cpIwfIsdnBriPortTxBytesPerCell
CPIWF-R-MIB ·
.1.3.6.1.4.1.164.20.5.1.4.1.7
Object
column
r/w
Integer32
In AAL2, the maximum number of payload bytes that can be inserted in one cell is 44. Padding bytes can be inserted to fill the cell and transmit it immediately. Default value 44
Context
- MIB
- CPIWF-R-MIB
- OID
.1.3.6.1.4.1.164.20.5.1.4.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cpIwfIsdnBriPortEntry
- Table
- cpIwfIsdnBriPortTable
- Siblings
- 15
Syntax
Integer32
Values & Constraints
Object Constraints
range: 10-44
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpIwfIsdnBriPortNumber The ISDN BRI port number. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.4.1.1 |
| cpIwfIsdnBriPortL1Status This object indicates the current state
of Layer 1 of the ISDN port, according to definitions in
ITU-T Recommendation I-430 11/95, paragraph 6.2 | column | Enumeration | .1.3.6.1.4.1.164.20.5.1.4.1.10 |
| cpIwfIsdnBriPortDChRxPCMStatus This object indicates the state of the
D Rx channel of the selected port | column | Enumeration | .1.3.6.1.4.1.164.20.5.1.4.1.11 |
| cpIwfIsdnBriPortB1ChRxPCMStatus This object indicates the state of the
B1 Rx channel of the selected port | column | Enumeration | .1.3.6.1.4.1.164.20.5.1.4.1.12 |
| cpIwfIsdnBriPortB2ChRxPCMStatus This object indicates the state of the
B2 Rx channel of the selected port | column | Enumeration | .1.3.6.1.4.1.164.20.5.1.4.1.13 |
| cpIwfIsdnBriPortDChTxPCMStatus This object indicates the state of the
D Tx channel of the selected port | column | Enumeration | .1.3.6.1.4.1.164.20.5.1.4.1.14 |
| cpIwfIsdnBriPortB1ChTxPCMStatus This object indicates the state of the
B1 Tx channel of the selected port | column | Enumeration | .1.3.6.1.4.1.164.20.5.1.4.1.15 |
| cpIwfIsdnBriPortB2ChTxPCMStatus This object indicates the state of the
B2 Tx channel of the selected port | column | Enumeration | .1.3.6.1.4.1.164.20.5.1.4.1.16 |
| cpIwfIsdnBriPortPhysicalPort This has the value of the ifIndex of the ifEntry of the physical ISDN BRI
port to which this CP-IWF ISDN BRI port is connected. The value of (0) has
the special meaning that this … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.4.1.2 |
| cpIwfIsdnBriPortChannelIdD The CID of the AAL2 connection transporting the D channel of this
ISDN BRI port over the AAL2 VCC.
When the cpIwfAal2ApplicationIdentifier indicates the presence of ELCP,
… | column | Integer32 | .1.3.6.1.4.1.164.20.5.1.4.1.3 |
| cpIwfIsdnBriPortChannelIdB1 The CID of the AAL2 connection transporting the B1 channel of this
ISDN BRI port over the AAL2 VCC.
When the cpIwfAal2ApplicationIdentifier indicates the presence of ELCP,
… | column | Integer32 | .1.3.6.1.4.1.164.20.5.1.4.1.4 |
| cpIwfIsdnBriPortChannelIdB2 The CID of the AAL2 connection transporting the B2 channel of this
ISDN BRI port over the AAL2 VCC.
When the cpIwfAal2ApplicationIdentifier indicates the presence of ELCP,
… | column | Integer32 | .1.3.6.1.4.1.164.20.5.1.4.1.5 |
| cpIwfIsdnBriPortRxBytesPerCell Selects the maximum number of payload bytes to be excepted in a cell in the
receive direction. the available range is 10 to 44
Default value 44 | column | Integer32 | .1.3.6.1.4.1.164.20.5.1.4.1.6 |
| cpIwfIsdnBriPortContCheck Specifies the initial method used for a new connection to perform
checks in the ATM network interface. The available selections are:
off-two-way, on-source, on-sink, on-two-way, … | column | Enumeration | .1.3.6.1.4.1.164.20.5.1.4.1.8 |
| cpIwfIsdnBriPortEchoCanceler Echo Cancellation activation
Default value = b1-On-B2-On | column | Enumeration | .1.3.6.1.4.1.164.20.5.1.4.1.9 |