addrBlockSize
CTATX-MIB ·
.1.3.6.1.4.1.97.3.5.52
Object
scalar
mandatory
r/w
Integer32
The number of addresses contained by addrBlock.This parameter is only used for dumping blocks of MAC addresses.
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| addrStatics mandatory The number of static addresses which are currently stored in
the ES/1. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.97.3.5.1 |
| addrPortMap obsolete This is a bitmap of up to 32 sets of 32 bits each (128
octets), which defines which source ports are allowed to
forward packets to which destination ports. Within each set
of four… | scalar | OctetString | .1.3.6.1.4.1.97.3.5.10 |
| addrDynamics mandatory The number of learned addresses in the address table. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.97.3.5.2 |
| addrDynamicMax mandatory The maximum number of spanning tree addresses which have
been learned since the ES/1 was last booted (or this
parameter was last reset by the NMS). | scalar | RFC1155-SMIGauge | .1.3.6.1.4.1.97.3.5.3 |
| addrMeshs mandatory The number of ATM, Frame Relay, and/or SMDS addresses in the
address table. These addresses are not reflected within
addrStatics nor addrDynamics. [ATM, Frame Relay, and SMDS
are … | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.97.3.5.4 |
| addrOperation mandatory The operation to be performed upon the described address.
The possibilities include: read-random (1), read-next (2),
zero-stats (3), update (4), delete (5), read-block (6). | scalar | Enumeration | .1.3.6.1.4.1.97.3.5.41 |
| addrIndex mandatory The index number to be used for read-next and read-block
operations. When the ES/1 boots, addrIndex is initialized
to -1. | scalar | Integer32 | .1.3.6.1.4.1.97.3.5.42 |
| addrNext mandatory The next value to use for addrIndex, when you use read-next
or read-block operations to read the address table. When the
ES/1 boots, addrNext is initialized to -1. | scalar | Integer32 | .1.3.6.1.4.1.97.3.5.44 |
| addrAge mandatory The time, in centiseconds, since a packet was last received
from the address on a port that was in Spanning Tree
learning or forwarding state. If no packets have been
received, th… | scalar | RFC1155-SMITimeTicks | .1.3.6.1.4.1.97.3.5.45 |
| addrRxPkts mandatory The number of packets received from the address on a port
that was in Spanning Tree learning or forwarding state (can
be zeroed by zero-stats). | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.97.3.5.46 |
| addrRxChars mandatory The number of characters in the packets received from the
address on a port that was in Spanning Tree Learning or
Forwarding state (can be zeroed by zero-stats). | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.97.3.5.47 |
| addrRxMultiPkts mandatory The number of multicast packets received from the address on
a port that was in Spanning Tree Learning or Forwarding
state (can be zeroed by zero-stats). | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.97.3.5.48 |
| addrRxFwdPkts mandatory The number of packets received from the address which were
forwarded (can be zeroed by zero-stats). This includes packets
that were MAC-layer bridged because they were receive… | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.97.3.5.49 |
| addrDynamicOverflows mandatory The number times an address was not learned due to
insufficient address table space. | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.97.3.5.5 |
| addrTxPkts mandatory The number of packets transmitted to the address (can be zeroed
by zero-stats). | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.97.3.5.50 |
| addrTxChars mandatory The number of characters in the packets transmitted to the
address (can be zeroed by zero-stats). | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.97.3.5.51 |
| addrBlock mandatory A series of 0-700 octets, which represents 0-100 addresses.
Each address consists of a 6 octet MacAddress followed by a
1 byte port number. If the port number is zero, then the
ad… | scalar | OctetString | .1.3.6.1.4.1.97.3.5.53 |
| addrAlarmMAC mandatory The MAC address for an address entry. This parameter is only
used by the ES/1's enterprise specific trap mechanism. | scalar | OctetString | .1.3.6.1.4.1.97.3.5.54 |
| addrRptrPort mandatory The repeater port through which this address is connected to
the port indicated by addrPort. This parameter is only valid
if the port's srepeaterExtendedStats is enabled, and if t… | scalar | Integer32 | .1.3.6.1.4.1.97.3.5.55 |
| addrMeshOverflows mandatory The number of times an ATM, Frame Relay, or SMDS address
could not be learned due to insufficient address table space.
[ATM, Frame Relay, and SMDS are not yet implemented.] | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.97.3.5.6 |
| addrFlags mandatory Flags to describe the use and control of this address entry.
Each bit has a different meaning. The NMS must always set
either entry-static, entry-none, or entry-mesh; however, for… | scalar | Integer32 | .1.3.6.1.4.1.97.3.5.7 |
| addrMAC mandatory The MAC address for this address definition. | scalar | OctetString | .1.3.6.1.4.1.97.3.5.8 |
| addrPort mandatory The port through which this address is connected to the ES/1
(only valid for entry-dynamic-local, entry-statistics, and
entry-port entries). | scalar | Integer32 | .1.3.6.1.4.1.97.3.5.9 |