fa4e1et100DDRxSensLocal

CTC-FRM220-MIB · .1.3.6.1.4.1.4756.20.430.20.1.99
MIB view Table view

Object

column SNMPv2-TCDisplayString 
iMux4(T/S) Series card, Sensitivity of D/D information.

Context

MIB
CTC-FRM220-MIB
OID
.1.3.6.1.4.1.4756.20.430.20.1.99
Type
column
Access
readonly
Status
current
Parent
f4E1LocalEntry
Table
f4E1LocalTable
Siblings
134

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fa4e1et100ChassisIndexLocal
A unique value for each card. It starts from 0 to 9 contiguously.
columnInteger32.1.3.6.1.4.1.4756.20.430.20.1.1
fa4e1et100SetToDefaultLocal
iMux4(T/S) Series card port set to default: 0:Off 1:Trigger
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.10
fa4e1et100DDTxPowerLocal
iMux4(T/S) Series card, Tx power of D/D information.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.430.20.1.100
fa4e1et100DDRxPowerLocal
iMux4(T/S) Series card, Rx power of D/D information.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.430.20.1.101
fa4e1et100DDTempLocal
iMux4(T/S) Series card, Temperature of D/D information in degree C.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.430.20.1.102
fa4e1et100DDBiasLocal
iMux4(T/S) Series card, BIAS of D/D information.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.430.20.1.103
fa4e1et100DDVoltageLocal
iMux4(T/S) Series card, Voltage of D/D information.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.430.20.1.104
fa4e1et100ChannelDefectLocal
iMux4(T/S) Series card Channel Defect: 0:Disable 4:1E-4 6:1E-6
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.105
fa4e1et100LoopDetectionLocal
iMux4(T/S) Series card Loop Detection: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.106
fa4e1et100LoopCh1Local
iMux4(T/S) Series card E1 channel 1 Loop Check State: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.107
fa4e1et100LoopCh2Local
iMux4(T/S) Series card E1 channel 2 Loop Check State: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.108
fa4e1et100LoopCh3Local
iMux4(T/S) Series card E1 channel 3 Loop Check State: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.109
fa4e1et100E1Ch1SingalLocal
iMux4(T/S) Series card E1 channel 1 signal status: 0:Singal Loss 1:Normal
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.11
fa4e1et100LoopCh4Local
iMux4(T/S) Series card E1 channel 4 Loop Check State: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.110
fa4e1et100DefectCh1Local
iMux4(T/S) Series card E1 channel 1 Defect Status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.111
fa4e1et100DefectCh2Local
iMux4(T/S) Series card E1 channel 2 Defect Status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.112
fa4e1et100DefectCh3Local
iMux4(T/S) Series card E1 channel 3 Defect Status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.113
fa4e1et100DefectCh4Local
iMux4(T/S) Series card E1 channel 4 Defect Status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.114
fa4e1et100FxSignalLocal
iMux4(T/S) Series card Fiber signal detect(SD): 0:Fiber unplugged 1:Signal detected
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.115
fa4e1et100PortResetLocal
iMux4(T/S) Series card Port Reset: 0:Off 1:Action
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.116
fa4e1et100VLANModeLocal
iMux4(T/S) Series card VLAN mode: 0:MODE2 1:MODE1
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.117
fa4e1et100ETagSelectEntryLocal
iMux4(T/S) Series card ETag select entry:
columnInteger32.1.3.6.1.4.1.4756.20.430.20.1.118
fa4e1et100ETagMethodLocal
iMux4(T/S) Series card ETag Method: 0: Intouch 1: Add Tag 2: Remove Tag
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.119
fa4e1et100E1Ch2SingalLocal
iMux4(T/S) Series card E1 channel 2 signal status: 0:Singal Loss 1:Normal
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.12
fa4e1et100VLANTableVID1Local
iMux4(T/S) Series card VLAN Table: VLAN ID1
columnInteger32.1.3.6.1.4.1.4756.20.430.20.1.120
fa4e1et100VLANTableVID2Local
iMux4(T/S) Series card VLAN Table: VLAN ID2
columnInteger32.1.3.6.1.4.1.4756.20.430.20.1.121
fa4e1et100VLANTableVID3Local
iMux4(T/S) Series card VLAN Table: VLAN ID3
columnInteger32.1.3.6.1.4.1.4756.20.430.20.1.122
fa4e1et100VLANTableVID4Local
iMux4(T/S) Series card VLAN Table: VLAN ID4
columnInteger32.1.3.6.1.4.1.4756.20.430.20.1.123
fa4e1et100VLANTableVID5Local
iMux4(T/S) Series card VLAN Table: VLAN ID5
columnInteger32.1.3.6.1.4.1.4756.20.430.20.1.124
fa4e1et100VLANTableVID6Local
iMux4(T/S) Series card VLAN Table: VLAN ID6
columnInteger32.1.3.6.1.4.1.4756.20.430.20.1.125
fa4e1et100VLANTableVID7Local
iMux4(T/S) Series card VLAN Table: VLAN ID7
columnInteger32.1.3.6.1.4.1.4756.20.430.20.1.126
fa4e1et100VLANTableVID8Local
iMux4(T/S) Series card VLAN Table: VLAN ID8
columnInteger32.1.3.6.1.4.1.4756.20.430.20.1.127
fa4e1et100VLANTableVID9Local
iMux4(T/S) Series card VLAN Table: VLAN ID9
columnInteger32.1.3.6.1.4.1.4756.20.430.20.1.128
fa4e1et100VLANTableVID10Local
iMux4(T/S) Series card VLAN Table: VLAN ID10
columnInteger32.1.3.6.1.4.1.4756.20.430.20.1.129
fa4e1et100E1Ch3SingalLocal
iMux4(T/S) Series card E1 channel 3 signal status: 0:Singal Loss 1:Normal
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.13
fa4e1et100VLANTableVID11Local
iMux4(T/S) Series card VLAN Table: VLAN ID11
columnInteger32.1.3.6.1.4.1.4756.20.430.20.1.130
fa4e1et100VLANTableVID12Local
iMux4(T/S) Series card VLAN Table: VLAN ID12
columnInteger32.1.3.6.1.4.1.4756.20.430.20.1.131
fa4e1et100VLANTableVID13Local
iMux4(T/S) Series card VLAN Table: VLAN ID13
columnInteger32.1.3.6.1.4.1.4756.20.430.20.1.132
fa4e1et100VLANTableVID14Local
iMux4(T/S) Series card VLAN Table: VLAN ID14
columnInteger32.1.3.6.1.4.1.4756.20.430.20.1.133
fa4e1et100VLANTableVID15Local
iMux4(T/S) Series card VLAN Table: VLAN ID15
columnInteger32.1.3.6.1.4.1.4756.20.430.20.1.134
fa4e1et100VLANTableVID16Local
iMux4(T/S) Series card VLAN Table: VLAN ID16
columnInteger32.1.3.6.1.4.1.4756.20.430.20.1.135
fa4e1et100E1Ch4SingalLocal
iMux4(T/S) Series card E1 channel 4 signal status: 0:Singal Loss 1:Normal
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.14
fa4e1et100E1Ch1SyncLocal
iMux4(T/S) Series card E1 channel 1 sync status: 0:Sync Loss 1:Sync
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.15
fa4e1et100E1Ch2SyncLocal
iMux4(T/S) Series card E1 channel 2 sync status: 0:Sync Loss 1:Sync
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.16
fa4e1et100E1Ch3SyncLocal
iMux4(T/S) Series card E1 channel 3 sync status: 0:Sync Loss 1:Sync
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.17
fa4e1et100E1Ch4SyncLocal
iMux4(T/S) Series card E1 channel 4 sync status: 0:Sync Loss 1:Sync
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.18
fa4e1et100E1Ch1RecvAISLocal
iMux4(T/S) Series card E1 channel 1 receive AIS status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.19
fa4e1et100SlotIndexLocal
A unique value for each card. It starts from 1 to 20 contiguously.
columnInteger32.1.3.6.1.4.1.4756.20.430.20.1.2
fa4e1et100E1Ch2RecvAISLocal
iMux4(T/S) Series card E1 channel 2 receive AIS status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.20
fa4e1et100E1Ch3RecvAISLocal
iMux4(T/S) Series card E1 channel 3 receive AIS status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.21
fa4e1et100E1Ch4RecvAISLocal
iMux4(T/S) Series card E1 channel 4 receive AIS status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.22
fa4e1et100E1Ch1ConnTypeLocal
iMux4(T/S) Series card E1 channel 1 connector type: 0:RJ-48C 1:BNC
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.23
fa4e1et100E1Ch2ConnTypeLocal
iMux4(T/S) Series card E1 channel 2 connector type: 0:RJ-48C 1:BNC
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.24
fa4e1et100E1Ch3ConnTypeLocal
iMux4(T/S) Series card E1 channel 3 connector type: 0:RJ-48C 1:BNC
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.25
fa4e1et100E1Ch4ConnTypeLocal
iMux4(T/S) Series card E1 channel 4 connector type: 0:RJ-48C 1:BNC
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.26
fa4e1et100E1Ch1RAILocal
iMux4(T/S) Series card E1 channel 1 RAI status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.27
fa4e1et100E1Ch2RAILocal
iMux4(T/S) Series card E1 channel 2 RAI status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.28
fa4e1et100E1Ch3RAILocal
iMux4(T/S) Series card E1 channel 3 RAI status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.29
fa4e1et100CardHWVerLocal
iMux4(T/S) Series card hardware version x.xxx
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.430.20.1.3
fa4e1et100E1Ch4RAILocal
iMux4(T/S) Series card E1 channel 4 RAI status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.30
fa4e1et100E1Ch1LOMFLocal
iMux4(T/S) Series card E1 channel 1 LOMF status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.31
fa4e1et100E1Ch2LOMFLocal
iMux4(T/S) Series card E1 channel 2 LOMF status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.32
fa4e1et100E1Ch3LOMFLocal
iMux4(T/S) Series card E1 channel 3 LOMF status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.33
fa4e1et100E1Ch4LOMFLocal
iMux4(T/S) Series card E1 channel 4 LOMF status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.34
fa4e1et100E1Ch1ActiveLocal
iMux4(T/S) Series card E1 channel 1 active status: 0:Inactive 1:Active
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.35
fa4e1et100E1Ch2ActiveLocal
iMux4(T/S) Series card E1 channel 2 active status: 0:Inactive 1:Active
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.36
fa4e1et100E1Ch3ActiveLocal
iMux4(T/S) Series card E1 channel 3 active status: 0:Inactive 1:Active
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.37
fa4e1et100E1Ch4ActiveLocal
iMux4(T/S) Series card E1 channel 4 active status: 0:Inactive 1:Active
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.38
fa4e1et100E1Ch1LoopBackLocal
iMux4(T/S) Series card port E1 channel 1 loop back: 0:Off 2:RLB (Max used 3 channels)
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.39
fa4e1et100CardFWVerLocal
iMux4(T/S) Series card firmware version x.xxx
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.430.20.1.4
fa4e1et100E1Ch2LoopBackLocal
iMux4(T/S) Series card port E1 channel 2 loop back: 0:Off 2:RLB (Max used 3 channels)
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.40
fa4e1et100E1Ch3LoopBackLocal
iMux4(T/S) Series card port E1 channel 3 loop back: 0:Off 2:RLB (Max used 3 channels)
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.41
fa4e1et100E1Ch4LoopBackLocal
iMux4(T/S) Series card port E1 channel 4 loop back: 0:Off 2:RLB (Max used 3 channels)
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.42
fa4e1et100FxLinkLocal
5E1-ET100S Series card Fiber siganl detect status: 0:Down or Fiber unplugged 1:Up or Singal detected
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.43
fa4e1et100FxLaserLocal
5E1-ET100S Series card laser status: 0:Normal 1:Error
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.44
fa4e1et100FxActiveLocal
5E1-ET100S Series card Fiber active: 0:Inactive 1:Active
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.45
fa4e1et100FxLaserOutputLocal
5E1-ET100S Series card laser output: 0:disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.46
fa4e1et100FxOpModeLocal
5E1-ET100S Series card operation mode: 0:Switch 1:Convert
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.47
fa4e1et100UtpLinkLocal
5E1-ET100T Series card UTP link status: 0:Link Down 1:Link Up
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.48
fa4e1et100UtpStatusLocal
5E1-ET100T Series card UTP link mode status: 0:None, Maybe link down 1:Link at 10Mbps, Half duplex 2:Link at 10Mbps, Full duplex 3:Link at 100Mbps, Half duplex 4:Link at 100Mbps, …
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.49
fa4e1et100CardCPLDVerLocal
iMux4(T/S) Series card CPLD version x.xxx
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.430.20.1.5
fa4e1et100UtpFlowCtrlStsLocal
5E1-ET100T Series card UTP flow control status: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.50
fa4e1et100UtpModeLocal
5E1-ET100T Series card UTP mode: 0:Disable 1:Enable and autoNegotiation 3:Enable and force to 10Mbps, Half duplex 4:Enable and force to 10Mbps, Full duplex 5:Enable and force to 1…
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.51
fa4e1et100UtpFlowCtrlLocal
5E1-ET100T Series card UTP flow control: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.52
fa4e1et100SpeedLimitLocal
iMux4(T/S) Series card speed limit: Limited = this value * 32Kbps, this value is restricted to 0 ~ 3125, 0 to disable
columnInteger32.1.3.6.1.4.1.4756.20.430.20.1.53
fa4e1et100VlanAwareLocal
iMux4(T/S) Series card 802.1q VLAN tag aware: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.54
fa4e1et100VlanIDLocal
iMux4(T/S) Series card VLAN ID: The ID is restricted to 1 ~ 4094
columnInteger32.1.3.6.1.4.1.4756.20.430.20.1.55
fa4e1et100RemoteDeviceLocal
FRM220A-5E1 Series card remote device status: 0:Link Down 1:Link Up
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.56
fa4e1et100RemotePowerLocal
iMux4(T/S) Series card remote device power status: 0:Normal 1:Power off
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.57
fa4e1et100TimingSourceLocal
iMux4(T/S) Series card clock: 0:Internal oscillatro 1:Recovery from E1 channel 1 2:Recovery from E1 channel 2 3:Recovery from E1 channel 3 4:Recovery from E1 channel 4
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.58
fa4e1et100FCSofGFPLocal
iMux4(T/S) Series card FCS of GFP: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.59
fa4e1et100CardFPGAVerLocal
iMux4(T/S) Series card FPGA version x.xxx
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.430.20.1.6
fa4e1et100AutoChAdjustLocal
iMux4(T/S) Series card auto channel Bdjust: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.60
fa4e1et100PayloadScrambleLocal
iMux4(T/S) Series card payload scramble: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.61
fa4e1et100FailoverLocal
iMux4(T/S) Series card failover: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.62
fa4e1et100LOMLocal
iMux4(T/S) Series card LOM status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.63
fa4e1et100SQMLocal
iMux4(T/S) Series card SQM status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.64
fa4e1et100CRCLocal
iMux4(T/S) Series card CRC status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.65
fa4e1et100LOALocal
iMux4(T/S) Series card LOA status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.66
fa4e1et100LFDLocal
iMux4(T/S) Series card LFD status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.67
fa4e1et100DDTOLocal
iMux4(T/S) Series card DDTO status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.68
fa4e1et100VcatMember1Local
iMux4(T/S) Series card VACT member 0: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.69
fa4e1et100ModelLocal
Card Type: 0:iMux4T 1:iMux4S
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.7
fa4e1et100VcatMember2Local
iMux4(T/S) Series card VACT member 1: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.70
fa4e1et100VcatMember3Local
iMux4(T/S) Series card VACT member 3: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.71
fa4e1et100VcatMember4Local
iMux4(T/S) Series card VACT member 4: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.72
fa4e1et100SnmpChannel1Local
iMux4(T/S) Series card SNMP channel 0: 0:No use 1:Use
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.73
fa4e1et100SnmpChannel2Local
iMux4(T/S) Series card SNMP channel 1: 0:No use 1:Use
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.74
fa4e1et100SnmpChannel3Local
iMux4(T/S) Series card SNMP channel 3: 0:No use 1:Use
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.75
fa4e1et100SnmpChannel4Local
iMux4(T/S) Series card SNMP channel 4: 0:No use 1:Use
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.76
fa4e1et100ErrSecLocal
iMux4(T/S) Series card, errored seconds of BERT result.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4756.20.430.20.1.77
fa4e1et100ErrFreeSecLocal
iMux4(T/S) Series card, errored free seconds of BERT result.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4756.20.430.20.1.78
fa4e1et100ServErrSecLocal
iMux4(T/S) Series card, severely errored seconds of BERT result.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4756.20.430.20.1.79
fa4e1et100SystemStatusLocal
iMux4(T/S) Series card system status: 0:Normal 1:Alarm
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.8
fa4e1et100BertFunctionLocal
iMux4(T/S) Series card bert function: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.80
fa4e1et100ClrBertDataLocal
iMux4(T/S) Series card bert data clear: 0:Normal 1:Clear
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.81
fa4e1et100BertE1ChannelLocal
iMux4(T/S) Series card bert E1 channel number: 0:E1 channel 1 1:E1 channel 2 2:E1 channel 3 3:E1 channel 4
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.82
fa4e1et100RmonFunctionLocal
iMux4(T/S) Series RMON function : 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.83
fa4e1et100RmonTxLocal
iMux4(T/S) Series card RMON Tx counter.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.430.20.1.84
fa4e1et100RmonRxLocal
iMux4(T/S) Series card RMON Rx counter.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.430.20.1.85
fa4e1et100ClrRmonTxLocal
iMux4(T/S) Series card clear RMON Tx counter: 0:Normal 1:Clear
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.86
fa4e1et100ClrRmonRxLocal
iMux4(T/S) Series card clear RMON Rx counter: 0:Normal 1:Clear
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.87
fa4e1et100SfpLocal
iMux4(T/S) Series card, SFP existed: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.88
fa4e1et100SfpVendorLocal
iMux4(T/S) Series card, Vendor name of SFP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.430.20.1.89
fa4e1et100DeviceActiveLocal
iMux4(T/S) Series card active: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.9
fa4e1et100SfpPartNoLocal
iMux4(T/S) Series card, Vendor part number of SFP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.430.20.1.90
fa4e1et100SfpFiberTypeLocal
iMux4(T/S) Series card, Fiber Type of SFP.
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.91
fa4e1et100SfpTxWaveLenLocal
iMux4(T/S) Series card, Tx Wave length of SFP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.430.20.1.92
fa4e1et100SfpRxWaveLenLocal
iMux4(T/S) Series card, Rx Wave length of SFP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.430.20.1.93
fa4e1et100SfpLinkLenLocal
iMux4(T/S) Series card, Link length of SFP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.430.20.1.94
fa4e1et100SfpModelIDLocal
iMux4(T/S) Series card, model ID of SFP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.430.20.1.95
fa4e1et100SfpVersionLocal
iMux4(T/S) Series card, the version of SFP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.430.20.1.96
fa4e1et100SfpModelTypeLocal
iMux4(T/S) Series card, model type of SFP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.430.20.1.97
fa4e1et100DDInformationLocal
iMux4(T/S) Series card, D/D information of SFP Supported: 0:No, 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.430.20.1.98