .1.3.6.1.4.1.4756.20.430.20.1.55 |
| fa4e1et100RemoteDeviceLocal FRM220A-5E1 Series card remote device status:
0:Link Down
1:Link Up | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.56 |
| fa4e1et100RemotePowerLocal iMux4(T/S) Series card remote device power status:
0:Normal
1:Power off | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.57 |
| fa4e1et100TimingSourceLocal iMux4(T/S) Series card clock:
0:Internal oscillatro
1:Recovery from E1 channel 1
2:Recovery from E1 channel 2
3:Recovery from E1 channel 3
4:Recovery from E1 channel 4 | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.58 |
| fa4e1et100FCSofGFPLocal iMux4(T/S) Series card FCS of GFP:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.59 |
| fa4e1et100CardFPGAVerLocal iMux4(T/S) Series card FPGA version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.430.20.1.6 |
| fa4e1et100AutoChAdjustLocal iMux4(T/S) Series card auto channel Bdjust:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.60 |
| fa4e1et100PayloadScrambleLocal iMux4(T/S) Series card payload scramble:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.61 |
| fa4e1et100FailoverLocal iMux4(T/S) Series card failover:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.62 |
| fa4e1et100LOMLocal iMux4(T/S) Series card LOM status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.63 |
| fa4e1et100SQMLocal iMux4(T/S) Series card SQM status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.64 |
| fa4e1et100CRCLocal iMux4(T/S) Series card CRC status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.65 |
| fa4e1et100LOALocal iMux4(T/S) Series card LOA status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.66 |
| fa4e1et100LFDLocal iMux4(T/S) Series card LFD status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.67 |
| fa4e1et100DDTOLocal iMux4(T/S) Series card DDTO status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.68 |
| fa4e1et100VcatMember1Local iMux4(T/S) Series card VACT member 0:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.69 |
| fa4e1et100ModelLocal Card Type:
0:iMux4T
1:iMux4S | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.7 |
| fa4e1et100VcatMember2Local iMux4(T/S) Series card VACT member 1:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.70 |
| fa4e1et100VcatMember3Local iMux4(T/S) Series card VACT member 3:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.71 |
| fa4e1et100VcatMember4Local iMux4(T/S) Series card VACT member 4:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.72 |
| fa4e1et100SnmpChannel1Local iMux4(T/S) Series card SNMP channel 0:
0:No use
1:Use | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.73 |
| fa4e1et100SnmpChannel2Local iMux4(T/S) Series card SNMP channel 1:
0:No use
1:Use | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.74 |
| fa4e1et100SnmpChannel3Local iMux4(T/S) Series card SNMP channel 3:
0:No use
1:Use | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.75 |
| fa4e1et100SnmpChannel4Local iMux4(T/S) Series card SNMP channel 4:
0:No use
1:Use | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.76 |
| fa4e1et100ErrSecLocal iMux4(T/S) Series card, errored seconds of BERT result. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.430.20.1.77 |
| fa4e1et100ErrFreeSecLocal iMux4(T/S) Series card, errored free seconds of BERT result. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.430.20.1.78 |
| fa4e1et100ServErrSecLocal iMux4(T/S) Series card, severely errored seconds of BERT result. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.430.20.1.79 |
| fa4e1et100SystemStatusLocal iMux4(T/S) Series card system status:
0:Normal
1:Alarm | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.8 |
| fa4e1et100BertFunctionLocal iMux4(T/S) Series card bert function:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.80 |
| fa4e1et100ClrBertDataLocal iMux4(T/S) Series card bert data clear:
0:Normal
1:Clear | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.81 |
| fa4e1et100BertE1ChannelLocal iMux4(T/S) Series card bert E1 channel number:
0:E1 channel 1
1:E1 channel 2
2:E1 channel 3
3:E1 channel 4 | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.82 |
| fa4e1et100RmonTxLocal iMux4(T/S) Series card RMON Tx counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.430.20.1.84 |
| fa4e1et100RmonRxLocal iMux4(T/S) Series card RMON Rx counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.430.20.1.85 |
| fa4e1et100ClrRmonTxLocal iMux4(T/S) Series card clear RMON Tx counter:
0:Normal
1:Clear | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.86 |
| fa4e1et100ClrRmonRxLocal iMux4(T/S) Series card clear RMON Rx counter:
0:Normal
1:Clear | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.87 |
| fa4e1et100SfpLocal iMux4(T/S) Series card, SFP existed:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.88 |
| fa4e1et100SfpVendorLocal iMux4(T/S) Series card, Vendor name of SFP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.430.20.1.89 |
| fa4e1et100DeviceActiveLocal iMux4(T/S) Series card active:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.9 |
| fa4e1et100SfpPartNoLocal iMux4(T/S) Series card, Vendor part number of SFP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.430.20.1.90 |
| fa4e1et100SfpFiberTypeLocal iMux4(T/S) Series card, Fiber Type of SFP. | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.91 |
| fa4e1et100SfpTxWaveLenLocal iMux4(T/S) Series card, Tx Wave length of SFP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.430.20.1.92 |
| fa4e1et100SfpRxWaveLenLocal iMux4(T/S) Series card, Rx Wave length of SFP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.430.20.1.93 |
| fa4e1et100SfpLinkLenLocal iMux4(T/S) Series card, Link length of SFP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.430.20.1.94 |
| fa4e1et100SfpModelIDLocal iMux4(T/S) Series card, model ID of SFP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.430.20.1.95 |
| fa4e1et100SfpVersionLocal iMux4(T/S) Series card, the version of SFP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.430.20.1.96 |
| fa4e1et100SfpModelTypeLocal iMux4(T/S) Series card, model type of SFP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.430.20.1.97 |
| fa4e1et100DDInformationLocal iMux4(T/S) Series card, D/D information of SFP Supported:
0:No,
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.430.20.1.98 |
| fa4e1et100DDRxSensLocal iMux4(T/S) Series card, Sensitivity of D/D information. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.430.20.1.99 |