configDumpModule

CTATX-MIB · .1.3.6.1.4.1.97.3.3.1.19
MIB view Table view

Object

scalar mandatory r/w Integer32 
Flag to select the module to dump on a crash.
If set to a value of 1 to 7 the relevant module's
memory will be sent to the UART port on detecting
a fatal error situation. A value of zero will
disable the dump option. A value of 1 selects the
ME, 7 selects the TURBO, and 2-6 select IOMs.

Context

MIB
CTATX-MIB
OID
.1.3.6.1.4.1.97.3.3.1.19
Type
scalar
Access
readwrite
Status
mandatory
Parent
config
Siblings
19

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
configFatalErr mandatory
This is a 32 byte array which contains information about the cause of the previous system reset. This will describe the circumstances which forced the system software to perform a…
scalarOctetString.1.3.6.1.4.1.97.3.3.1.1
configPowerPresent1 mandatory
Whether the first power supply is present.
scalarEnumeration.1.3.6.1.4.1.97.3.3.1.10
configPowerPresent2 mandatory
Whether the second power supply is present.
scalarEnumeration.1.3.6.1.4.1.97.3.3.1.11
configAlarmDynamic mandatory
Whether changes in dynamic parameters (except for the dynamically learned addresses) should cause enterprise specific trap PDUs to be generated.
scalarEnumeration.1.3.6.1.4.1.97.3.3.1.12
configAlarmAddresses mandatory
Whether changes in the dynamically learned addresses should cause enterprise specific trap PDUs to be generated.
scalarEnumeration.1.3.6.1.4.1.97.3.3.1.13
configStorageFailure mandatory
Whether the ES/1's storage facility for its configuration parameters has failed (the ES/1 may not be able to reboot after such a failure).
scalarEnumeration.1.3.6.1.4.1.97.3.3.1.14
configAuthenticationFailure mandatory
All nulls, or the IP source address within the last SNMP PDU which caused an SNMP authentication failure.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.97.3.3.1.15
configFddiPriority mandatory
Priority to use when forwarding packets to any FDDI port from any non-FDDI port.
scalarInteger32.1.3.6.1.4.1.97.3.3.1.16
configTprPriority mandatory
Priority to use when forwarding packets to any Token-Ring port from any non-Token-Ring port.
scalarInteger32.1.3.6.1.4.1.97.3.3.1.17
configAnyPass mandatory
The authentication password (0-24 bytes) which must match the community name in an SNMP PDU, in order for the operation to be performed. A zero length password indicates that any …
scalarOctetString.1.3.6.1.4.1.97.3.3.1.2
configDumpStart mandatory
Starting address of memory to dump upon detecting a fatal error.
scalarInteger32.1.3.6.1.4.1.97.3.3.1.20
configDumpEnd mandatory
Ending address of memory to dump upon detecting a fatal error.
scalarInteger32.1.3.6.1.4.1.97.3.3.1.21
configGetPass mandatory
The authentication password (0-24 bytes) which must match the community name in an SNMP Get PDU (except for Debug or password parameters). A zero length password indicates that an…
scalarOctetString.1.3.6.1.4.1.97.3.3.1.3
configNMSAddress mandatory
The address of the NMS to which Trap PDUs are to be sent. A value of zero indicates that Trap PDUs should be sent to the NMS last heard from.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.97.3.3.1.4
configFunctions mandatory
A bit field which describes the software functions supported by this ES/1. The possible values are: 0x0001 NMS, 0x0002 TBRIDGE, 0x0004 SBRIDGE, 0x0008 MESH, 0x0010 IPROU…
scalarInteger32.1.3.6.1.4.1.97.3.3.1.5
configPowerAc1 mandatory
Whether the first power supply has AC input.
scalarEnumeration.1.3.6.1.4.1.97.3.3.1.6
configPowerAc2 mandatory
Whether the second power supply has AC input.
scalarEnumeration.1.3.6.1.4.1.97.3.3.1.7
configPowerDc1 mandatory
Whether the first power supply provides DC voltage.
scalarEnumeration.1.3.6.1.4.1.97.3.3.1.8
configPowerDc2 mandatory
Whether the second power supply provides DC voltage.
scalarEnumeration.1.3.6.1.4.1.97.3.3.1.9