upsRecepShedSecsWithRestart
CPQPOWER-MIB ·
.1.3.6.1.4.1.232.165.3.10.2.1.7
Object
column
mandatory
r/w
Integer32
Setting this value will cause the UPS output to turn off after the set number of seconds, then restart (after a UPS-defined 'down time') when the utility is again available. Unlike UpsRecepOffDelaySecs, which might or might not, this object always maps to the XCP 0x8A Load Dump & Restart command, so the desired shutdown and restart behavior is guaranteed to happen. Once set, this command cannot be aborted.
Context
- MIB
- CPQPOWER-MIB
- OID
.1.3.6.1.4.1.232.165.3.10.2.1.7- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- upsRecepEntry
- Table
- upsRecepTable
- Siblings
- 6
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| upsRecepIndex mandatory The number of the Receptacle. Serves as index for Receptacle table. | column | Integer32 | .1.3.6.1.4.1.232.165.3.10.2.1.1 |
| upsRecepStatus mandatory The Recep Status 1=On/Close, 2=Off/Open, 3=On w/Pending Off,
4=Off w/Pending ON, 5=Unknown. | column | Enumeration | .1.3.6.1.4.1.232.165.3.10.2.1.2 |
| upsRecepOffDelaySecs mandatory The Delay until the Receptacle is turned Off. Setting
this value to other than -1 will cause the UPS output to
turn off after the number of seconds (0 is immediately).
Settin… | column | Integer32 | .1.3.6.1.4.1.232.165.3.10.2.1.3 |
| upsRecepOnDelaySecs mandatory The Delay until the Receptacle is turned On. Setting
this value to other than -1 will cause the UPS output to
turn on after the number of seconds (0 is immediately).
Setting … | column | Integer32 | .1.3.6.1.4.1.232.165.3.10.2.1.4 |
| upsRecepAutoOffDelay mandatory The delay after going On Battery until the Receptacle is
automatically turned Off. A value of -1 means that this Output should
never be turned Off automatically, but must be tu… | column | Integer32 | .1.3.6.1.4.1.232.165.3.10.2.1.5 |
| upsRecepAutoOnDelay mandatory Seconds delay after the Outlet is signaled to turn On before the Output is
Automatically turned ON. A value of -1 means that this Output should never
be turned On automatically, b… | column | Integer32 | .1.3.6.1.4.1.232.165.3.10.2.1.6 |