waterCoolUnitOutputType

CPQWCRM-MIB · .1.3.6.1.4.1.232.167.2.4.6.2.1.2

Object

column mandatory Enumeration

Type of output which is connected to water cool unit to output[waterCoolUnitOutputIndex]
1: no output connected
2: output failure   
3: value overflow
4: water valve setpoint
5: water valve hysteresis
6: command for manual control
7: Flow Meter Model, 0=SIKA, 1=Chemline
8: minimum fan speed
9: min delta T, used for fan control
10: max delta T, used for fan control 
11: specific heat capacity
12: setpoint heatload warning
13: setpoint Water Flow Loss Emergency Door Opening
14: setpoint High Temperature Emergency Door Opening
15: setpoint Condensation Pump Cycles (Warning)
16: setpoint Condensation Pump Running Time (Warning)
17: command for door opening, 0=lock door, 1=unlock door
18: KP parameter for PID controller
19: KI parameter for PID controller
20: KD parameter for PID controller
21: sampling time PID controller
22: number of installed fans
23: offset for cold water temperature
24: offset for hot water temperature
25: valve control mode
26: isolation valve inlet, manual control
27: isolation valve facility, manual control
28: isolation valve infrastructure, manual control
29: control valve facility, manual setting
30: control valve infrastructure, manual setting
31: fan control mode
32: fan 1, manual setting
33: fan 2, manual setting
34: fan 3, manual setting
35: fan 4: manual setting
36: setpoint for air difference pressure (fan control), 
  this value is scaled with 1000 
  (e. g. 0.1 inch H2O are entered as 100)
37: KP parameter for Fan PID controller
38: KI parameter for Fan PID controller
39: KD parameter for Fan PID controller
40: sampling time Fan PID controller			  
41: dewpoint Offset for dewpoint average Value
42: max IT Air Temperature, Limit for dewpoint control
43: dewpoint control mode, 0 = off, 1 = On

Context

MIB: CPQWCRM-MIB
OID: .1.3.6.1.4.1.232.167.2.4.6.2.1.2
Type: column
Access: readonly
Status: mandatory
Parent: cpqWcrmWaterCoolUnitOutputEntry
Table: cpqWcrmWaterCoolUnitOutputTable
Siblings: 8

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	notAvail
`2`	failure
`3`	overflow
`4`	setpoint
`5`	hysteresis
`6`	command
`7`	controlMode
`8`	fanSpeedMin
`9`	dTmin
`10`	dTmax
`11`	cpWatert
`12`	setHeatload
`13`	setEdoFlow
`14`	setEdoHeat
`15`	setCondCycles
`16`	setCondRun
`17`	doorControl
`18`	pidContrKP
`19`	pidContrKI
`20`	pidContrKD
`21`	pidSampleTime
`22`	installedFans
`23`	offsetCW
`24`	offsetHW
`25`	valveControlMode
`26`	isolationValveInletManual
`27`	isolationValveFacilityManual
`28`	isolationValveInfrastructureManual
`29`	controlValveFacilityManual
`30`	controlValveInfrastructureManual
`31`	fanControlMode
`32`	fan1Manual
`33`	fan2Manual
`34`	fan3Manual
`35`	fan4Manual
`36`	setpointAirDifPressure
`37`	pidContrKPFan
`38`	pidContrKIFan
`39`	pidContrKDFan
`40`	pidSampleTimeFan
`41`	dewpointOffset
`42`	maxItAirTemperature
`43`	dewpointControlMode

Related Objects

Sibling Objects

Object	Type	Syntax	OID
waterCoolUnitOutputIndex mandatory Index for the list of output entries. Its value ranges between 1 and the value of cpqWcrmWaterCoolUnitNumberOfOutputs.	column	Integer32	`.1.3.6.1.4.1.232.167.2.4.6.2.1.1`
waterCoolUnitOutputText mandatory Descriptional text for each output (entry in the table)	column	OctetString	`.1.3.6.1.4.1.232.167.2.4.6.2.1.3`
waterCoolUnitOutputStatus mandatory Actual status of the output	column	Enumeration	`.1.3.6.1.4.1.232.167.2.4.6.2.1.4`
waterCoolUnitOutputValue mandatory Signed value for output	column	Integer32	`.1.3.6.1.4.1.232.167.2.4.6.2.1.5`
waterCoolUnitOutputSet mandatory Command for output	column	Enumeration	`.1.3.6.1.4.1.232.167.2.4.6.2.1.6`
waterCoolUnitOutputConfig mandatory Configuration for output 1: disable remote control (e.g. keypad) 2: enable remote control	column	Enumeration	`.1.3.6.1.4.1.232.167.2.4.6.2.1.7`
waterCoolUnitOutputDelay mandatory Unsigned Value for delay, after this time the output will fall into the previous state	column	Integer32	`.1.3.6.1.4.1.232.167.2.4.6.2.1.8`
waterCoolUnitOutputTimeoutAction mandatory State for output if timeout (RS422) occurs	column	Enumeration	`.1.3.6.1.4.1.232.167.2.4.6.2.1.9`