pdu2GroupPowerFactor

CPQPOWER-MIB · .1.3.6.1.4.1.232.165.7.3.1.1.24
MIB view Table view

Object

column mandatory Integer32 
A group PF value.  Units are in thousandths, for example a power factor
of 0.958 would be returned as 958, and 0.92 would be returned as 920.  
A negative value indicates that this object is not available.

Context

MIB
CPQPOWER-MIB
OID
.1.3.6.1.4.1.232.165.7.3.1.1.24
Type
column
Access
readonly
Status
mandatory
Parent
pdu2GroupEntry
Table
pdu2GroupTable
Siblings
26

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
pdu2GroupIndex mandatory
Index for the Pdu2GroupEntry table.
columnInteger32.1.3.6.1.4.1.232.165.7.3.1.1.1
pdu2GroupVoltageThUpperCritical mandatory
Upper critical threshold. Units are millivolts. A negative value indicates that this object is not available.
columnInteger32.1.3.6.1.4.1.232.165.7.3.1.1.10
pdu2groupCurrentRating mandatory
Rated current capacity of the group. Units are milliamps. A negative value indicates that the hardware current capacity is unknown (it will always be unknown for custom groups).
columnInteger32.1.3.6.1.4.1.232.165.7.3.1.1.11
pdu2GroupCurrent mandatory
A group current measurement value. Units are milliamps.
columnInteger32.1.3.6.1.4.1.232.165.7.3.1.1.12
pdu2GroupCurrentThStatus mandatory
Status of the measured group current relative to the configured thresholds.
columnEnumeration.1.3.6.1.4.1.232.165.7.3.1.1.13
pdu2GroupCurrentThLowerWarning mandatory
Lower warning threshold. Units are milliamps. A negative value indicates that this object is not available.
columnInteger32.1.3.6.1.4.1.232.165.7.3.1.1.14
pdu2GroupCurrentThLowerCritical mandatory
Lower critical threshold. Units are milliamps. A negative value indicates that this object is not available.
columnInteger32.1.3.6.1.4.1.232.165.7.3.1.1.15
pdu2GroupCurrentThUpperWarning mandatory
Upper warning threshold. Units are milliamps. A negative value indicates that this object is not available.
columnInteger32.1.3.6.1.4.1.232.165.7.3.1.1.16
pdu2GroupCurrentThUpperCritical mandatory
Upper critical threshold. Units are milliamps. A negative value indicates that this object is not available.
columnInteger32.1.3.6.1.4.1.232.165.7.3.1.1.17
pdu2GroupCurrentCrestFactor mandatory
Current crest factor. Units are in milli, for example a crest factor of 1.414 will be returned as 1414. A negative value indicates that this object is not available.
columnInteger32.1.3.6.1.4.1.232.165.7.3.1.1.18
pdu2GroupCurrentPercentLoad mandatory
Current percent load, based on the rated current capacity. Units are percentage, for example 80% will be returned as 80. A negative value indicates that this object is not avail…
columnInteger32.1.3.6.1.4.1.232.165.7.3.1.1.19
pdu2GroupName mandatory
A descriptive name for the group.
columnOctetString.1.3.6.1.4.1.232.165.7.3.1.1.2
pdu2GroupPowerVA mandatory
A group VA value. Units are VA. A negative value indicates that this object is not available.
columnInteger32.1.3.6.1.4.1.232.165.7.3.1.1.20
pdu2GroupPowerWatts mandatory
A group Watts value. Units are Watts. A negative value indicates that this object is not available.
columnInteger32.1.3.6.1.4.1.232.165.7.3.1.1.21
pdu2GroupPowerWattHour mandatory
A Watt-Hour value for each section. Units are WH. This value can be reset to 0 using GUI. In that case, the pdu2GroupPowerWattHourTimer will be reset as well. A negative val…
columnInteger32.1.3.6.1.4.1.232.165.7.3.1.1.22
pdu2GroupPowerWattHourTimer mandatory
Timestamp of when group Watt-hours (groupWh) was last reset.
columnOctetString.1.3.6.1.4.1.232.165.7.3.1.1.23
pdu2GroupPowerVAR mandatory
A group VAR value. Units are VAR. A negative value indicates that this object is not available.
columnInteger32.1.3.6.1.4.1.232.165.7.3.1.1.25
pdu2GroupOutletCount mandatory
The number of outlets in each group (breaker).
columnInteger32.1.3.6.1.4.1.232.165.7.3.1.1.26
pdu2GroupBreakerStatus mandatory
Only applicable to groups with breaker. Indicates whether a breaker is turned off or on.
columnEnumeration.1.3.6.1.4.1.232.165.7.3.1.1.27
pdu2GroupType mandatory
The type of the group. (5) has no breaker
columnEnumeration.1.3.6.1.4.1.232.165.7.3.1.1.3
pdu2GroupVoltageMeasType mandatory
Value indicates what input voltage is being measured in this table row - single phase voltage, phase 1 to neutral, phase 2 to neutral, phase 3 to neutral, phase 1 to phase 2, phas…
columnEnumeration.1.3.6.1.4.1.232.165.7.3.1.1.4
pdu2GroupVoltage mandatory
Units are millivolts.
columnInteger32.1.3.6.1.4.1.232.165.7.3.1.1.5
pdu2GroupVoltageThStatus mandatory
Status of the measured group voltage relative to the configured thresholds.
columnEnumeration.1.3.6.1.4.1.232.165.7.3.1.1.6
pdu2GroupVoltageThLowerWarning mandatory
Lower warning threshold. Units are millivolts. A negative value indicates that this object is not available.
columnInteger32.1.3.6.1.4.1.232.165.7.3.1.1.7
pdu2GroupVoltageThLowerCritical mandatory
Lower critical threshold. Units are millivolts. A negative value indicates that this object is not available.
columnInteger32.1.3.6.1.4.1.232.165.7.3.1.1.8
pdu2GroupVoltageThUpperWarning mandatory
Upper warning threshold. Units are millivolts. A negative value indicates that this object is not available.
columnInteger32.1.3.6.1.4.1.232.165.7.3.1.1.9