cpIwfNationalProfile
CPIWF-R-MIB ·
.1.3.6.1.4.1.164.20.5.1.8.1.2
Object
scalar
r/w
Enumeration
This object indicates which country is selected.
Each nationalProfile is accosiated with a country.
The specific country name was not specified to allow
maximum flexibility.
The nationalProfile# selected, points to a range
of up to 10 Cadence-Ringing Types (cpIwfCadencedRingingType)
e.g nationalProfile1 enable ringing types 0-9,
nationalProfile2 enable ringing types 10-19, and so on
for ringing cadence table see cpIwfCadencedRingingTypeTable.
Context
- MIB
- CPIWF-R-MIB
- OID
.1.3.6.1.4.1.164.20.5.1.8.1.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cpIwfV5PstnGeneral
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
2 | nationalProfile1 |
3 | nationalProfile2 |
4 | nationalProfile3 |
5 | nationalProfile4 |
6 | nationalProfile5 |
7 | nationalprofile6 |
8 | nationalProfile7 |
9 | nationalProfile8 |
10 | nationalProfile9 |
11 | nationalProfile10 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpIwfCallCollisionPriority This indicates whether, in the case of colliding V5 PSTN
ESTABLISH messages, the originating or the terminating call shall
prevail. | scalar | Enumeration | .1.3.6.1.4.1.164.20.5.1.8.1.1 |
| cpIwfDigitMaxMakePeriod Minimum make (offhook) period (in milliseconds) of digit pulse. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.8.1.10 |
| cpIwfInterDigitTime period (in milliseconds) between one digit
to another in a sequence of digits pulses. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.8.1.11 |
| cpIwfMeterPulseFrequency This is the frequency of the meter pulses generated by the
CP-IWF. The allowed values are 12 kHz and 16 kHz. | scalar | Integer32 | .1.3.6.1.4.1.164.20.5.1.8.1.3 |
| cpIwfOffHookMinTime A time period in milliseconds. The loop closed periods shorter
than this are filtered out while the analog line is in on hook
state. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.8.1.4 |
| cpIwfOnHookMinTime A time period in milliseconds. A transition from off hook to on
hook state is reported by the CP-IWF, if a loop open period longer
than, or equal to, the onHookMinTime is detected… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.8.1.5 |
| cpIwfRegisterRecallMinTime A time period in milliseconds. Register recall detection is
enabled while the registerRecallMinTime is less than the
onHookMinTime.
If then the CP-IWF detects a loop open period l… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.8.1.6 |
| cpIwfDigitMinBreakPeriod Minimum Break (onhook) period (in milliseconds) of digit pulse. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.8.1.7 |
| cpIwfDigitMaxBreakPeriod Maximum Break (onhook) period (in milliseconds) of digit pulse. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.8.1.8 |
| cpIwfDigitMinMakePeriod Minimum make (offhook) period (in milliseconds) of digit pulse. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.8.1.9 |