cpIwfV5PstnGeneral
CPIWF-R-MIB ·
.1.3.6.1.4.1.164.20.5.1.8.1
Object
node
No description available.
Context
- MIB
- CPIWF-R-MIB
- OID
.1.3.6.1.4.1.164.20.5.1.8.1- Type
- node
- Parent
- cpIwfV5Pstn
- Siblings
- 5
- Children
- 11
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpIwfCadencedRingingTypeTable This table is used to map a cadenced ringing type identifier to
an actual ringing cadence. The index to the table is the value of
the Cadenced-ringing type sub-element contained i… | table | - | .1.3.6.1.4.1.164.20.5.1.8.2 |
| cpIwfPulseDurationTypeTable This table contains the mapping from a Pulse duration type
identifier to the actual pulse pattern. This table is indexed by
both the value of the Pulse type sub-element and the th… | table | - | .1.3.6.1.4.1.164.20.5.1.8.3 |
| cpIwfDurationTypeTable This table contains the mapping from the Duration type identifier
to an actual period of time (in milliseconds). This table is
indexed by both the value of the Signal sub-element … | table | - | .1.3.6.1.4.1.164.20.5.1.8.4 |
| cpIwfRateTypeTable This table contains the mapping from a Rate type identifier to
the actual pulse generation frequency in the CP-IWF. The index to
the table is the value of the Rate type sub-elemen… | table | - | .1.3.6.1.4.1.164.20.5.1.8.5 |
| cpIwfAttenuationValueTable This table contains the mapping from a Attenuation value
identifier, contained in the Enable-metering information element,
to the actual attenuation applied by the CP-IWF. | table | - | .1.3.6.1.4.1.164.20.5.1.8.6 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpIwfCallCollisionPriority This indicates whether, in the case of colliding V5 PSTN
ESTABLISH messages, the originating or the terminating call shall
prevail. | scalar | Enumeration | .1.3.6.1.4.1.164.20.5.1.8.1.1 |
| cpIwfDigitMaxMakePeriod Minimum make (offhook) period (in milliseconds) of digit pulse. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.8.1.10 |
| cpIwfInterDigitTime period (in milliseconds) between one digit
to another in a sequence of digits pulses. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.8.1.11 |
| cpIwfNationalProfile This object indicates which country is selected.
Each nationalProfile is accosiated with a country.
The specific country name was not specified to allow
maximum flexibility.
… | scalar | Enumeration | .1.3.6.1.4.1.164.20.5.1.8.1.2 |
| cpIwfMeterPulseFrequency This is the frequency of the meter pulses generated by the
CP-IWF. The allowed values are 12 kHz and 16 kHz. | scalar | Integer32 | .1.3.6.1.4.1.164.20.5.1.8.1.3 |
| cpIwfOffHookMinTime A time period in milliseconds. The loop closed periods shorter
than this are filtered out while the analog line is in on hook
state. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.8.1.4 |
| cpIwfOnHookMinTime A time period in milliseconds. A transition from off hook to on
hook state is reported by the CP-IWF, if a loop open period longer
than, or equal to, the onHookMinTime is detected… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.8.1.5 |
| cpIwfRegisterRecallMinTime A time period in milliseconds. Register recall detection is
enabled while the registerRecallMinTime is less than the
onHookMinTime.
If then the CP-IWF detects a loop open period l… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.8.1.6 |
| cpIwfDigitMinBreakPeriod Minimum Break (onhook) period (in milliseconds) of digit pulse. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.8.1.7 |
| cpIwfDigitMaxBreakPeriod Maximum Break (onhook) period (in milliseconds) of digit pulse. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.8.1.8 |
| cpIwfDigitMinMakePeriod Minimum make (offhook) period (in milliseconds) of digit pulse. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.8.1.9 |